Are drawable bond issues possible in  ECC 6 FSCM - Treasury & Risk Mgmt

We have been attempting to use drawable bonds from the debt side (versus as an investment) and have been unsuccessful in making it work as category 41 does not allow for issues and redemptions like product category 40 with product types 04X and 04Y.  The category appears to only allow for purchase or sale. Has anyone found a workaround to allow for Drawable Bond Issues to occur?  If so please point us in the right direction.
Thank you,
Lisa
P.S.  We have walked through the link below and been able to make drawable bonds work from the investment side.
http://help.sap.com/SAPHELP_ERP2005/helpdata/EN/2f/b9b5386f64b555e10000009b38f8cf/content.htm

Hi,
How are you tracking your TDS?  Through derived flows?  In that case you can have 2 different procedures and assign suitable procedure for the corresponding business partner.
you can check here for country specific settings.
http://help.sap.com/erp2005_ehp_05/helpdata/en/2d/dd27906749406eb46c6746c4a7ce2d/frameset.htm
Regards,
Ravi

Similar Messages

  • We are facing an issue in our COE SAP ECC 6.0 instance

    Hi,
    We are facing an issue in our COE SAP ECC 6.0 instance. The sequence of steps performed is as given below
    1. Start Vendor Creation using Create Vendor: Initial Screen
    2. Create Vendor : Address
    3. Create Vendor : Control
    4. Create Vendor: Payment Transactions
    5. Create Vendor: Accounting Information Accounting
    6. Create Vendor: Payment Transactions Accounting
    7. Create Vendor: Correspondence Accounting
    After the above steps are performed the system displays a message Vendor <V No.> was created in company code 1000
    If we try to use the above created Vendor in F-90 or FK02 ( Change Vendor details TCode) it throws an error as "Vendor has not been created".
    The table LFB1 doesnt have the Vendor associated with the Company Id 1000.
    Query: But does anyone WHY the Table is not being updated and WHAT needs to be done to make sure Updation happens in future.
    A quick response on this will be greatly appreciated!

    HI,
       Please chk in the config....
    SPRO>MM->Partner Deter->Partner setting in Rebate Arrangement->Define partner schemas for Rebate..
    Here please check the partner function "PI" is made mandatory...
    You can main the Partner function "PI" in the agreement itself...
    Goto-- txn.MEB2-- enter the agreement no... inside click the icon "Agreement Partner" or (Ctrl+F2) and maintain the partner function PI..
    Regards
    GK.

  • Payroll area change is not possible

    Hi,
    When we are doing promotion action, i.e, one paryoll area to another paryoll area, In actions whatever the date we are giving is taking, but when come to org assignment it is not allowing to save with that date  and throwing error " payroll area change is not possible at the end of payroll period"
    For example: In Actions start date is 04.01.2010, in org assign is not allowing to save the entry with that date, but if we give 01.01.2010, it is allowing to save the record. As paryroll period is starting of the month to end of the month, that is the reason it allowing the start date of the month in org assign, but user wants the record from his desired date..
    Please help me on the issue.
    Thanks & Regards
    Kumar

    Hi Kumar,
    Mid-payroll payroll area change is allowed for only a few countries including:
    Canada (country grouping 07), the United States (10), South Africa (16), Mexico (32), Taiwan (42), Finland (44), and Spain (04)
    Please check the notes below for further reference:
    1104733
    849363
    744563
    Regards,
    Dilek

  • Dear All,what are the major issues in implementation in sap hcm

    what are the major issues in implementation in SAP HCM project scope is PA ,OM,TIME, INDIA PAYROLL

    Hi Ramjan,
    Try to have a clear understanding of requirements and find the best solution in SAP. Keep as much as possible everything standard and based on SAP best practices.
    In PA look for a comprehensive enterprise structure. It's base for everything.
    DON"T do anything through development(ABAP code) as much as possible specially in PT and PY. Try to do claculation by PCRs and Schema.
    Regards,
    Omid

  • Standard function support for bond issueing?

    Dear all,
    Within Treasury and Risk Management, are there some standard functions to handle bond issueing?
    The requirement is mainly to record information of bond details, interest payment and repayment, and currently we don't take postings to GL and payments into consideration.
    Thanks and cheers,
    leechey

    Hi,
    Bond Issue is available as a standard in TRM.  You need to create a separate security account which is a liabilities account for issuing bonds.  Bond issues are also managed in similar way to other bonds through a security master.
    Please check the following for more info on bond issue:
    http://help.sap.com/erp2005_ehp_05/helpdata/en/48/c1f409568f04e7e10000000a42189c/frameset.htm
    Regards,
    Ravi

  • What steps are required to migrate GTS to ECC?

    Has anyone assessed and/or executed the migration from a standalone GTS instance to a consolidated instance where ECC and GTS are deployed?
    Our current solution is based on ECC 5.0 and GTS 3.0 which are installed in separate Abap stacks.  As part of our infrastructure consolidation we are hoping to integrate GTS into ECC.
    If you have performed this migration do you have useful time estimates that you might be able to share?
    Joe Love

    Christin,
    Is that recommendation based on performance constraints or is there a functional or specific reason for that recommendation?  We are looking to consolidate as many instances and underlying infrastructure components as possible during our upgrade and application consolidation is a part of that approach.
    If you can point me in the direction of specific OSS notes, etc. that I can use to communicate SAP's recommendation that would be very helpful.
    Joe
    Edited by: Joe Love II on Aug 2, 2011 10:39 PM

  • Adobe X (10.0) Scan/Print Issue (Possible OCR Issue?)

    Hello all,
    After the Marine Corps mandated upgrading from 8.x to 10.0, we've had some issue with scan documents not printing correctly.
    Documents appears to scan normally, just as before, however when we print them- they print with all the text blocked in solid black.
    Playing around with different scanner/Adobe settings, I believe I have narrowed it down to OCR issues.
    Scan to Picture = Prints perfectly (No OCR)
    Scan to Document = Prints with Black Blocks around the Text (w/OCR)
    To me that points to OCR.  
    Thoughts?  Tips?  Fixes?

    Hi,
    I tried reproducing this issue with HP Photosmart Premium scanner but could not replicate this issue.
    The scenarios I tried were:
    1: Scanning via Scan button on Scanner as a document i.e. an OCRed PDF and then taking a print out of that scanned PDF.
    2: Scanning using Acrobat along with OCR using Searchable Image OCR technique and then taking a print out of that scanned PDF.
    3: Scanning using Acrobat along with OCR using Clear Scan technique for OCRing and then taking a print out of that scanned PDF.
    In all the 3 cases, this issue was not visible.
    Could you please let us know your machine details, scanner and printer model you are using.
    And if possible can you please share any file (with OCR and without OCR) for which you are seeing this issue.
    Thanks.

  • Are there connections issues today

    Are there connection issues today I cannot send text or make phone calls  i am in B32

    Hi ,
    Thanks for joining the Community.
    There is a fault at your local mast and our engineers are working to get it up and running again as soon as possible.
    We are very sorry for any inconvenience caused.
    Thanks
    James

  • Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Thanks Kelly,
    The answers would be the following:
    1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
    Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
    The cells will be numeric, free text, drop downs, and some calculated numeric.
    Are we reaching the limits for UI performance?
    Thanks

  • Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
    trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
    The problem was the separated System Reserved Partition. After I removed using this instructions:
    http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
    The upgrade ran ok, and now have my DC as Windows 2012 R2.
    Hope that helps!.

  • What are the major issues to consider in code review? Or performance analys

    What are the major issues to consider in code review? Or performance analysis?

    I would not recommend you to try to optimize performance by checking the coding.
    There is the code inspector which can do all which makes sense automatically.
    The above mentioned points are not the real issues.
    Instead of code review you should execute test cases and measure the exection time.
    1. With STAD if you want to get good time measurement
    2. With SE30 and ST05, if you want to have data for further anaylsis.
    Check total time (SE30), check whether DB part is large, then go to SQL trace. Do the check mentioned here
    /people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
    to find the SQL bottlenecks.
    The major point about SQL problems is index support, if there is no proper index support then the performance will be poor. Be aware, that problems are only visible, if you tables are filled.
    In a test system where you have very little data, you will never encounter performance problems.
    Check also the Top10 of the SQ30 hit list.
    Be aware that a proper performance analysis is not a 5 minutes job.
    Siegfried

  • What are the major issues in implementation SAP CRM sales and CIC.

    Hi
    We are newly implanting the project to the mobile Manfaturing Company. Our Clint is going for are looking to implement the CIC interaction center win Clint and the Sales modules of CRM .
    We have some 3rd parry raw data with us with that raw data we are calling to the customers and we want create the opportunity in the CIC after that we will convert the opportunity as a sales with our other sales people. After  that  they will sale that product to that customers.
    We have the back end of the R/3 SD, MM modules implemented for Clint.
    Now 1) I want to know after implementation what are the major issues will come in the project normally for the conman  Sales and CIC Win Clint projects kindly give the some  issues normally come  and solutions  for the problems also.
    My motto is that if I know the issues I can make preparation  for that conman issues and I will make my project with good effective and smooth running ..
    with Regards,
    prakesh
    Edited by: prakesh on Dec 9, 2009 6:04 AM

    hi prakesh,
    firstly, cic winclient is an older version and obsolete so its better to implement the new crm version.
    secondly, in any case if you want to implement, then your 3rd party raw data has to be mapped with the SAP system which could be a problem. Middleware could be a lot of effort. Rest all depends on how much customization you need for your business requirement in cic and sales. In case you are implementing standard functionality mostly then no major complications are expected otherwise lot of development effort may be required.
    regards
    shikha

  • I absolutely hate the galaxy note 3!! I want to switch over back to iphone. There are so many issues with this phone!! There has got to be a way I can do this without spending crap ton of money. Its just ridiculous. I am livid

    Overheating
    Battery sucks
    Apps suck
    Phone freezes
    Phone cuts off
    Wall charger doesnt work
    Not good signal
    ^^ These are all the issues that I deal with this phone!! I HAVE HAD FOUR OF THE SAME PHONES. RIDICULOUS. They all suck the same!! I want to go back to iphone ASAP. But between the early termination fee and full retail price it is NOT WORTH IT. I am about to just terminate my service altogether. I am sick of being stuck and stressed out over a mobile device!

        Ambersikes17, we don't want you to cancel your service. Let's get your phone working properly. Are you using the original charger that came with the phone? If so, does it the phone respond to the charger if it is positioned in a different manner?
    Have you noticed if the freezing occurs with certain actions like messaging or using an application? Are these issues that you have had with all of the devices or just your current phone? Have you tried using your phone in Safe Mode? http://vz.to/1d0SZSq
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi All,
    What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi Jayachander,
    Have a look at these sap notes:
    For taking backup: Schedule from DB13 and get the exact command from Logs
    1841993 - SYB: How to schedule backups in DBA Cockpit
    1887068 - SYB: Using external backup and restore with SAP Sybase ASE
    How to restore DB
    1611715 - SYB: How to restore a Sybase ASE database server (Windows)
    Divyanshu

  • ESS - ws01000109 - You are not of the possible agents of the task

    Hi
    When I try to cancel leave using workflow ws01000109 it is raising message
    "You are not of the possible agents of the task ".
    Can any body tell wheather we have to maintain data in pa30 transaction for this problem.
    I have seen so many thread regarding this But I have not got any answer please reply for the same
    I have set all tasks as general task only.
    Edited by: balaji ramadas on Jun 8, 2009 4:01 PM

    Hello,
    You would be better off starting your own thread, and I hope that unlike the poster above you will share the result when you find a solution.
    Has your task been set to General Task? If not, try that.
    regards
    Rick Bakker
    Hanabi Technology

Maybe you are looking for

  • Unexpected quits, missing themes, missing fonts and broken file paths

    I created a project in iDVD 5 on the Powerbook at home, and then took the drive containing the project and all related files to my dad's office to burn it on his iMac G5 (the drive in the powerbook won't burn anything - separate problem). I put all t

  • Cache connect sql query timeout

    I have a question regarding SWT cache group. Is there a way to tell TimesTen how long to wait for oracle connection it is not avalible ? scenario: I have a SWT cache group and oracle database is down. Then I insert a new row into cached table. I get

  • How do I get back all the things at the top of the browser if someone made a mistake and set it so there is nothing but tabs at the top.

    Someone was playing around with the setup of my firefox homepage and now everything that is ususally at the top of the page like search engines ect are ALL gone... all I can access from the top of my page is new tabs. == This happened == Every time F

  • Complex HSRP Design Issue

    I work for a company and we want to implement HSRP. We are a small ISP and most of our customers come into a fastethernet port on subinterfaces. We have fastethernet 0/1.100 through 0/1.125. So 25 customers, each with their own network addressing com

  • Raw sockets

    hi i have 2 questions; first: i want to design a network monitoring and packet capturing tool for my school project i read the related topics but i have still doubts, if i should use whether java or c . i dont know which one is better for such a tool