Are drivers available somewhere for older hp designjet

I have an older HP design jet that works just great with my pc. Would like to plot using my MBpro, but HP doesn't have a driver.
Any ideas where to turn to?

You'll probably need to post the specific model of DesignJet you have before anyone can offer suggestions. If HP doesn't have drivers, it's not likely that you'll find any, but post the model and perhaps you'll get lucky. I'd suggest posting in the Mac OS X forum, though; this forum is intended for old, pre-G3 Apple hardware, and as such doesn't get a lot of traffic.
Regards.

Similar Messages

Does hp-v40,all in one is supported by windows 8? are drivers available?

does hp-v40,all in one is supported by windows 8? are drivers available?

Hi,
Based on the following, no more support from Vista ages that means at least 6 years:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=6063...
With luck, Windows 8 can find a generic, basic driver for your machine to print. Otherwise it's time to buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hi im wanting to purchase a ipad for a commercial mining boat, are there available plugins for a transducer allowing sonar and sidescan of the sea floor. Similar to the Lowrence HDS 8

Hi im wanting to purchase a ipad for a commercial mining boat, are there available plugins for a transducer allowing for sonar and side scan, similar to the Lowrence HDS 8 ?

Probably be best to contact the manufacturer of the device you are considering to use.
 Cheers, Tom

Are Drivers Available for Windows Vista Beta

I have a Audigy 2ZS platinum sound card and can not get it to work with Windows Vista Beta . Does anyone know where I can obtain drivers for this OS, or is there ant work around for this problem?
Thanks for any help, Li'vermaggot

Thanks for your answer John. I reworded my search last night and found the same post. I emailed Creative Developer Network as was suggested at the bottom of the post and received the info from Creative today. Basically, XP drivers will work with Vista, however 3D and a few other items will not work with Vista until Creative comes out with beta drivers for Vista.
I would imagine that Creative will wait a bit before developing or releasing drivers as the Enterprise version of Vista is the only one near general release for next summer. At this time Microsoft still does not know what retail versions will be released, ie: Home, Pro, Media Edition...
Thanks again, LM

My iTunes purchased movies will not sync to the New iPad(3) even though I have an HD version and an SD version. Are there specs somewhere for media files?

I have purchased a few movies in iTunes on the MacBook Pro and after dowloading, I am not able to sync them to my new iPad. I look at the contents of the download and I have an HD file and an SD file, I assumed it would sync the SD file automatically if it cannot handle the HD on the device (although it should be able to).
What are the different reasons a movie won't sync to iPad (frame rate, file size, definition, etc.) and what are the options to make these files compatable with my iPad? Can I rip them again or run them through a conversion utility? Is there a setting in iTunes somewhere I am missing?
Is there a post somewhere thatr already covers this? If so, I can't find it. Would be great to have a baseline of what can be handled by device so I can figure out how to make my media compatable.

the spcs page on this site state which video formats the ipad supports
I'd suggest converting your old videos to one of those formats
handbrake is a free program which does this for you
itunes used to be able to too when I right clicked incompatible media but don't see the option any more
or maybe it only show when one right click incompatible media and currently my lib don't have any
about the music then it's odd what formats are they?
if they are acc protected have you tried to remove the DRM this can be don using itunes as
apple don't use DRM for music any more

Are there available games for ipod nano 3g?

I cannot find any game for my iPod nano 3Gen in Apple store!!
Where I can buy games for this " old version" iPod?

There used to be in the Clickwheel Games section of the iTunes Store, but Apple recently removed this section and it doesn't look like it'll be returning. Sorry.
B-rock

Switched from canon to a lumix DMC ZS40 with Leica DC Vario-elmar 1.3.3-6.4/4.3-129 asph lens. When processing the raw fliles there is no lense profile information as there was for the canon. Is the file available somewhere for this camera lens combinat

?

[I tried to reply via e-mail some hours ago, but that reply didn't come through]
If your camera is a micro-4/3 or mirrorless camera then it likely has a built-in lens profile that is always on so there is nothing to select.
Photoshop ACR will tell you if a built-in profile is being used, but so far LR will not. Another way to tell is to open a raw file in a raw converter that doesn’t do lens corrections and see if you see more distortion, something like RawTherapee.

Some Apps are not available yet.

Majority of the important apps are not available yet for Q5. Any updates on when this will be available. Like Viber and WeChat. WeChat is already available and it says that it's compatible with OS 10 but why is it unavailable for the Q5 in specific? Isn't Q5 running on OS10 too!?

Hi and Welcome to the Community!
App compatibility is the same as it has always been for BBs. All apps must be specifically ported to the exact device model number AND major OS level in order to function. That means a lot of porting for the developers, and sometimes they choose to not do so. An app that functions on Z10, for example, will not function on the Q5 unless the developer specifically ports the app for the Q5 (and pushes it correctly out via BBWorld).
Likewise, it's up to those app developers to choose what platforms they desire to support. If they do not support a platform that you desire, your channel to push for it is with the developer directly, contact information for which can normally be obtained in the BBWorld catalog.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards.

Make older drivers available for downl

Creative, seeing that you really can't make drivers (or are intentionally making them **** to force people to buy?future shoddy goods), can you make it possible to download the two older drivers, because even though they are diabolical, I prefer the older drivers to the newer performance killers.

Never mind, blind as a bat. This thread can be deleted. [ ---EDIT--- ]?Scrap that, I just looked at the sticky links, and saw that there is no 28 Dec or 8 March drivers. Any chance of making these available again?!Message Edited by N-TWO-O on 03-7-200704:44 PM

Hardware Development Kits for Windows 10 Insider Preview are now available! (April 2015)

Hardware Development Kits for Windows 10 Insider Preview are now available! (April 2015)
Install the latest tools to build, test, and deploy drivers; test and measure your hardware running Windows; and customize, assess, and deploy Windows 10 on your hardware.
Become a Windows Insider
to get the latest Windows 10 Insider Preview.
Then,
get the tools:
Visual Studio Community 2015 RC
Windows SDK for Windows 10
Windows Driver kit (WDK) 10
Windows Hardware Lab Kit (HLK) RC for Windows 10
Windows Assessment and Deployment kit (ADK) RC for Windows 10
Known Issues
We will update this thread with any known issues for this release.

Hello ,
May I know ,where is the HLK download link
Is it likely HLKSetup.exe ??thanks
Windows Hardware Lab Kit (HLK) Technical Preview

Disappointed that drivers are not availa

Earlier this year I bought a Creative SoundBlaster card to replace an older one I had. Since 996 I have purchased various Creative produces (sound card, CD writers, etc.) because of the excellent support that I have come to expect in the past.
Yesterday my system suffered from a hard dri've crash, and all of my hardware drivers needed to be replaced. The CD for my sound card was lost late this summer when moving (the moving company lost several boxes).
Tonight, I came to the Creative web site to obtain the drivers I need for my sound card. Unfortunately it appears that if there is no update that Creative will not provide the driver for the card. And, instead, offers this message:
======================================
Couldn't find what you were looking for?
If you would like to purchase a replacement installation CD for your product, please contact us.
======================================
Appearently, the era of Creative's world class excellence in after purchase support, is now a thing of the past. Amd your marketing people think that charging for simple drivers is worth the negai've impact that it will have on customer loyality.
I'm sure that your market8ing people will make arguments such as, "well, with the cost of providing these drivers... etc, etc, etc," and work like hell trying to justify charging for simple drivers for a product that has alreday been purchased. The fact is, this action by Creative is just pure greed, plan and simple. :^/
So, this is to let you know that you have lost me as a customer for any future purchases. Tomorrow, I will be purchasing a new sound card, and will make sure that the manufacturer provides immediate online access to their drivers.
Tim

Thanks Slash02 for sharing your experience.
I think what I'm so angry about is the inconvenience they've incorporated into their support. If I could down;load the drivers on line for $2 or $3 I'd complain, grumble, and pay the few dollars. But to buy a CD, and wait a week or two before applying the drivers, is absolutely absurd.
I'm sure that if asked, everybody at Creative will point at everybody else, or complain about raising costs and so on (as if automated content deli'very were a raising cost). But chances are, this is the "brain child" of some guy in their marketing department.
I'm actually glad this happened now, because I'm going to be upgrading my video card soon, and I would have hated something like this to happen with an expensi've video card.
Thanks again,
Tim

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

Are drivers available somewhere for older hp designjet

Similar Messages

Maybe you are looking for