Are implicit DB commits initiated when there are Sync or Async RFC call

BC414,Page 3-8 says, whenever there are synchronous and asynchronous rfc calls,implicit DB commits are always initiated.
But I test it in ABAP program as following steps.
1: insert data into dbtable.
2: Call Function "RFCFunction".(within this function, insert data into dbtable).
3: Rollback Work.
All the data is not inserted into db table at all.
Are there anything wrong with my understanding?

Hi!
Strange behavior. Yes, every remote call (can) cause an implicit commit work (or is anyway linked to commit work, 'in background'...).
Also implicit commit works should end a database LUW -> no rollback any longer (see http://saphelp.euroset.lan///EN/41/7af4bfa79e11d1950f0000e82de14a/frameset.htm).
Currently my first guess would be: being on same application server is an exception.
There are quite a number of places, where a implicit commit work occurs (e.g. wait!, PAI). Instead of wondering, why in one exception rollback is still working, remind these cases and build up save booking procedures.
Regards,
Christian

Similar Messages

ITunes crashes when trying to sync photos, I have called Apple suport and I have erased and reloaded itunes, seemed to work better but then crashed again in the middle of sync photos saying ' IPAD cannot be synchronized. The file required cannot be found'

This seems to be a common problem...can anyone help?

Have you tried deleting the photo cache from your computer and then re-trying the photo sync ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

What does the message "Commit can be issued only when there are no requests awaiting responses" mean ?

Can someone explain what this message is, and what the reason could be for
          the java.lang.IllegalStateException.
          When such an error is encountered, how can I find out what the
          "RepliesOwedMe" are. The complete exception is as follows
          Any quick hint is greately appriciated
          Thanks
          asankha
          <Sep 6, 2001 12:49:18 PM GMT+06:00> <Error> <EJB> <Exception during commit
          of transaction transactio
          n=(IdHash=8297169,Name = [EJB
          CActionBeanImpl.execute()],Xid=3:c56b8ee8f6114598,Status=Active,numRep
          liesOwedMe=2,numRepliesOwedOthers=0,seconds since begin=0,seconds
          left=29,ServerResourceInfo[weblogi
          c.jdbc.jts.Connection]=(state=suspended,assigned=none),SCInfo[myserver]=(sta
          te=active),properties=({
          weblogic.transaction.name=[EJB CActionBeanImpl.execute()],
          weblogic.jdbc=t3://10.2.1.133:7001, weblo
          gic.debug.DebugContext=weblogic.utils.DebugContext@662250})):
          java.lang.IllegalStateException: Commi
          t can be issued only when there are no requests awaiting responses.
          Currently there are 2 such reque
          sts. xid = 3:c56b8ee8f6114598, status = Active
          at
          weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(Tra
          nsactionImpl.
          java:1272)
          at
          weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(Transact
          ionImpl.java:
          1206)
          at
          weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransaction
          Impl.java:162
          at
          weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:201)
          at
          com.edocs.wb.web.action.CActionBeanEOImpl.execute(CActionBeanEOImpl.java:37)
          at CeaMarketMainServlet.doGet(CeaMarketMainServlet.java:185)
          at CeaMarketMainServlet.doPost(CeaMarketMainServlet.java:312)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          :213)
          at
          weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
          ntext.java:12
          65)
          at
          weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
          :1631)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >


          This means that the transaction initiator has not received replies for some of
          the transactional requests when the transaction commits, i.e. the checked transaction
          behavior is violated. WLS TM enforces checked transaction behavior to make sure
          that all work done in the transaction context will be completed before transaction
          is committed. If it cannot make such guarantee due to outstanding replies, it
          aborts the commit right away.
          Currently, there is no provisions for dumping the requests whose replies are still
          pending.
          I would suggest you report to BEA support: [email protected]
          Regards,
          Priscilla
          "Asankha C. Perera" <[email protected]> wrote:
          >Can someone explain what this message is, and what the reason could be
          >for
          >the java.lang.IllegalStateException.
          >
          >When such an error is encountered, how can I find out what the
          >"RepliesOwedMe" are. The complete exception is as follows
          >
          >Any quick hint is greately appriciated
          >Thanks
          >asankha
          >
          ><Sep 6, 2001 12:49:18 PM GMT+06:00> <Error> <EJB> <Exception during commit
          >of transaction transactio
          >n=(IdHash=8297169,Name = [EJB
          >CActionBeanImpl.execute()],Xid=3:c56b8ee8f6114598,Status=Active,numRep
          >liesOwedMe=2,numRepliesOwedOthers=0,seconds since begin=0,seconds
          >left=29,ServerResourceInfo[weblogi
          >c.jdbc.jts.Connection]=(state=suspended,assigned=none),SCInfo[myserver]=(sta
          >te=active),properties=({
          >weblogic.transaction.name=[EJB CActionBeanImpl.execute()],
          >weblogic.jdbc=t3://10.2.1.133:7001, weblo
          >gic.debug.DebugContext=weblogic.utils.DebugContext@662250})):
          >java.lang.IllegalStateException: Commi
          >t can be issued only when there are no requests awaiting responses.
          >Currently there are 2 such reque
          >sts. xid = 3:c56b8ee8f6114598, status = Active
          > at
          >weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(Tra
          >nsactionImpl.
          >java:1272)
          > at
          >weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(Transact
          >ionImpl.java:
          >1206)
          > at
          >weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransaction
          >Impl.java:162
          >)
          > at
          >weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:201)
          > at
          >com.edocs.wb.web.action.CActionBeanEOImpl.execute(CActionBeanEOImpl.java:37)
          > at CeaMarketMainServlet.doGet(CeaMarketMainServlet.java:185)
          > at CeaMarketMainServlet.doPost(CeaMarketMainServlet.java:312)
          > at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          > at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          > at
          >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          >:213)
          > at
          >weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
          >ntext.java:12
          >65)
          > at
          >weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
          >:1631)
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >>
          >
          >

Exception while commiting Tx Currently there are 3 such requests

Hi,
I have a service ( ejb session ) exported to etx.
Randomically the client tha invoke this receive the follow exception
i work on weblgoic server 8.1 sp6
can anyone help me?
thnks for help
Error invoking VMOperation in OperationNode 'call_server'. Exception: [J2EECallException]: Error performing the call. Exc=javax.transaction.TransactionRolledbackException: Exception while commiting Tx : BEA1-000AB634D12A5E8994C3: javax.transaction.SystemException: Commit can be issued only when there are no requests awaiting responses. Currently there are 3 such requests at weblogic.transaction.internal.TransactionImpl.abort(TransactionImpl.java:1045) at weblogic.transaction.internal.TransactionImpl.enforceCheckedTransaction(TransactionImpl.java:1625) at weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(TransactionImpl.java:1603) at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:250) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228) at weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:320) at weblogic.ejb20.internal.StatelessEJBObject.postInvoke(StatelessEJBObject.java:168) at ejbControllerBean_rc0vfk_EOImpl.sendRequest(MscControllerBean_rc0vfk_EOImpl.java:56)
at ejb.ControllerBean_rc0vfk_EOImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:491) at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:120) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:434) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147) at weblogic.rmi.inter

Hi,
I have a service ( ejb session ) exported to etx.
Randomically the client tha invoke this receive the follow exception
i work on weblgoic server 8.1 sp6
can anyone help me?
thnks for help
Error invoking VMOperation in OperationNode 'call_server'. Exception: [J2EECallException]: Error performing the call. Exc=javax.transaction.TransactionRolledbackException: Exception while commiting Tx : BEA1-000AB634D12A5E8994C3: javax.transaction.SystemException: Commit can be issued only when there are no requests awaiting responses. Currently there are 3 such requests at weblogic.transaction.internal.TransactionImpl.abort(TransactionImpl.java:1045) at weblogic.transaction.internal.TransactionImpl.enforceCheckedTransaction(TransactionImpl.java:1625) at weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(TransactionImpl.java:1603) at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:250) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228) at weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:320) at weblogic.ejb20.internal.StatelessEJBObject.postInvoke(StatelessEJBObject.java:168) at ejbControllerBean_rc0vfk_EOImpl.sendRequest(MscControllerBean_rc0vfk_EOImpl.java:56)
at ejb.ControllerBean_rc0vfk_EOImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:491) at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:120) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:434) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147) at weblogic.rmi.inter

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

Problem with XML Publisher report when there are no detail records.

I am working on an Oracle XML Publisher procurement report (Oracle E-Business Suite R12) that starts with a budget amount that is imported from our financial system, then lists all requisitions and orders that are in process (not approved). The amounts of all those unapproved requisitions/orders are totaled using a Sum form field, to be followed by a field where the unapproved requisition/order total is subtracted from the budget amount (amount available). I am running into a problem when there are no unapproved requisitions. When I run the report for such instances, it completes with a warning -- here is what it states in the OPP log:
oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
I have altered my sum field on the RTF template to include an if statement in case of a null value...
<?sum (EXTENDED_COST)?> <?xdofx:if sum (EXTENDED_COST) = " then 0 end if?>
...but this does not work.

Hi,
You are on right track. Simply put summary field in header group and remember to set reset at property to Header Group Not Child and now you can use this field in format trigger.
Format trigger must be written on header frame.
Cheers !
Adinath Kamode

IPhone 4s has yahoo mail icon permanently on safari when there are no open pages

My iPhone 4s using iOS7.0.2 has a Yahoo mail icon displaying permanently on the top of Safari when there are no open pages. The icon did not disappear even when I deleted my Yahoo mail account. The icon also has my Yahoo username displayed below it. Is there any way I can remove the Yahoo mail icon from permanently displaying on Safari? I cleared my history, cookies and data, but the Yahoo icon is still there.

I have the same issue and koban4max's sugggestion doesn't work (well, it works, but you'll need to do it once a day.) I am surprised this hasn't been widely reported either as an iphone, Verizon or Yahoo issue. I tried various suggestions (deleting/re-adding account, moving messages to a new folder and changing password on computer/iphone, etc.) It will push for a while but stop pushing in a few hours or a few days. This leads me to believe somewhere in the interface corrupts the process. I would love to know if it's unique to Verizon, iphone 4S or IOS 5, or all of the above. The phone doesn't even fetch according to schedule, only when you are in the application. BTW, the Exchange push solution for Gmail works wonderfully.
iphone 4S, IOS 5, Verizon.

Header Fields are not displayed when there is no data in the report

Hi,
I am having this strange situation in my webi report.
When I refresh my report and when there is no data, column names are not being displayed in my report. All it is showing is two empty rows. When I have data, then report is displaying data along with column headings.
Please suggest me where I am going wrong.
Thanks,
VenMen

Thanks for the update.
Can you try this.
Run the report first time for some data.
When the report is rendered select the table that is displayed.
On the left pane side properties tab.
Expand display and check all the options
Show rows with empty measures
show rows with empty dimensions
Show when empty
Hope this will help
Regards
Kultar

How to improve performance when there are many TextBlocks in ItemsControl items?

Hi,
I'm trying to find a way to improve performance for a situation when there is an ItemsControl using UI and Data virtualization and each item on that control has 36 TextBlocks. Basically the item is a single string. There are so many TextBlocks
to allow assigning different brushes to different parts of the string. Performance of this construction is terrible. I have 37 items visible on the screen and if I try to scroll up or down it scrolls into the black space and then it takes a second or two to
show the items.
I tried different things. For example, the most successful performance-wise was to replace TextBlocks with Borders and then draw bitmaps. In other words, I prepared 127 bitmaps for each character (I need ASCII only) and then I used those bitmaps
to set Border.Backgrounds. It improved performance about 1.5 - 2 times but it consumed much more memory (which is not surprising, of course). Required amount of memory is so big that it throws OutOfMemoryException on 512MB emulator but works on 1GB. As a result
I don't thing it is a good solution.
Another thing that worked perfect is to replace 36 TextBlocks with only 6 TextBlocks. In this case the performance improvement is about 5 - 10 times but I lose the ability to set different colors to different parts of the string. It seems that
the performance degrades dramatically with the increase of number of TextBlocks. Is there another technique to draw strings where literally each character can be of different color with decent performance?
Thank you
Alex

Using Runs inside TextBlocks gives approximately the same improvement as using bitmaps 1.5 - 2 times faster but it is not even close to the case with just a couple of TextBlocks in the ItemsControl item. Any other ideas?
Alex

Keynote and pages are now free, but why do i need to pay for them still when there now free?!?

keynote and pages are now free, but why do i need to pay for them still when there now free?!?

Users can obtain the iWorks and iLife applications free, if they purchased a Mac after the beginning of October 2013.
Older Mac purchases require a paid purchase of these applications.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Joining 2 related records using PL SQL in Apex - Problems when there are more than 2 related records?

Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
     cursor c_mar_principle(b_entry in number, b_book in varchar2)
     is
          select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
          from   MARRIAGES mar
          where mar.entry   = b_entry
          and    mar.book = b_book
          order by principle desc, id asc;
     rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM   := rec.surname;
:P16_FORNAME_GROOM   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE   := rec.surname;
:P16_FORNAME_BRIDE   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;

rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed.

Displaying a message when there are no results from an XSL Query

Using MM_XSLTransform.class.php
I am querying an XML file to produce a list of places whose town name or address match a letter of the alphabet. The letter is passed as a variable in a URL.
XSL:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<xsl:param name="letter"/>
<xsl:output method="html" encoding="UTF-8"/>
<xsl:template match="/">
<xsl:for-each select="dataroot/CPINFOWEB[Town=starts-with(Town, $letter) or Name=starts-with(Name, $letter)]">
      <table width="100%" border="0" cellspacing="0" cellpadding="0">
        <tr>
        <td>
    <a href="detail.php?park={CostCode}"><xsl:value-of select="Name"/></a><br />
          <a href="detail.php?park={CostCode}"><xsl:value-of select="Town"/></a><br />
      <xsl:value-of select="Address"/><br />
      <br />
      </td>
        </tr>
      </table>
      </xsl:for-each>
</xsl:template>
</xsl:stylesheet>
Destination PHP file:
setXML("../regions/CPINFOWEB-mobile.xml"); $mm_xsl->setXSL("list.xsl"); $mm_xsl->addParameter("letter",$_GET['letter']); echo $mm_xsl->Transform(); ?>
The result Name and Town are displayed as a URL to link to a "more details" page.
All works fine, but when there are no results for a letter of the alphabet I obviously get a blank page.
How do I display a "no results" message instead

I deleted my original reply because the formatting of the XSL code was messed up by the forum. Here's trying again:
Your current code creates a new table for each result. The opening and closing <table> tags should be outside the the <for-each> loop. To deal with the possibility of no results being found, use a conditional statement and the count() function like this:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<xsl:param name="letter"/>
<xsl:output method="html" encoding="UTF-8"/>
<xsl:template match="/">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<xsl:for-each select="dataroot/CPINFOWEB[Town=starts-with(Town, $letter) or Name=starts-with(Name, $letter)]">
        <tr>
        <td>
    <a href="detail.php?park={CostCode}"><xsl:value-of select="Name"/></a><br />
          <a href="detail.php?park={CostCode}"><xsl:value-of select="Town"/></a><br />
      <xsl:value-of select="Address"/><br />
      <br />
      </td>
        </tr>
</xsl:for-each>
<xsl:if test="count(dataroot/CPINFOWEB/Town) &lt; 1">
    <tr>
    <td>No records found</td>
    </tr>
    </xsl:if>
</table>
</xsl:template>
</xsl:stylesheet>

I can't back up my iPhone4. When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

I can't back up my iPhone4. When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

Thank you for answering my question. If I reinstall itune, is it mean that I need to install music, apps, video...everything in itune again? also intall everything in my iphone again?

Avoid marking files as modified by Git when there are no changes

Hello,
I am working on a project using Visual Studio 2013 Ultimate and Enterprise Architect 9.0 (a UML tool). I am using Git for Source Control in Visual Studio.
I have set up the programs so that I can synchronize code from Enterprise Architect (EA) to Visual Studio (VS) and vice versa using MDG Link for Visual Studio (an Enterprise Architect add-in). I first synchronized all the existing code from VS to EA.
Now I have the following workflow:
Create UML models in EA;
Add necessary attributes and operations to the class models;
Synchronize models with the code, which will add the added attributes and operations to my source;
The last step will regenerate all my source code files, but even if there are no changes Git marks the files as modified.
How can I avoid this behaviour, because now all my files are modified when Enterprise Architect synchronizes the model with the source code.
I only want Git to mark it as modified when there are actually things added or modified in the file.
Any help will be appreciated.
Marcel

Hi,
I think it's more VS which detect the file was modified, and by default it mark the file as modified in Git.
But normally when you want to commit your work these files are removed because Git detect the files are not really changed.
Did you try to refresh the pending changes in the team explorer (F5). Perhaps Git recalculate all the differences, and then detect the real changes.
Regards,
Yan Grenier
Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.

Are implicit DB commits initiated when there are Sync or Async RFC call

Similar Messages

Maybe you are looking for