Are genuine Lenovo parts still available for the T series?

So far, I've been quite lucky with my T60p Thinkpad, as I haven't had to service is since purchasing it in 2006.
Now I'm replacing the hard drive (with a Hitachi Traverstar) because it's starting to fail some system tests, but I also anticipate having to replace the heatsink fan, as I'm sure after this many years and so much dust (which I blow out periodically) it's bound to fail eventually.
I looked up my Lenovo part number for the heatsink -- it is 41V9932 (Im not sure if the fan is possible to replace without replacing the whole heatsink assembly?).
But where can I buy geniune Lenovo parts for these laptops? I searched the "shop Lenovo" store on this site, and they do have some things but not those internal components that I need.

Welcome to the forum!
Try IBM directly. Expect to pay a pretty penny there.
Also try eBay, plenty of new fans available there.
It is possible to replace just the fan, however, my personal choice is to replace the entire assembly. YMMV.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Thank you.

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Warranty has gone in October 2013..
I want to send back my macbook air back to apple store. The problem is that I bought it from US and now, I'm using it in Myanmar. If the program is free of charge for my device, it's worth trying to send back to US. Since mine is broken, I'm afraid Apple will take charges for reparing.
So, if anyone having the same problem as me, I would like to get suggestion....
Thank you!!

I have no idea about how to handle the international aspect of your question.
But here is the Apple writeup about the problem and the remedy. Maybe that will help you.
http://www.apple.com/support/macbookair-flashdrive/

Are there any sport armbands available for the iphone 4 yet??

i've been looking all over. The only ones that i see specifically for the iphone 4 are from Belkin and they're not available yet..

Marware looks like they have some options. Some may be out of stock on the site, but other vendors look to have them if you do a google search for the model you want.

Is there a protective casing still available for the ipod classic?

Hello, I am searching for a version of the ipod for my autistic brother as a replacement for his portable CD player. I was thinking of going with the ipod classic, as the buttons may be less confusing for him than a touch screen. My largest concern is the possibility of him dropping the ipod. He is 6 foot, and has no recent history of dropping his CD player, but that is still a concern. Is a protective case for the ipod classic still available? Any other suggestions as to what would be good for him? Thanks

Sorry, but there is not. There may be for the iPod Touch, iPhone, or iPad though.
B-rock

Are there example VI's available for the Agilent 81250?

I'm using an Agilent 8403A VXI mainframe for Parellel Bit Error Testing. The 0 slot houses an Agilen 8491B module and uses a Firewire interface to an external PC. The programming environment I would like to use is LabVIEW 7.1. I was wondering if any example VI's have been developed for this type of application.

Hello,
I could not find any examples for your specific hardware in LabVIEW. Have you tried checking the NI website? You can also open the LabVIEW Example Finder and do a search for VXI. There are some VXI examples there. You can find the Example Finder in LabVIEW by going to Help>>Find Examples...

Getting error NSURLErrorDomain error -1100 when trying to get updates from the App Store. Are updates still available for OS below Maverick?

Started getting this error today (01/14/2014) when trying to download updates from the App Store for my MBAir 11" mid 2013. Error: NSURLErrorDomain error -1100
Are updates still available for OS below Maverick?

That error may result from connecting to a cellular network via a phone or mobile broadband device. If that's what you're doing, try another network.

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR5?

I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR 5?

Camera Raw plug-in | Supported cameras
The Sony RX100 III was first supported in Lightroom 5.5.
There will be no updates for older versions.
So your choices:
Upgrade to Lightroom 5, or
Download the free Adobe DNG converter, convert all Raw files from the RX100 III to DNG format then edit the DNGs in Lightroom 4.4
Photoshop Help | Digital Negative (DNG)

Is the ACR 8.4 a update bad? it's still available for installation

is the ACR 8.4 update bad? it's still available for installation. Has anyone updated and is not having problems?
I really don't want to uninstall all of the CS6 suite

I just received a replacement file to test for the camera raw plugin. This fixed the problem on my installation of CS6 that had updated to 8.4 and was not able to launch Camera Raw from Bridge, and also Bridge was not able to view or alter any Metadata.
There was no need to reinstall PS, just a direct replacement of the file. I don't know how Adobe will be supplying the fix, but as of now, I would not recommend updating to Camera Raw / DNG 8.4 if you are using CS6 until the new file is available.
thanks to Adobe for the quick fix.

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

"SubReq" is still available in the stock/requirements list.

Hi SAP guru's,
In the subcontracting scenario for our client, the required quantity of child component will be provided to the subcontracting vendor.
For one particular purchase order,
Subcontracting PO for parent material "A" - qty 4284
Child component "B" - qty 24,996 provided to the vendor
"SubReq" is still available in the stock/requirements list of child component referring to the closed purchase order (delivery and invoice posting completed for full quantity, no open item quantity).
What could be the reason for this issue and what is the best solution.
Thanks in advance for your valuable reply.
Reddy.

Hi Csaba,
Thanks for your immediate response to my query.SubReq should not appear in MD04 w/o existing requirement (e.g. PO) as a standard but it is observed for this PO.
The OSS note "115899- Correction report for subcotractor requirements" is not giving the direct solution, but the content in this note may be useful to analyse and resolve the issue which we are trying.
Thanks & Regards,
Reddy GY.

Is numlock still available in the Function keys (F1-F12)

Hi all,
I have to use the numpad very frequently, so I would like to know if there is any way I can use the numeric keypad in the new Macbook?
Is the old numlock button still available in the Function Keys (F1-F12)?
Thanks

I'm not precisely sure about the situation with the ']' key. It sounds as if perhaps the keyboard doesn't match the language or region of the system. Without knowing more, the first place to go would be the Keyboard tab in the Keyboard preferences pane.
There are buttons there to set the type of keyboard connected, and also check the settings of the modifier keys, including 'Caps Lock', 'Shift', 'Command', and 'Option'.
As far as setting keyboard shortcuts for 'F' keys, if you go to the *Keyboard Shortcuts* tab in the Keyboard preference pane and click on the categories in the left column, you should be able to see current settings, and define new ones if necessary.
!http://img228.imageshack.us/img228/5186/scottdartve1.png!

Are Tiger system updates still available?

If I install Tiger from a retail disk on my iBook 3G, are the combo updates still available through the software updater?
thanks

"Combo" 10.4.11 updater PowerPC-based Macs - http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
Guide to files needed to update Java on Tiger 10.4.11 - http://discussions.apple.com/thread.jspa?messageID=13041410&#13041410
For others such as Quicktime I'd run Software Update to see what the newest version is, but I prefer to do the download myself just so I know it is safe and sound on my computer before doing the update.
If you use Software Update to do Java, keep on running it as it is incremental, not a combination updater.
Don't foget to use Disk Utility to repair permissions before and after updates.

After I configure my time capsule to my newly replaced macbook hard drive, are my old backups still available?

After I configure my time capsule to my newly replaced macbook hard drive, are my old backups still available?

How old was this backup? It sounds like it was at least several weeks old.
You can look directly in the TM backup for the music.
1. Connect to the external HDD the backup is kept on.
2. Open a Finder window and select the backup drive in the left hand panel. Double click into the folders until you see a list of folders with dates.
These are the incremental backups. You can start at the top or the bottom of the list but I suggest you double Latest/<HDD Name>/Users/<Account Name>/Music/iTunes/iTunes Media/Music. From this location you can start looking for the "missing" music. When/if you find it you can simply drag-n-drop to ~/Music/iTunes/iTunes Media/Music on the internal HDD.
If the music is actually not in the backups (for whatever reason) then you've got a problem.
You can download the uploaded files from the cloud by deleting the affected tracks from the iTunes library (but not the cloud!), highlighting multiple tracks at once, right-clicking and choosing "download."

Is there a virus protection software available for the ipad 2?

IS there any form of virus protection softward available for the ipad 2? Have seen AVG etc for ipad 2 talked about.

It's not strictly correct to say there are no viruses or to be more accurate 'malware' for i-devices as there are
There isn't. Provide links/proof if there are.
If you really are an admin for McAfee then you should know what a virus is, and that there are none for iOS. If there were a virus for iOS it would be all over the news. It is also true to say there is no malware for stock iOS devices. If you've jailbroken your device, then maybe so, but you've purposefully put yourself at risk.
hence the last 2 iOS updates which were patching various vulnerabilities.
Yes, just like any OS, there have been vulnerabilities that, potentially, could be used for malware purposes, but iOS has been available for over 4 years and still not one virus or malware breakout. If you knew anything about the way iOS works, and how apps get approved, installed and run, you would know why a virus is virtually impossible, and even a trojan is very unlikely.
Apple has a policy of never discussing security issues as they like to pretend that their products are totally immune, but they aren't.
Like lots of companies, Apple don't discuss security vulnerabilities BEFORE they are fixed, because that would be irresponsible and make it easier for hackers to exploit. Apple have never pretended their products are totally immune. Use your brain, if Apple thought their products were immune, why would they release regular security updates?
Companies like McAfee make money out of spreading FUD and making people believe they have to fork out lots of money for so-called "protection" that in most cases they don't need and doesn't work for unknown issues anyway. And now they're trying to prey on uninformed Windows users, who after years of being subjected to the real threat of viruses and malware now think they need the same for iOS devices.

Are genuine Lenovo parts still available for the T series?

Similar Messages

Maybe you are looking for