Are inkjet printer or laser printer economical?

I was wondering which kind of printer is less expensive to use?

This is a difficult question to answer, and depends on several factors such as:
What is your expected printing volume per month?
What will you print - black text, mixed text and graphics, photo's?
In general, for printing black only laser printers are more economical.  Like inkjet printers, laser printers have a wide range of cartridge sizes and costs per page.  For both inkjet and laser printers the lower cost printers typically have lower capacity cartridges and higher costs per page compared to the higher end models.  Some higher end inkjet models such as the Business Inkjet Pro models have lower cost per page than the low end lasers. Higher end inkjet models tend to be more efficient when printing larger runs, less efficient when printing a page here and a page there. 
There are few resources that may help: HP's pageyield site lists the page yield per cartridge of recent printer models.  Note that many inkjet models have standard and "XL" cartridges.  The latter have generally better cost per page, they may give 3x the pages at 2x the price.  Some laser models have similar offerings.   There is also a guided site here that will ask various questions about your printing needs and then suggest suitable HP  printer models.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Different btn dotmatrix print and laser print

    hello sap experts
    how can i print my pld report in dotmatrix print and what is the difference btn dotmatrix print anda laser print
    thanks in advance
    regards
    Jenny

    Hi,
    Incase of dot matrix printers only limited printers are supported by sap b1 like Epson - FX890,Citizen ProDot 30,Epson FX880.
    Refer note:724904 for instructions printing in sap b1using dot matrix printers.
    More over you have to set the alignment(as often it gets changed).
    And as most of the dot matrix use continuous printing sheets,it would be a tedious job to make the PLD alignment.
    Whereas in case of laser printer you can easily do the alignment as it would in A4 size.
    I suggest you to go for laser printer if it is affordable by client.

  • IMac G5 no longer prints to laser printer over ethernet network

    I have a small office with 6 iMacs networked via ethernet with a Netgear Router. Printers are connected to one machine and people send to print over the network.
    3 iMacs are G5. 3 are Intel. All run OS X 10.5.8.
    A month ago one of the G5 iMacs stopped being able to print to a Brother laser printer (which is connected by USB to an Intel iMac). I believe this happened after we downloaded a periodic Apple update. About 2 weeks ago a second G5 iMac developed the same problem. The 1st G5 iMac still prints fine to an inkjet printer connected directly to it by USB.
    We have tried re-loading drivers, but no improvement.
    Any suggestions as to how we can resolve this?

    Hi DaddyPaycheck
    The iMacs that can't print can see the printer. We have deleted and re-installed via the printer system prefs too. There weird thing is that you can select the printer and send to print, but for some reason the printer then automatically pauses and you can't resume it. The file is listed by the status is 'stopped'. When you open the printer queue on the Intel iMac that the laser printer is connected to, no print file shows up at all...
    We also ran the network diagnostic that you can do when in printer system prefs and that reported that "the G5 iMac could connect to the internet, but not the Server "brother HL 4040CN series-1@ben's-iMac-2.ipp.tcp.local" "
    Hope there's a clue in there somewhere...
    R

  • Issue in Cheque Printing using Laser Printer

    Hi,
        There is a requirement wherein cheque needs to be printed from F-58 using Laser Printer.I have created the custom page format for Cheque printing .Attached it to the custom device type that i have created(Copy of Device type HPLJIIID).Aslo i have attached the page format to the tray1 of the 'Tray Info' tab of Output devices in SPAD.
    I am getting the print information correctly on the cheque but what happens is that the Printer gives an error message saying'Jam in Fuser Area' and the cheque has to be taken out of the rear door of the printer,it doesn't come out automatically.As a result for
    printing the next cheque, printer has to be restarted.
    Require your help on this.
    Regards
    Vinod

    Hi All,
             Forgot to mention one thing.I am making use of script ZF110_PRENUM_CHC (copy of standard script F110_PRENUM_CHCK)
      for cheque printing.

  • Printing to laser printer looks terrible

    Ever since PS CS3 I've noticed that when I print a 300 dpi grayscale image to my laser printer directly from Photoshop, it comes out as if a 72dpi benday screen had been applied. Never happened in earlier versions. I used to get excellent black-and-white print quality through Photoshop, just using the default settings.
    I have 300 or 600 dpi grayscale images, usually with a lot of clean black lines. But whether I set to "printer manages colors" or "Photoshop manages colors", and no matter what profile I select, I get the same halftone (awful) result on my HP Deskjet 3330. The printer's settings are fine. If I print the same image from any other application, such as Quark or MS Word, the print quality is fine.
    PS has always been a bit confusing to me regarding printing settings. Can someone tell me a way to get my 300-600 dpi images to print properly, without halftones applied?

    Of course the first thing I did was check my printer settings. This is what baffles me. I have only one printer setting which I set up as default for all programs, including Photoshop. In CS2 and earlier versions, anything printed from Photoshop came out exactly like prints from any other app: 600dpi fine quality. But now (since CS3) ONLY Photoshop printouts come out in this 72 dpi halftone. Using the same default printer driver settings when printing from Flash, Word, Corel, Quark, IE, Firefox, I get fine quality printouts.
    This is why I am asking for advice! Obviously there is a setting within Photoshop that I am doing wrong. Probably something obvious.
    Please treat me like I'm stupid. How do you 'check halftone settings in Photoshop'? is that dot gain? I have print settings for 'grey dot gain 20%', which is what I've seen it set at since I started using Photoshop 3.

  • Dot Matrix Print to Laser Print

    Hi
    ZQM_INSP_RESULT  this Program Gives Out Put in Dot MAtrix Print Format.
    but I want it the Report in Laser Print Out....
    How to Do This?
    I gone through the program bt im not Understanding aything...
    Can Anybody help me on this?

    hi,
    cn you please check this link
    it would helpful to you
    Print out issue in PO
    Thanks and regards
    Durga.K

  • Print with laser printer

    Hi everyone,
    I'm developing an application that should print its JTexPane with 'Arial Unicode' font. I use a styled document. When I print with a deskjet, there isno problem ,my text is perfectly rendered.
    But, when I print with the laser printer, the text is always in bold. This printer doesn't accept 'Arial Unicode' in its properties. I have to be able to print unicode font (chinese, ...) and the printer doesn't have any unicode font in its settings...
    Is there anything I can do ?
    Thank you.
    Pascal

    I am also experiencing similar problems. I am trying to print a JEditorPane rendered HTML-document. On screen it looks good, but when sending it to either a PDFCreator or printer, bold and italic text looks really wierd. Does anyone have a solution to this problem?
    I can post some code or the PDF file if someone wants to see it.
    Thanks in advance.
    Magnus

  • Print to laser printer without having overprint.

    I have a document with an overprinting element and want to print to a laser printer but the top overprinting element is showing everything underneath. How can I print this and have it show up as seen on screen without the overprint showing?

    To farther complicate things, I print "as Image" on my mac using Acrobat 8 and the document prints as on screen without showing the overprints. When I go to a Windows machine using the current version of Acrobat Reader and print "as Image" the overprinting shows up on the laser.

  • Inkjet printer or laser printer--which is the more desirable?

    Sorry ... there is no other category to ask this....but if price is not the issue... what printer would be the best choice for an iMac? ..... and what namebrand and model would u recommend? .... and how reliable is a printer that is not hardwired to the computer (but rather info sent wirelessly to the printer)?
    (... i forget the differences between laser and inkjet....)
    ...PS the printer will be used for basic color printing and ideally also for photo prints as well....

    Sorry ... there is no other category to ask this..
    Sure there is but regardless, the Camera and Photos discussions for the iPhone is not anywhere close.
    Under Mac OS X v10.4 Tiger:
    http://discussions.apple.com/category.jspa?categoryID=160
    And below that is a category named Printing & Faxing.
    http://discussions.apple.com/forum.jspa?forumID=756

  • Barcode printing in Laser printer

    Hi ,
    I am trying to print barcode on HP 5100 laser printers.On R&D I found there are two solutionn to print barcodes
    1. Use Barcode.dll ( only with help from SAPLPD )
    2. Use Bardimm ( Jet caps ) from HP
    Is there any other solution to acheive barcode printing .i.e without using any additonal softwares/hardwares.?
    Advance thanks for a reply ASAP.
    Ugesh

    Hi,
    To be honest, I faced this problem some time ago and I couldn't find a solution which didn't include additional software being installed (and a licence fees apply).
    I didn't even try writing my own program to act in a similar way (so we could save some money on license fees) as it would cost more than the licence anyway. If you include costs of testing and maintenance then it works out that the solutions available on the market are not as expensive.
    The one we use works well but only works for printers which support PCL (most of them do nowadays) and requires additional software and some fees.
    This solution is provided by e-bizco.com GmbH.
    Basically your barcode is transformed by the program sitting on your server (as a service). It is transformed into PCL format and printer processes it. It works on various OS including Windows and AIX.
    Thanks,
    Wojtek

  • Looking for a Laser Printer which takes Paper Roll instead of seperate(A​4 size) papers

    we are looking for a Laser Printer which takes Paper Roll instead of seperate(A4 size) papers   

    I don't know of any laser printers that take a roll instead of sheets.  There are some small designjets that might have a roll feed accessory but they are inkjet printers and designed for graphics applications.
    insert signature here

  • Escape codes for laser printer Kyocera FS-3920dn in reports 6i

    Hi,
    I use many reports for printing on laser printer Kyocera FS-3920DN. But now I need print some reports on special performed paper. For this we added 1 paper tray to printer ( Now we have 2 trays in printer ). How can I define for new reports which tray have to use ??? I wish to specified for report2.rep to use automaticly tray 2. Its a way through PRT file use escape codes ?? Have you any experience pls??

    In the report itself you can use:
    SRW.SET_PRINTER_TRAY('tray');
    see the online help.
    We do it differently, though. Our printers have 2 trays, one with blank paper and one with pre-printed logo paper.
    On each PC there are two printers defined (PRINTER_BLANk and PRINTER_LOGO). They point to the same printer, just a different tray.

  • What damage would result from using inkjet paper in a laser printer

    The subject says it all really. If one accidentally uses inkjet photo glossy paper in a colour laserjet, would it damage the printer?
    If it would how badly would it damage it? What replacement parts would be necessary.
    Conversely if laser glossy paper e.g. HP Professional Photo Paper 200 is used in an inkjet, will it damage the inkjet printer?
    Thanks in advance,
    Steve
    This question was solved.
    View Solution.

    Using glossy coated inkjet paper in a laserjet could certainly damage the laser printer because the inkjet coated paper is not designed to handle the high temperatures of laser printing, particularly the fuser roller.  In a bad (maybe worst?) case the coating would delaminate on the roller, damaging the roller and requiring service.  
    Using photo paper designed for laser printing in an inkjet printer should not cause any damage, but the results are likely to be poor, wasting the print.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hard cover books are only laser prints ?

    I recently ordered a large hardcover book from Aperture, and it just arrived.
    I have been reading good and bad reports about Apple books, and also the Aperture 2.1.2 update promissed better quality books, so something must have been wrong that needed improving.
    The best way to judge the quality was to just try one.
    Maybe my judgement of good and bad is off, but this book I have here is nothing I would expect from Apple, and definatly not something I want to sell to my clients.
    All the pages look like they have been printed with a standard laser printer on cheap paper.
    Color seems ok though, but the overall quality is pretty low.
    Figuring material costs and labour, the price can maybe justified, but I simply did not expect a laser printed book.
    Are all Apple books printed on laser printers ?

    I have noticed a definite improvement in hardcover books post the 2.1.2 update. While I wouldn't sell the books to clients, I do think printing rivals nearly anything on the market right now (in press printed custom books). We use them as a portfolio to give to people in our industry and the quality is definitely good enough for that. They are at least as good as any photo book you'd find at Borders.
    -Dave

  • Is there an HP 3500 Laser printer repair shop in the Denver area?

    This question was solved.
    View Solution.

    Hi,
    If you go to the following link:
    http://h20465.www2.hp.com/GPL/search.aspx?language_code=en&country_code=us&SearchType=SSP
    Just use your information of 3500 Laser printer & Denver & the search engine should give you the results you need.
    Hopefully this helps.
    ---- If my answer was helpful please click the Kudos star.
    If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
    (I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Maybe you are looking for

  • Reading data from DLL in ABAP ?

    Hi PPl, Is it possible to read data in ABAP from DLL , if yes how?? thanks , sachin

  • XI: Alerts - Step by step issue

    I am going through Michal Krawczyk's blog XI: Alerts - Step by step Michal Krawczyk and between step 4 and step 5 I run up against an issue.  I cannot save it because I get a popup saying "Prompt for customizing request" then I click the list button

  • Show inside dynamic text the title for multiple images on mouseover

    I have 25 animated movieclips dragged on the stage and they have similar instance names for easier manipulation purposes inside programming using loops. The instance names look like this: image0, image1, image2 and so on. Each time I go mouseover on

  • 9.0.2 OID Integration Questions

    Hi, I have 9.0.2 running with 9iAS V2 fine. I need to understand exactly how IFS integrates with OID, Specifically : 1) If I create an account in OID - how do I "enable" this as a valid login on IFS? 2) If I create an account in OID - how can I set t

  • New mac pro can't set-up

    just received my new mac pro and can't get it to work. on set-up after a few seconds i get a message need to restart and this goes on and on. what can be the problem. please help.paid big bucks. Thanks, mtools