Are ECC 5.0 and ECC 6.0 components and can run without Netweaver?
Hi Experts,
As you know I'm new SAP Basis/NetWeaver on my new job. What is the difference between ECC 5.0 and ECC 6.0? how and where we install NetWeaver or
how we configured netweaver, is it a separate product? how it talks to Backend system? where do assigned roles in NetWeaver or in Backend system? How can we monitor SSL cert's? urgent...please help.
Thanks,
Frank.
Hi,
Your question needs lot of explanation but i would try to make it short and simple.
First SAPNetweaver is platform for all the new releases.Previously, in SAP R/3 4.6C the platform was SAP BASIS after that comes SAP R/3 ENTERPRISE which was SAP web AS then Came in mySAP ERP Edition 2003 main component was SAP R/3 Enterprise powered by SAP Netweaver and then mwSAP ERP Edition 2005 main component SAP ECC 5.( ERP centeral component).This ECC comes under my SAP ERP and it consists of other as well like portal,BI,SRM,SCM,SEM etc. SAP netweaver has its own features which u can search online and u will get lot of information on this platform which all u r getting in these new relases powered by SAP netweaver.SO it goes like
SAP R/3 3.1----->SAP R/3 4.6C>SAP R/3 Enterprise-->mySAP ERP2004 -
>mySAP ERP 2005.
There are two stacks in SAP web AS 6.4 ABAP and Java both has diffrent schema's.
where do assigned roles in NetWeaver or in Backend system?
For ABAP we can assign the roles from Tcode : pfcg
and for Java UME or Visual administrator .. it depends on the datasource.
For maintainning SSL u can view tcode :STRUST
I hope it has cleared ... if yes reward points
Similar Messages
-
I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive
How do I set up Time Machine to a shared drive on another Mac?
-
RDS and Gateway issues: Cannot get remoteapps to run without opening port 3389 on firewall
I am testing the setup of a small RDweb server to host QuickBooks for some remote sales users (4 users). For the most part, I have everything installed on one virtual server (using 2012r2 "Quick Start" session host deployment with the additional
Licensing and Gateway server roles added to the same server).
Everything works excellent with one exception. External clients cannot launch published apps without having port 3389 open on the firewall, even with the gateway role installed and the 'Deployment Properties' set to use the gateway. They can properly connect
to the RDweb site and view the published apps. The only way it works is open the firewall port (at which time I can disable the gateway or leave it configured and it works either way). Internally, everything works accordingly. I have followed the steps outlined
on many sites and have combed though the forum here to no avail.
Error received (summarized but is a well documented error):
remote desktop can't connect to the remote computer: 1- Your user account is not listed (it actually is) or 2- You might have specified the remote computer in NetBios format . . etc.
This is an existing SBS 2011 environment with additional virtual servers setup to host QuickBooks as outlined below:
Current setup:
Used Quick Start to install Remote Desktop Services in hosted sessions mode
Installed the additional roles for Licensing and Gateway server on same server
Configured wild card public certificates on all four services (Connection Broker(2), Web Access and Gateway)
Configured internal DNS to properly lookup our external FQDN of this server (ex. quickbooks.contoso.com points to quickbooks.contoso.local
One thing I noticed (just now) when I launch a published app and the firewall has port 3389 closed, a dialog box pops up directly after launching the app that warns about running a RemoteApp program and mentions the Remote Computer and the Gateway Server
as both the same (which it is); however, I would have assumed one would have listed the internal server's name while, instead, both are listed as the external FQDN. Either way, internal DNS should still allow it to properly route . . no? I don't know . . I'm
sure I am just missing something in a routing configurations somewhere. The gateway service is not properly looking up the RDweb service and then seeming not routing the encapsulated RDP session through HTTPS. . .. is my guess . .
I was reading about the "set published name" commandlet; however, I am not experiencing a certificate name mismatch; however, the certificate name does show up as *.contoso.com versus the actual name. I may just be grasping as straws now . . :)Ok, while I was in the server and looking over the BPA scans: "The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name." This may be due to it showing up as *.companyname.com
versus quickbooks.companyname.com. Anyhow. .. on to the list of actions above:
Changed RD RAP from "Select Active Directory" group to "Allow any network resource" and tested with port 3389 closed on firewall:
Worked. Initially it did not as I had used a custom shortcut created from earlier; however, after logging into the RDweb site again, the application loaded fine now (after the RD RAP change)
No error message appeared; however, I did notice that for a split second, the word Error did appear in the browser's tab title, but only very shortly. The app launch does take a bit longer too now (about 10-15 seconds, up from about 4 seconds with the port
open). This, I could care less about so long as we are properly forwarding the traffic through the gateway.
As for log entries, I had spend quite a bit of time in there and only had minor issues with loading user profile setting taking too long and policy settings preventing the redirection of USB devices. Looking again, no issues still. Just a bunch of informational
entries where I would connect before (and disconnect) but only with the port on the firewall open; otherwise, there was not an entry corrolating to when I would receive an error before. Now though, I am connecting after the RD RAP change and logs are showing
connections even with the port closed. These are in "operational", the "admin" log only shows the update to the RD RAP configuration.
Yes, the LAN's DNS server does relay the lookup information for my public FQDN as the local LAN address. No need for a local host record.
I have now added a new rule in our firewall to allow and forward UDP port 3391 traffic to the internal server hosting remote services
Thank you very much for your assistance on this matter. The RD RAP rule was default built during the creation of this services. Why is the resource not cross-referencing AD security groups? I could have sworn I created a group for that . . . -
HT1338 How can I tell how old my imac is and what operating system level I can run?
I am trying to figure out what is the highest level of operating system I can install on my imac. I do not know who old it is either.
thanksThis should help in identifying what iMac you have. When you have done so, enter in the support entry field the name of the OS you are interested in for technical requirements and match that with your iMac specifications.
http://support.apple.com/kb/HT1758
The odds are that Snow Leopard will be most recent you can install.
Ciao. -
I tried dragging from the site onto the toolbar, and even though that works on my Mac, doesn't on Win. 7. I saved Facebook to my bookmark toolbar in the bookmarks folder, but can't get it out of the folder.
My iphone 4s just developed a similar problem. Ultimately, after a visit to the Genius Bar at which I was offered a replacement phone for $149, I took the phone to a non-Apple repair shop which diagnosed the problem as tarnished pins in the docking connector and replaced the connector for $49.
The symptoms I experienced were that the phone would not pull a charge. I tried different cables, wall outlet versus computer USB connection, etc. The screen stayed black until I depressed the sleep button, at which time the red battery / lightening bolt symbol would flash three times and then the screen would go black.
If your battery is dead, that icon will not show up at all. If you get the icon, it means your battery is run down and needs to recharge, but the defective docking connector is preventing the battery from taking the charge. -
Can my CC account be installed on both my iMac and my laptop so that I can run software on both?
Hi all,
I'm sure this is a simple answer, but I have not found any thing on it yet.
Is it possible to have my account on both my computers to run my applications on both? I travel a lot so this is essential.
Thanks
DougYes - Cloud License http://www.adobe.com/legal/licenses-terms.html
-
I'm trying to share a folder between users on a single mac. I want both users to be able to read and write so the folder stays current on both accounts. I put the folder in "shared," set permissions on folder so other user can read and write, enabled file sharing, but can't find the folder on the second user's account. Any help?
Did you log out of one account and into the other or just used Fast user switching?
Is the permissions set to anyone?
When you move data to teh Shared folder is it copied or just moved?
If copied then it's not a folder both can access, just a way station like a USB thumb drive that things are coped too and off of likely.
You can run this #5 on each user account to reset the user permissions once they are taken back out of the Shared folder
Step by Step to fix your Mac -
Logical systems assignment when SRM and ECC are on 2 different servers
Hi SRM guru's,
What is the standard practice for Logical system creation and assignment when ECC and SRM are on 2 different servers.
I could not able to find which i created a logical system in SRM server which i created in ECC
Same for the ECC also.
how do i assign logical system of SRM to ECC
vice versa.
your prompt response is appreciated.
RegardsHi Sai,
Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
Logical System : <SID>CLNT<Client Number>
For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
You can refer the below document which eplains the creation of logical system and RFC destinations etc
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
Note: Only while configuring the RFC Destination, the servers will play a crucial role.
Regards
Kathirvel -
What are the difference in transaction codes in 4.6 C and ECC 6.0 HCM syste
Hi
What are the difference in transaction codes in 4.6 C and ECC 6.0 in HCM SAP.
Regards,
SanjayBelieve there will not be any change in Tcodes.
check these links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade for functional
https://websmp105.sap-ag.de/upgrade -
Pls let what are the differences between 4.7 and Ecc 6.0.
Hi all,
Could you please let me know, we are going 4.7 to Ecc 6.0.
Pls let what are the differences between 4.7 and Ecc 6.0.Try the [Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx].
Regards -
What are the differences between 4.6B and ECC
What are the differences between 4.6B and ECC ?.
ThanksRefer a similar post /message/1783778#1783778 [original link is broken] and my reply there in
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
Here are the Links
for SAP ERP Central Component 6.0
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
for 4.7 SAP R/3 Enterprise
http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
and for Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
You can pick up the similar Release Notes for any version you are interested in -
Japanese language extraction both bw and ecc are unicode.
Hi all,
I am trying to load the japanese language from ecc to bw.
Both ecc and bw are unicode system. Both bw and ecc has japense language installed.
I can see the data in the psa has japanse lanaguage but when i try to load the data i am getting an error.
zabc : data record 6301 (: a2890000) version (@#$@##) is not valid.
can anyone pls guide me thanksHi Gaurav,
I did happened to check all the links provided earlier before i started posting on this forum. and happened to raise a message to sap but havent heard abt it too.
thanks for the links
Thanks -
RFC connection error between BW 3.5 and ECC 6.0
Hi gurus,
We've defined an RFC destination between BW 3.5 and ECC 6.0. Connection test (SM59) is ok, but authorization one fails and ALEREMOTE users block. These users on both systems have good profiles. We look ST22 and find a runtime error on CALL_FUNCTION_REMOTE_ERROR. We've cleaned source system on BW and RFC destination and we've created one more time, but error doesn't disappear. We've looked OSS but don't find anything.
Any idea? Is there any other place (users, RFC) where we have to change user password on system?
Thanks a lot!
Regards,
Iván.
Edited by: Iván Cabezas Castillo on Nov 6, 2009 12:09 PMSolved!
This is because of the incompatibility of password handling between
640 and 700 systems.
We have to use a maximum 8 character long password with only capital letters (numbers are also allowed) for the user "ALEREMOTE".
1. Change the password for the user in SAP R/3.
2. Maintain the password in SAP BW for the RFC destination (transaction SM59 - Logon/Security tab)
3. Authorization test is now successful.
(SM59 - Test - Authorization).
Regards! -
SSO issue with BI 4.0 BW and ECC
We currently have SAP BW 7.3 BOBJ 4.0 ECC and SAP portals.
We have configured SAP BW, BOBJ and SAP Portal with SSO and that works perfectly fine.
The issue is that i have Crystal Reports running on ECC that have also to be published to the Portal.
All BW crystal reports run fine and ECC fails because of SSO -
What am i missing here -
Do i need to do something different for ECC
In CMC Authentication i have added SAP ECC and imported a role - So now i have 2 ids - one from BW and the other from ECC.
I know this is not the way to do it but it still does not work.
What do i need to do to have ECC and BW reports to work with SSO from SAP portal.
ThanksThank you for your reply Ingo
I assume that your BusinessObjects Server has the SAP Authentication for BW and ECC configured ?
*Yes *
Are the reports for BW and ECC been called from the portal ?
Yes
if so then you have one BOE Server, 2 SAP environments and 2 SAP authentications configured and to achieve SSO for all systems you will have to combine the 2 SAP Systems via SNC (for XI 3.1) or via the SSO Token Service in BI4
We are on BI4 and we have set up SSO Token for BW -
Are you saying that we have to set up SSO token for BW as well as ECC -
In CMC - Authentication - SAP - Options -SAP SSO Service - it does not give me an option to have 2 systems
How do i add ECC system there too.
Regards
Ryan -
What is the difference between ECC 5 and ECC 6.0
Dear Experts,
Can any one tell me in detail the difference between SAP R/3 versions ECC 5 and ECC 6 functionality wise in MM mdoule?
To be specific what are the new features in MM being added in ECC 6.0 when compared with ECC 5.
Request your help in this regard.
Rgds,
Uzair
Edited by: Mohd Uzair Hussain on Jul 23, 2008 5:35 PMHi,
Refer following link;
[SAP ERP Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/]
Following are the basic differences as far as MM Module is concerned;
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
- Goods receipt
- Goods issue
- Transfer posting
- Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
- To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
- Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
- Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
- Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
- 107: Goods receipt to valuated goods receipt blocked stock
- 109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with u201CNon-Hierarchyu201D display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location
Maybe you are looking for
-
I had to do a restore on my computer and lost mozzilla beta 7 how do I get it back
I noticed that I had a new link for beta 8 I clicked on it and it crashed my whole computer after alot of research I finally had to do a restore. When I did that everytime I tried to open any of my shortcuts I kept getting the crash reporter so I wou
-
Slow Broadband. BT does not seem to want to fix an...
In late June, I moved house within Cambridge and decided to stay with BT. The advisor told me that I should get a speed of around 4MB. I also checked with the BT, Sky and Virgin web sites and they all stated that I should get a good fast service. Sky
-
I can hardly see calendar alerts on macbook. How do I get it back to where I can easily see them?
I have a macbook pro 17" bought in 2011 running OS X Yosemite Processor 2.3GHZ Intel Core i7, Memory 8GB 1333MHz DDR3, Intel HD Graphics 3000 512MB. For the last two days my calendar alerts and notifications are appearing so light that I can hardly
-
My MBP shuts down when installing OSX
My MBP overheats and randomly restarts when using it. When I went to reinstall OSX Snow Lepoard it almost completes the install then the MBP shuts itself down. If you can help me I would greatly appreciate it!
-
Upgrade from 4.7 to ECC 6.0 and MICR no longer printing
Hello, We are in the process of upgrading from 4.7 to ECC 6.0. Our checks in FI and HR which have MICR fonts/lines are no longer printing the MICR lines. Any ideas on what to check?