Are INDD files saved with trial software good to go...

... with the purchased software I will receive later? I am anxious to get start converting PageMaker files, but do not want to waste time doing so if all my editing is not saved in files that can be used with the purchased software. Thank you.

They'll be fine.

Similar Messages

  • Where are the files saved that someone sends you via Skype Windows8

    Hi, I just bought a new computer that has windows 8 installed on it and I must say that I was chocked when I realised that the system is like running a pad wich is so bad if you are looking to actually work with the computer. Then I installed skype and was astounded that there is nothing that you can do with it. No video call?I use skype to send files and do video calls. Now when someone sends me a file I have no choice of where that file is saved... Where are the files saved? OS: Windows 8 Thank you

    Hi, I can´t see any skype flooder in that location too What shall I do ? Where are my photos ?I am sure I received it , and its not hidden !Thats terrible !!!!I liked skype before, but now ? Why should I use thing like that when I can´t find my pictures! 

  • Are ntfs files compatable with mac os lion

    are ntfs files compatable with mac os lion

    Files aren't ntfs or hfs or ufs or zfs.
    Those are file systems that is the basis for how the OS stores the files on the computer. Files are store inside a file system, but the file system doesn't normally affect the file itself.
    Mac OS X can natively read nt file systems. If you want to write, then you'll need something like Siddharth Khanna pointed out. I've also used Tuxera's product. You can use a combination of MacFuse and NTFS-3G for free, but if you need normal everyday access, that's going to fall short, I think.
    On the other hand, Windows can't natively handle HFS+ at all. If you need to format an external drive to work with both, I'd suggest using exFAT. Mac OS X from 10.6.6 on can read and write it, and Windows back to some version of XP can read/write it. As the name implies, it is much like FAT, but on steroids. It can handle very large file sizes and disk sizes.

  • Are Cloud files compatible with CS files?

    Are Cloud files compatible with CS files?

    That depends on the specific files and the specific programs... some files are backwards compatible, some are not
    You need to ask in the forum for the programs you are using
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Paid subscription but account says I have a CC free membership with trial software!!

    Hello, I purchased the $9.99 per month PS & Lightroom bundle at the start of the year and I my payments are current but my PS tells me my trial has expired and it asks me to license my software! It was working fine until about a month ago when it updated and now I get the message I just spoke described. Lightroom works and updates fine! When I go to manage my account it tells me I'm on a Creative Cloud Free membership and I only have access to trial software. Please help!!

    Hey Jeff, I went to the hosts location and there was no hosts file so I did a search and found the below file.
    # Copyright (c) 1993-2009 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com          # source server
    # 38.25.63.10     x.acme.com              # x client host
    # localhost name resolution is handled within DNS itself.
    #             127.0.0.1       localhost
    #             ::1             localhost
    I have noticed that I receive my payment receipts through my work email but I believe I'm logged into CC app via my hotmail account. Could this be the problem? I have some pics attached showing what my CC is showing.
    Sorry to be a pain but I'm getting busier with work and this is a major problem which I needed sorted ASAP please!! Hope you can help.
    Regards,
    Kurt

  • Cannot open CC, indd files saved in an earlier versions in CS6

    When attempting to open CC files inside of version CS6 that have been saved by students in version CS4 and later, I get the following message" Cannot open "fileName.indd" because it was saved with a newer version of Adobe  InDesign (CS7.0) You must use tht version or later to open the file... How can I open these files? I also get plugin messages.

    That's weird. But I guess they didn't properly Exported the file into an .idml file. Save As is different from File -> Export to idml
    If your student did just File -> Save As, thinking that Save As works just like MS Word that saving it will work with backward compatibility to a lower version of InDesign then probably it won't work.
    However, just ask them to Re-Export the file to .idml and see if you can open it in your InDesign CS6.

  • When are renderd files saved ?

    pe 11
    I want to know when PE saves the rendered files (I mean rendering for editing, not the final rendering for export) and when the program doesn't save the rendered files.
    You should expect that PE saves also the rendered files at the moment you save (or/and autosave) but in my project I estimate only 2/10 of the timeline is green after loading the project again. So most rendered preview files are NOT saved in my case ...
    So I have to start rendering everytime and this takes than longer and longer before I can start work ...

    fredowww66
    Again, the preview files generated when you direct the program to give you the best possible preview are not deleted or damaged in their hard drive save location when you save/close a project with the "rendered look" and then reopen it to find the "unrendered look". There appears to be a disconnect between the project and those "rendered files", be those rendered files DV AVI from a SD project or MPEG2.mpeg from a HD project....either that or there is a problem with the indicator line itself programming.
    Reports of this issue peaked around Premiere Elements 7 and have presented less frequently from then until now. But, it does happen even today with Premiere Elements 11 and 12 without a real explanation for how, when, or where.The problem has never been confined just to the use of .psd files in Premiere Elements. Today, I revisited the issue specifically for Premiere Elements 11 on Windows 7 64 bit some .psd files versus their .jpg counterparts.
    a. When I took 4 .psd files into a project, rendered - orange indicator line to green, saved closed the project and then reopened it, the 4 .psd files presented with orange line over their contents. At the same time, the preview files generated automatically by the rendering process were still alive and well in their hard drive save location.
    b. When I took the same 4 .psd files and converted them to .jpg files, and repeated "a", the 4 .jpg files presented with a green line over their contents immediately before save close and immediately after reopening. But, based on the history of this problem, we cannot be sure that will be the case all the time for all the versions with the different computer operating systems.
    Yes, in this situation, if you want to render the Timeline content for the reopened project, the program will let us and will generate another batch of preview files to add to the existing ones which appear to be disconnected from the reopened project.
    Considerations
    1. Ignore and proceed knowing that you saw the best possible preview before the save close of the project. But, if you edit that re-rendered content, you will get the orange render indicator line anyway and will have to render to get the best possible preview of what you just edited.
    2. If you do not want to render the whole Timeline with its orange line over it, you can render selectively by setting the gray tabs of the Work Area Bar to span just the content to be rendered.
    3. You can render the whole Timeline in the re-opened project.
    Some just in case notations...Rendering is not going to improve the quality of the end product. It is just an opportunity to catch a problem sooner than later. It is particularly indicated for titles, transitions, effects, and non native formats.
    My take on the situation is that you will need to find a way to adjust your workflow according to what is. Based on history and this issue, there is no evidence to suggest otherwise.
    By the way, if you are preparing your images in Photoshop, do not apply the CMYK color model. Premiere Elements (any version) does not support it.
    ATR

  • Captivate File Created with Trial Will Not Open in Paid for Captivate

    I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view   because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

    Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

  • File created with Trial version cannot be opened by Captivate 5.5 (Ensure that the file isn't open, the file isn't damaged....etc.)

    Hi,
    I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view   because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

    Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

  • Reader can't open file saved with "Extended Features"

    Any help would be appreciated.
    File created with Acrobat Pro 9.
    File opens fine under Windows and Linux, but can't be saved.
    Enable "Extended Features in Adobe Reader" in Acrobat Pro 9.
    File can be saved under Windows, but gives an error in Linux.
    "This document enabled extended features in Adobe Reader.  The document has been changed since it was created and use of extended features is no longer available.  Please contact the author for the original version of the document."
    The file opens, but is unusable.  Nothing can be entered into any of the fields.
    Thanks,
         -matt

    I had the same problem earlier this week -- I created a PDF with Acrobat 9, enabled for commenting, sent out to coworkers, who then reported the "use of extended features is no longer available" message. After many, many troubleshooting permutations, I finally found the problem to be related to the timestamp on the file.
    I am on the US east coast, and the document was sent to coworkers on the US west coast, 3 hours earlier. When they opened the document, it appeared to be "from the future" (lol) and therefore suspect. This was born out by the fact that the next day, the file behaved as expected for them. I also verified this on a test system, where I was able to switch the time setting. By the way, this happened with both Reader 8 and 9.
    So, I guess the workaround is either to change your computer's time before sending a file with rights extensions to someone in an earlier time zone, or create it and hold it until they have caught up with the time in the file's timestamp.
    That has to be about the weirdest bug I have encountered to date...and I have no idea why it showed up this week. I have been sending out PDFs enabled for commenting for a couple years.
    HTH

  • Associate .indd file extension with CS6

    I have not been able to associate the file extension with CS6 in Windows Vista. The .indd extension is already taken by another application, yet when I try to change it, it does not save.

    While highly unlikely as the reason, Vista was not tested and is not supported for CS6.
    What “other application” has the INDD association? Is it a different version of InDesign? Did you install the other version AFTER CS6?
    Bob

  • Are .dng files compatible with iPhoto?

    I recently purchased a Panasonic Lumix dmg G2 camera. I have iPhoto '09 on my iMac, running OS 10.6.8. I was unable to load the RAW images from this camera to iPhoto, so I converted them to .dng files. I even downloaded the latest version of the dng Converter, but I am still unable to download them to iPhoto. I get the following error message:
    "Unreadable Files: 1
    The following file could not be imported. (The file is in an unrecognized format.)"
    I am pretty sure I was able to download .dng files in the past. Has something changed, or are .dng files just not compatible with iPhoto?
    JB

    Not all dng-files are alike. I have used dng with iPhoto before, without problems. I could not find any documentation for dng in iPhoto, but for Aperture it is documented that dng works for  "DNG files generated by the Adobe DNG Converter with the 'Convert to Linear Image' option turned off". Probably the same will hold for iPhoto.
    In Snowleopard the following cameras are supported:
    Mac OS X v10.6: Supported digital camera RAW formats

  • Why are my InDesign 6 files saving with Acrobat extensions

    This has just recently started happening. Suggestions?

    In terms of Adobe, an "extension" is something like a plugin or a script.  Something you can manage in the Extension Manager. Are you sure you mean that?
    And it most certainly did not happen without you taking any previous action to cause it, an action like system updates, software updates or wildly changing preferences.
    Suggestions? One: restore your OS to a date prior to the first problem appearance and then leave it untouched.

  • Cannot find .TIF file saved with Acrobat 9 Pro

    I have a Canon document scanner that I use with Acrobat 9 Pro on Windows 7. I can scan the document into Acrobat, and save it as a PDF just fine. However, if I try to save it as a .TIF or a .TIFF, it appears to save just fine, but I'm unable to locate it afterwards. Here's what I've done so far:
    - Checked to make sure hidden files are visible in Windows Explorer
    - Made sure the permissions for the folder allowed writing files (even saved the TIF files to the same folder as the PDF files)
    - Searched for the filename with Windows Search. It finds the file, but when I try to click on it to open the file, Windows says that the file cannot be found.
    We're needing this for importing documents into a LIMS program, and we can't get that working until this part gets resolved. Anything that you can think of to help would be great. Thank you!

    Solved: It appears to be a Microsoft Word issue as it doesn't occur with other apps. When using the built-in 'convert to PDF' tool within Word the file name length is respected. It's an older version of Word (Word 2002 SP3). I printed a file using the same name length with Wordperfect and it works fine.
    I know this isn't a Word help forum, but if anyone does have a solution to offer it would be appreciated :-)
    Russell

  • Thumbnails in Bridge lost in files saved with AE CS6

    On Windows I have some templates (aet) from AE 7 and CS3 that include thumbnails in the XMP, and Bridge CS6 shows these.  If I open these templates in AE CS6 and save them out, no thumbnail is preserved/added to the XMP.
    I looked through the preferences for AE CS6 and I can't find anything related to saving out previews/thumbnails in the XMP for a project or template. 
    Is there a setting that will allow me to get thumbnails in the XMP that I would see in Bridge?  Was this a capability that was dropped some time between CS3 and CS6?
    David Blake

    I can contact my customer and see if he wants to contact you about his templates that have thumbnails.
    The files I am testing with are from Adobe Exchange.  The metadata in the file doesn't indicate who they are from or who created them.  The thumbs are in the screenshot below.

Maybe you are looking for