Are LGS528 ports attached to ground or will I have to do different to obtain proper shielding ?

Hi
Im planning on installing CAT.7 cables at home. They need proper grounding and I was hoping that I will not need to buy a patch panel and connect cables directly from the switch to outlets.
The switch will be connected to ground via power outlet.
Will that be sufficient or will I have to do different? Another way of asking would be if the switch can act as a "ground hub" for all network installation cables?
thank you for your help.
Kind regards
Asger

If you have upgraded iPhoto in that time (you do not say) then you may have problems or may not -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Similar Messages

An Entire cup of coffee was spilled on the side of my MacBook Pro, it was in my purse, port side up. They were filled. I'm assuming the board or whatever is fried. If I go to apple tomorrow, what are the odds that my hard drive will be salvageable?

I'm usually good at backing up my photos and documents, but the last 2 months of pictures and videos are on there and not backed up anywhere. I'm heartbroken.

"What are the odds that my hard drive will be salvageable?"
Very very good, it's all sealed and only a large electrical surge or dropping it while running could do some damage.
Take it and use a SATA to USB adapter you can get online for $12-$40 and hook it right up to the new Mac and use Setup Assistant or Migration Assistant to transfer files.
OR you can access the drive directly and on a PC with MacDrive installed.
However the Mac itself is likley a goner.

How do I send my pages attachment so that it will open for those with Microsoft word?

How do I send my pages attachment so that it will open for those with Microsoft Word?

Hi Victoria,
Pages does not run on Windows.
Word cannot open a Pages file.
If you want someone without pages to be able to open your attachment, you will have to send it in a format openable on the recipient's computer.
If the recipient needs only to read the document, the most universal format is pdf. To send a pdf copy of your file, press command-P to open the Print dialogue, then click the PDF button and choose email PDF. This will open a new message in your default email client and attach the pdf file to that message.
If the recipient needs to be able to edit/change your document, and has MS Word, then either Save a copy as a Word file or go File > Export and choose Word as the file format for the export.
Be aware that MS Word does not support all features of Pages (and vice versa), and that formatting of the document may be affected by font substitution if you use fonts that are not available on the recipient's machine.
Regards,
Barry

SF300 LAG port doesn't work, LACP will not enable.

I'm trying to configure something that seems pretty trivial.
I need 2-3 ports to participate in a LAG port. First off, I get the "Port X belongs to a vlan" if the participating port is something other than access vlan 1. This is totally useless. I need these ports to be dot1Q tunnels. This happens even If i set the default vlan to 300, (300 is my native or PVID). Another piece that doesn't seem to work is that LACP will not enable, even if I throw in the towel and make my ports access vlan 1. What gives? I've tried this on the only firmware available which has no patches avail yet. I've tried this on 2x 24ports, and on 2x 48 ports.. all the same issue.

Hi I just gave it a try you can see my screen captures below.
If you are having trouble, have a word to the good folk at the SBSC if the switch is still under phone support coverage.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Maybe play it safe and delete your settings and start again... Here are some screen shots from my attempt.
I have to admit I enabled LAG and LACP before I created vlan 100.
you can see i have the same software as you.
add the ports and enable LACP at the same time.
ports 47 and 48 are still excluded from my Tagged Vlan
Now I selected port drop down for VLAN100 and selected LAG.
I then received and then modified the following screen capture.
Note I manually added LAG interface 1 as a tagged member of VLAN 100.
Why Lag interface 1, because I created LAG 1 previously, as seen in a previous screen shot above.
regards Dave

HT5557 I have bookmarks and notes that are no longer attached to the original page and I can't find a way to delete them. Could someone help me purge these things so they are not in the way?

I have bookmarks and notes that are no longer attached to the original page and I can't find a way to delete them. Could someone help me purge these things so they are not in the way?

James Ward4 Thanks for your suggestion. I have tried the video app and it appears to have some, but not all of the downloads which are viewable without wifi, so I will now review the download process and see if I can capture the missing episodes. Thanks again.

SP 2013 Upgrade error - web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode.

Hi there,
I get this error when I perform a DB Attach upgrade from SharePoint 2010 to SharePoint 2013.
"web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode."
Any help is appreciated. Thanks.

There is other way of fixing this issue apart from what Amit mentioned. Create a classic based web application in SP 2013 using PowerShell.
New-SPWebApplication -Name "TestApplication" -ApplicationPool "TestApplicationAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "sppoc\spfarm") -Port 100 -URL "http://sp2013demo"
Now mount the content database from SP 2010 on to the web application created above
Mount-SPContentDatabase WSS_Content_100 -DatabaseServer SQL2012Demo -WebApplication http://sp2013demo:100
Once the mount is complete, convert the web application to use claims and migrate the user to use claims identity.
Convert-SPWebApplication -Identity "http://sp2013demo:100" -To Claims –RetainPermissions -Force
$w = Get-SPWebApplication "http://sp2013demo:100"
$w.MigrateUsers($True)
See my blog post about it: http://www.sharepointnadeem.com/2014/01/upgrade-from-sharepoint-2010-classic.html
Please remember to up-vote or mark the reply as answer if you find it helpful.

Why will my iPad 2 not recognize any iPod cables? I have tried two different cables in both the wall and in my laptop, but it will not register that it is receiving power, nor will the laptop recognize that they are connected.

Why will my iPad 2 not recognize any iPod cables? I have tried two different cables in both the wall and in my laptop, but it will not register that it is receiving power, nor will the laptop recognize that they are connected.

Crizzo is right, the best way to charge is with the included power block. That said, the USB cords are interchangable as far as an of us know. (just not power bricks, iPhone and iPod bricks put out 5W of power, the iPad wants 10W and will always say 'not charging' if plugged into less power than it requires even though it will charge, just very slowly)
If you have tried to charge your iPad - with the iPad charger - with multiple cables and multiple computers and get no joy then it's time to head to the apple store and have them check it out. The 30 pin USB port can go bad - mine did - and it's a manufacturer's defect (unless there's any sort of obvious damage) and should be covered under the warranty;

HT204406 Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for

Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible. I have a Match subscription and Match is working. If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them. I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
Thanks

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What are the ports need to open at firewall

What are the ports need to open at firewall to access Oracle EBS R12 through internet?

All these following ports need to open at firewall??
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521

HT1202 I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?

I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?
Any advice welcome.

To clear to old before passing it on, open the Settings app and tap on General (left hand menu). Scroll down and tap on settings, then tap on Erase All Content and Settings.
If you have been synching the iPad to iTunes on a computer, you should also have backed it up. If you havn't backed it, you will want to do so before clearing the settings and use the back up to set up your new iPad.
You may dinf soem of the articles here useful:
http://www.apple.com/support/ipad/syncing/

I lost my belongings via theft. As a photographer my greatest loss is having a computer to download and edit photos. Money is scarce and I am considering an ipad. Can anyone advise me whether an ipad can replace a pc? Are there ports?

I lost my belongings via theft from a storage unit. As it was scheduled for move the next day I did not purchase insurance. Probably an inside job, painful leason learned. This also left me no way to repurchase all i lost.
As a photographer my greatest loss is having a computer to download and edit photos. Money is scarce and I am considering an ipad, understanding even this may not be affordable. Can anyone advise me whether an ipad can replace a pc? Are there ports? How crucial is memory? I could edit photos then store them on flash drives if the ipad cannot handle load. Never having owned one I'm afraid I am completely ignorant on these issues and am grateful for any guidance. Thank you!

Trishfromaz wrote:
Can anyone advise me whether an ipad can replace a pc?
No. The iPad while a powerful tablet, is not a PC replacement. It is limited in what it can do.
Trishfromaz wrote:
Are there ports?
No USB ports or of any other kind if that is what you are asking. There's the sync/charge port you can use with the Lightning to USB camera Adapter, but only to load photos onto the iPad. It cannot write out to USB drives.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
Trishfromaz wrote:
How crucial is memory?
iPads are not upgradeable. So what you buy is what you get. Memory is 1GB. Storage space can go from 16GB up to 128GB
Depending on what Image editor applications you use, there may not be a version for iPad with the features you need.

Embedded images are coming as attachment

Hi,
While creating mime message we are setting the headers such as content-disposition as inline but still
the images are coming as attachment.

More information, please.
What's the overall structure of your message and
how do you want it to be displayed?
You've read the JavaMail FAQ, right?

When Using iOs 7.1.2 OSX 10.9.4 notes are not syncing via USB. When will this be fixed. Not interested in iCloud or IMAP solution.

When Using iOs 7.1.2 with mac OSX 10.9.4 mavericks notes are not syncing via USB.
When will this be fixed ? Not interested in iCloud or IMAP solution. it worked before, I can't really
understand why apple would change one of my favorite features. I use the notes feature to
capture quick ideas on the road and having it synched on my computer and my phone was very useful.
Previous blog posts elsewhere indicated this would be fixed in the latest rev of iOS, OSX and iTunes.
But alas after the recent update it's not. Really Annoying.

poweruser_art wrote:
When Using iOs 7.1.2 with mac OSX 10.9.4 mavericks notes are not syncing via USB.
When will this be fixed ? Not interested in iCloud or IMAP solution.
Then you won't be syncing your notes anymore.
Contacts and Calendars are the only things they restored.
iOS: How to transfer or sync content to your computehttp://support.apple.com/kb/HT1296

My device are stolen and i want to remove my data in my device .i don't turn on find my i phone .will i have to do ?

my device are stolen and i want to remove my data in my device .i don't turn on find my i phone .will i have to do ?
my data are important with me and i am very worried with this trouble

Hi ..
Follow the instructions here > What to do if your iOS device is lost or stolen

Are LGS528 ports attached to ground or will I have to do different to obtain proper shielding ?

Similar Messages

Maybe you are looking for