Are function keys different on Air?

I am trying to use Adobe InDesign and the keyboard commands for paragraph styles are not working. Shouldn't I be able to use the keys "function/command/j" for example to duplicate "command/1" on my iMac?

Thanks for all the advice. I now understand the limitations. Most helpful suggestion to get a USB numeric keypad. I will try that.

Similar Messages

Function keys working in reverse - G62224CA

The function keys on my keyboards are working in the opposite manner. Whenever I press any of the keys from F1 to F12 they perform the multimedia actions or their enhanced action. For example, if I press the F2 key the brightness of my laptop screen would lower. It should not work like this. I should be pressing Fn+F2 for the brightness of my screen to lower. The problem here is that I can't use Alt+F4 to close windows because its reversed, I instead have to press Alf+Fn+F4. I have already search for an answer online and I can only find that NumLock is supposed to be locked. But, it's a laptop - I have no such key. Looking for alternatives if anyone has found a solution. Thank you in advance.

The BIOS solution did work on my new HP Pavilion 17-inch laptop. Thank you for that. I see that HP uniquely considers the Function keys (F1-F12) to be "ACTION KEYS." This deviates from the industry standards. They are Function keys to the rest of the PC world. The graphics on the keys should have the F1 through F12 in large type, rather than tiny type. It's not good that HP has chosen its own path for how keyboards work. People who use Windows on a variety of computers rely on the keyboards to all work in similar ways. If HP wanted to build this feature in, it should 1) be well-documented and 2) be an option, not the default setting.

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to reprogram a different key to be my plus/equals key? Can I program a function key? key

I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?

Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty.

Letter keys are not working on MacBook Air when playing games?

Hello. I'm using 10.6.6 on my MacBook Air 2.1 (2009 model).
I've got a really strange issue when playing games (any game produces this issue). ONLY the letter keys aren't working. The rest is working - numbers, function keys, arrows, tab, enter, delete, etc. Only the keys A to Z are not working.
This happens both on native games (like Hedgewars from App Store) and ported ones (like Need for speed).
What's the issue?
Thank you!

Bump.

Some function keys are not working on my Portege R830

Like others, I have a new Portege R830 and experienced the sudden unexplained loss of functionality of the 13 function keys. My os is a native windows 7 64bit install, with office 2010 installed afterwards. I have the SSD model.
I followed the instructions, removing TVAP and re-installing, and I have both VAP and flashcards operational. I used the USA site drivers for the latest set (the Australian and European driver sets are older versions and different).
Most, but not all, of the function keys are now working again. What isn't working are as follows:
- F12 functionkey not operating
- volume up and down keys not operating - what I am most interested in - any suggestions on how to get functional again please?
also, on re-installing VAP, I lost functionality on ecobutton. Any suggestions on how to get working again?
thanks in anticipation

Hi
You are on the right way dude the VAP and Flash Card Support Utility controls the FN buttons. If you have an European notebook model, I would recommend using the drivers from Toshiba European driver page but generally speaking there should not be a difference in the software
However, in my case restarting the Flash Cards helps to get back the FN buttons functionality. The Flash Cards can be found in All Programs -> Toshiba -> Flash Cards.
So check if restart would help you.
Regarding the Eco button: ECO Utility controls this button tooso would recommend installing/reinstalling this software beside the VAP

HP Pavilion Laptop; Only Special Function Keys are Working

I got my first HP laptop, a HP Pavilion 17-e049wm Notebook, refurbished a few months ago when my original quit out. Until recently, I've been more than happy with its performance. However, a few weeks ago the keyboard started acting both weird and also not working. I'll try to provide as much information as I can, and thank you in advance for your assistance!
Circumstances before the event:
-The night before, my keyboard worked one hundred percent fine. I played some games and went to sleep with it closed and hibernating like I always have. The next morning, I took it up with me to play music as I showered. Before I'm accused of water-damaging it, my laptop was very far from shower, so no direct water contact occured, and also we shower with the door open, so there was no build up of steam or humidity that could've done it that couldn't be present in any other situation. I knew that it worked that morning, as I must have logged in to play my music. After closing it and bringing it to my car (without drops or any other jarring), I learned a few hours later that my keyboard had stopped working.
-My house doesn't have internet and I havn't recently installed anything, so it's doubtful that some kind of software did it to me.
What the keyboard does(n't do):
-Almost every key doesn't work. The letters, esc, enter, shifts, fn, numberpad, caps lock, etc. I've tried them each, and none work.
-There are two exclusions to the above statement:
-The 'special' function keys; All of the keys that share space with my function keys work fine. So my mute, pause, change display, brightness controls, help shortcut, airplane mode, etc. work. So everything from F1 to F12 work.
-Before anyone assumes that my fn key is stuck or something, the special part is the default. On my keyboard, you hold down the fn key to do the normal fn key functions (f11 skips to the next song, fn+f11 does fullsrceen).
-Also, I'm not sure if my 'normal' functions work. I tried holding fn on this USB keyboard and then the f# keys, but the 'special' function still is the one that works. However, as I have no control, I don't know if that would have happened anyways.
-The second exception, which makes me doubt that it is a hardware problem, is that if I hold 'X' and 'C' at the same time, the brightness lowers, as if I tapped my f2 key. Each of those do nothing on their own, but when pushed together, they act identical to the f2.
-Another thing is that my ported keyboard's caps lock indicator light still shines when either the USB or on-screen's caps lock keys are used.
What I've tried:
-Turn it off and back on
-Turn it off, take out battery, hold the power button, wait, turn on with/without battery
-Uninstall keyboard driver, restart
-Summoning a demon
-Tried to update driver (can't, up-to-date)
-Check status through device manager (claims that it's running fine)
I've basically tried everything I could find that seemed relatively useful from browsing the forums, but it's on my third week keyboardless, nothing works, and I'm so tired of using my girlfriends pretty, sparkling and bedazzled, purple USB keyboard from her days in middle school. If nothing works, I'll have to resort to the system resets and lose applications and my files, which would be a mad bummer yo.
Thank you again for your help, internet.

@cbowman08 ,
Hello and thank you so much for posting on the HP support forums. Now please I am not stating you have done anything wrong in any way. This kind of thing happens all the time.
You do not need a bunch of steam to cause an issue with water for one thing.
Inside your notebook is a huge differential in temperature zones. If you take a notebook into a shower room even if your water is slightly above room temp there is ample moisture in the air.
Air has to travel and if your notebook was on the counter and it is between your shower and the door, any moisture in the air gets to get heated way up and then gets to cool way down and gather on the little metal bits in your notebook.
It only takes one drop of water the size of a pin head to bridge a connection and cause a short.
I hope this is not the case. I am hoping that the connection cable for your keyboard has come loose.
So to see if this is just a loose connection instead of a bit of moisture causing the issue here is a link to your maintenance guide,
Maintenance and Service Guide
This will show you have to get your system apart to check they keyboard connection.
As well here is a link to how to gain access to the keyboard and its connection.
HP Pavilion 17 Replace Keyboard HDD SSD Ram New Model Laptop.
Check to make sure the keyboard cable didnt just come loose. Very easy fix. If it is connected and nothing is loose then you are looking at a replacement keyboard or if the board did get some moisture on it from condensation then you will need to have it sent in for repair.
If that is the case you will want to contact phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I am hoping for the keyboard connection coming loose here.
Have a great day and thank you again for posting let me know how it goes.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Function key defaults are not working

I've ran into an issue where the default function keys no longer work. The F1 key for instance does not decrease my brightness, nor does F12 increase my volume. All of the function keys will produce a "thump" sound from the Macbook Air, like I've typed a bad keystroke, or an invalid keystroke for a text field.
What I've done:
1. The "Use all F1, F2, etc. keys as standard function keys" is Unchecked in System Prefs
2. Rebooted, and cold booted many times
3. I've reset PRAM and SMC many times (probably 10 each)
4. I've clean installed OSX Mavericks and the stock install shows the same symptoms.
I'm hesitant to believe this to be a hardware issue because the keys themselves will work if I manually set an action for them (a custom shortcut to open an application for instance).
Has anyone else seen a similar problem or know of any other things I can try?

See if a Safe Mode boot helps.
Startup your Mac in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () drop down menu then try the keyboard.

MacBook Air default function keys

On F5 and F6 there is a designation to decrease and increase something. I'm getting the feeling that these keys are not available on the MacBook Air, in fact they are not present on my bluetooth keyboard I use on my Mac Mini. I am curious what there function would be and what device they are used for?

F5/F6 keys are there to decrease/increase keyboard backlight.
There are some models of Macbook Air that came without keyboard backlight.
So those keys are not "functional" in those models.

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Function keys are not working on a paired apple bluetooth keyboard

hello, I just got this apple bluetooth keyboard and paired it to my ipad2. The letter and number keys are working perfectly fine, but my ipad will not respond to F1 to F12 keys,I tried Fn+F1-F12 they are not working. Then I tried to restart both my ipad and keyboard but the problem is still there. Additionally, Command+arrows can't function either. command+space is working though. Could some one please help? thanks a lot!

It might have been functionality that Apple has removed in the current version of iOS. This old web article says the function keys worked in iOS3, but that's a couple of years ago:
http://socialtimes.com/apple-bluetooth-wireless-keyboard-function-keys-work-with -the-ipad_b47087

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

Certain function keys are non-responsive.

Morning folks,
I've been pulling my hair out trying to get to the bottom of this issue.
ProBook 6460b.
Win7x64
Certain functions keys won't work within windows.
External display toggle Fn+F4, And brightness functions Fn+F9, and Fn+F10, won't function in windows.
The brightness keys function normally in the bios so I know the keys are operational.
Steps already taken:
Updated the Bios
Uninstalled and Reinstalled Video Driver
Reinstalled Hotkey support driver
Any other suggestions?

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My function keys are not working. How can I get them to work again?

None of my function keys are working on my macbook pro. I can't adjust the volume, brightness, or any other of the keys.
Please help!

Just to clarify, it only works when the phone is plugged in and charging. What happens when you try to activate it? Is there any error message?

My Macbook Pro (bought in 2013) function keys are not working

My Macbook Pro (bought in 2013) function keys are not working. The function keys ie the volume and brightness are not working at all both with one single tap and with the function button. I have checked the settings for the keyboard but nothing seems to stand out that is making the keys not work?
Please can you help?
Thanks
Kat

Some might suggest resetting the SMC, but I don't really think that will solve the problem. You can try, though.
I would suggest, since you're still under warranty, taking your machine to your local Apple Store/AASP and letting them fix the problem. It could be any sort of hardware problem. Only the Apple techs have the tools to properly diagnose and repair the machine.
Clinton

What are all the Function Keys for on my new KU-0841?

I just got an HP KU-0841 Keyboard and want to know what the Function Keys are for F1-F12.
Where can I learn about how to use them? Thanks

Hi,
Depending on application, or game. For example on one application which I use daily
F1 = Help (nearly all applications use this),
F2 = Slpit screen
F3 = End
F4 = Expand
F5 = Find / Re Find
F6 = Change
F7 = Up
F8 = Down
F9 = Swap
F10 = Left (one screen)
F11 = Right (one screen)
F12 = Cancel
Again, DEPENDING ON applicantion, you have to learn from application. Some applications allow you to re-program those keys.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Are function keys different on Air?

Similar Messages

Maybe you are looking for