Are making, editing, and sharing slideshows any easier with 11?

Are making, editing, and sharing slideshows any easier with 11?
I have 09 and a lot of people seem to prefer it to 11.
In 09 I gave up on trying to figure out making slideshows that fit the timing of a song and could then be sent to youtube.
I know it could be done but it wasn't easy like sending movies to youtube from imovie 09.

It's little changed. If you're timing cutting slideshows against a track in a precise way it will always require a timeline, so you will always be better off with a video editor.
Regards
TD

Similar Messages

  • Part 2: Flat files and Business Contents: Any issues with this scenario?

    I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
    1.
    " ...you’d better analyze those cubes for data redundancy and presence of data you’ll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
    2.
    "If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
    3.
    I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
    If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
    4.
    "Consider carefully the ODS’ key fields selection. Their combination should not allow data aggregation that you don’t need."
    I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
    Thanks in advance

    Hallo
    I try to give some exaplanation based on the previous answer.
    1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
    2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
    Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
    3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
    4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
    for example: customer - product - Distr Chan - Sell Price
    if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
    I hope eveyrhting is clear
    Regards
    Mike

  • We have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions

    we have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions?

    Back up all data.
    In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

    My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

    Start here
    http://support.apple.com/kb/HT1430

  • Hi there, I just bought an iMac 2011.  Just a quick question.  Are those keyboard and mouse batteries that comes with the package are rechargeable?

    Hi there, I just bought an iMac 2011.  Just a quick question.  Are those keyboard and mouse batteries that comes with the package are rechargeable?  Thanks!

    Mine was bought last year and they were not; it they don't say "rechargeable". they're not. I started to use rechargeable as soon as the original batteries died.

  • Editing and sharing custom metadata/keywords through Adobe Drive in Adobe Bridge

    I am part of a four-person video production unit operating within a local governmental entity. We are currently using four licenses of Adobe Master Collection CS5, and are about to get access to dedicated SAN storage.
    We would like each user to have the ability to assign specific keywords to any given video clip (or remove keywords from clips) within Adobe Bridge, and have the three other users see the same results. I've noticed that Bridge alone will allow for keywords to be added or removed, but this list is specific to each user. Importing one list into other users' profiles is a start, but would no longer work, once keywords are added or taken away.
    The overview page for Adobe Drive 3 says that it, "allows users to edit and view custom metadata/properties through Adobe Drive in Adobe Bridge," but I haven't found any explanation in either the website, forums, or user's guides that delves any farther into this area. If we incorporate Adobe Drive/Bridge into our workflow, will we be able to share/sync keywords between users? Is there some other (affordable) solution that would let us do this?
    Thanks for any insight you might be able to offer.
    Chuck

    Hi,
    Thanks for sharing your case.
    The keywords you mentioned is XMP metadata, if all your digital assets are managed by ADEP CQ DAM service, you can use AD3 with built-in ADEP connector to communicate with the DAM server, then, I think it can meet your requirement, it means, the keywords can be set by one user through metadata panel in Bridge, and can be viewed by other users.
    for custom properites, it's different from XMP metadata, it refers to the properties of one asset which is managed by a Content Management service. users have to use another UI to edit/view them in Br after AD3 is installed.
    here are some requirements to use it.
    1) CMIS 1.0 compiliant server should be used to manage all your digital assets
    2) use the built-in CMIS with AD3 to connect to the server.
    if other kind of servers are used, you should develope a custom connector through AD SDK to enable custom properties feature as well as some other handler required by AD SDK
    thanks 

  • Can't print to shared printer any more with Tiger

    Hello,
    I upgraded to Tiger from Panther on a powerbook 12". My printers (hp 1700cp and hp 920c) are linked to my G5 dual 2ghz by USB, and shared in the sharing panel. I network the two together by ethernet (via a Farallon Netline broadband gateway router/hub).
    Since moving to Tiger on the powerbook, when I press the "print" button in the print dialog for any program, notheing happens. Same when I press the "pdf" button in the same dialog.
    If I link the printers directly to the powerbook using a USB cable, it prints fine.
    I upgraded to Tiger using the archive and upgrade option. I'd like to do a straight re-load of Tiger from the disks, but as I have since upgraded to 10,4,3 via software update I don't have that option any more.
    Can anyone help ?
    Thanks.

    Hi, I'm having a similar problem.
    I print to an ancient networked LaserJet at work using LAN. I am not able to do it wirelessly. This arrangement has been working flawlessly. Over the weekend, I did an Archive and (re)Install of Tiger in an attempt to resolve a trackpad issue. Since then, my PowerBook has forgotten all of my printers, which is not a big deal, but the PB only sees the LJ intermittently. For example, Tuesday and Wednesday it worked fine, except each day I had to re-add the printer when I started up in the morning. Thursday, I was unable to see the printer at all, even after fiddling with IP addresses and all that. Today, the printer showed up and I printed a test mail message, but when I went to print an attachment, the LJ was gone.
    I have installed all the software updates available through 1/5/06. Why does it come and go? How can I get it to automatically be there? Oy!
    Thanks,
    Brooke

  • Need an app to edit and sign word documents (sign with stylus)! Notability let's me sign but doesn't pull up letter head, quickofficepro let's me edit but not sign. Looking for an app that does both

    I am looking for an app where I can edit word documents as well as sign them.  I am a physical therapist whose looking to cut down on paper work.  Someone types my evaluations and then we print them out for me to edit by hand and then they go back and make the corrections on the computer then w print them and sign them to send off.  Recently I have begun using apps where I can pull up the document and edit it thru quickofficepro or through cloudon, but I cannot sign them using a stylus pen.  I also have notability which I can use to sign the documents, but it doesn't save the document as a doc, it's either a PDF or rtf. Also, in notability, it doesn't pull up the letter head for our company which is a template with our logo on it.  So I need an app where I can both edit and sign my documents by hand using a stylus.  If someone could provide me with any relevant information I would greatly appreciate it.  Thank you for your time.

    Hi,
    Pages for Mac OS X, the topic discussed in this community won't do it.
    I think you'll have a better chance for a useful answer in either the Using iPad or the iPad in the Enterprise community.
    Regards,
    Barry

  • Difficulty syncing and sharing 3G/GPRS connection with NokiaN75 post 10.5.2

    Prior to 10.5.2 (Feb. '08) I was easily able to use isync and share my Nokia's 3G/GPRS connection with the MacBook Pro. Whenever I needed to access the Internet or check my email, I could easily and simply establish the connection with the phone via Bluetooth and use the phone's access to the Internet. While not blazing fast, it was quicker than dial up and worked well when traveling and when you didn't want to pay $12.95 for 24 hour access...
    Since 10.5.2 I believe, I have had difficulty syncing - I get error messages saying that the synchronization failed. I can no longer connect and share the 3G connection, - an error message about PPP...Can anyone suggest a work around or perhaps Apple's engineering can put in a fix in 10.5.3??? Downloading the isync plug in from Nokia had no benefit...Thank you in advance...

    Actually I was answering Paul who does have an iMac but it doesn't matter one way or the other - the same answer applies. Odd that you have the same settings in security and sharing but it doesn't work in one direction. Are you sure you are using the right password? Have you attempted sharing with a different account on that computer?

  • Can You Edit And Export 60 fps Video With iMovie 10.0.5?

    So the new iPhone 6 and 6 Plus let you shoot video at 60 fps, right?
    Well, my question is, can iMovie 10.0.5 for the Mac let you actually edit and export this video, maintaining its 60 fps frame rate?

    I posted what I found to this thread iMovie 11 10.14 Exporting a 60fps file to Maverick?
    Hope you find it helpful.

  • What is your favorite Mac software for making movies and photo slideshows?

    I've decided that I can't stand working with iMovie - I could swear it's made by Kmart. Can you please suggest a better software to purchase that if much more "user friendly" and creates a high quality product?

    Can you please suggest a better software to purchase that if much more "user friendly" and creates a high quality product?
    No.
    using Macs since '86, I've seen PaintBoxes and Quantel systems at work, sit aside when Masters used Premiere Pro, I do own & use FCE… I have knowledge of Hyperengine, and Avid free …-
    I never saw a simpler metaphor then "sorting slides" as in iM; most post we read here are, because people start to edit their movies with zero-manual-reading…- which works in 90% of cases…
    and, iM supports the same codec as any miniDV camcorder (or even HD)… => not bit gets lost in quality…
    more user friendly with high quality?
    no idea...... (even with less quality…)
    (iM has its hurdles and some real bugs, ask forum members Matti or Karl… but for me, the average user - no problems so far....)

  • ITunes auto changed a bunch of albums to have the same name and art. Any easy fix?

    So iTunes randomly changed a bunch of albums to be The Frozen Borderline by Nico with the album art (the artist names and song names are still the same though). I was just curious is there an easy fix, or do I have to go through and fix it one-by-one manually? Here's a screenshot: http://i.imgur.com/n6hfCZg.jpg

    Please? I really need help on this.

  • Some movies are not syncing into iTunes , while others are . I checked and they are all .mp4 , and is there any other way to sync movies to my ipad ?

    I have tried to sync movies installed on my windows (Breaking Bad) to my iPad so i can watch the series on it , but when I try to insert the episode to iTunes nothing happens 

    Hey there ckhoury13,
    It sounds like your video files may be incompatible with iTunes. Here is an article that will help you determine if your video files need to be converted before they can be moved into iTunes:
    iTunes: Frequently asked questions about viewing and syncing videos
    http://support.apple.com/kb/HT2729
    What video content works with iTunes and mobile devices?
    iTunes:
    Video content purchased from the iTunes Store.
    QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
    Video podcasts.
    iTunes Digital Copies.
    iTunes Store Movie Rentals (Requires iTunes 9 or later).
    Mobile Devices:
    Video content purchased from the iTunes Store.
    Videos that have been shared to iTunes using QuickTime Player (Mac OS X v10.6 Snow Leopard).
    Videos that have been re-encoded for iPod with QuickTime 7 Pro.
    Videos that have been re-encoded for iPod with iMovie, Final Cut Pro, and others. Refer to Exporting a movie from iMovie HD to iPod for an iMovie HD tutorial.
    Video Podcasts that have been created for mobile devices.
    Video files after using the iTunes File > Create New Version > Create iPod or iPhone version option.
    Video files after using the iTunes File > Create New Version > Create iPad or AppleTV version option (iPad and AppleTV only).
    See below for detailed movie specifications.
    iTunes Store Movie Rentals (Requires iTunes 9 or later).
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • What are the advantage and disadvantage of LavView (comprared with C++)?

    Comparing with C++, what's the advantage and disadvantage of LavView? Because now I decide to write a new tool, we can't make sure which language we will use. The old tool was written in LabView environment.

    Visual Basic works pretty well if you would like to have a nice user
    interface and quick development.
    Nam.
    Alvaro Osle wrote in message
    news:3c065673$0$8509$[email protected]..
    > I think it depends on the tool you want to create.
    >
    > For instance, if the aim of the tool is to control different instruments
    > via GPIB or RS-232 and manage the data, I'll definitely go for the LabView
    > choice. LabView is a really powerful software in order to communicate
    among
    > different instruments and process, manage and show the information in the
    > PC. It's easier than C++ to communicate with instruments and many drivers
    > are available.
    >
    > If you don't need to control any external device, I wouldn't use LabView.
    >
    > Alvaro
    >
    >
    > may <
    [email protected]> wrote in message
    > news:[email protected]..
    > > Comparing with C++, what's the advantage and disadvantage of LavView?
    > > Because now I decide to write a new tool, we can't make sure which
    > > language we will use. The old tool was written in LabView environment.
    >
    >

  • How to verify if backups are set up and running on Hyper-V with Ubuntu 12.04 on vm ?

    I have Windows Server 2008 R2 with Hyper-V installed and Ubuntu 12.04 running on a VM.
    I would like to be able to verify if Windows Server Backups are in fact backing up the Ubuntu VM.
    From within Hyper-V Manager no snapshots appear for the VM.
    I have done a lsmod on Ubuntu to verify if LIS is installed , this is the output:
    Module                  Size  Used by
    vesafb                 13844  1
    joydev                 17693  0
    hid_hyperv             13164  0
    hid                    99559  1 hid_hyperv
    mac_hid                13253  0
    psmouse                87603  0
    serio_raw              13211  0
    i2c_piix4              13301  0
    lp                     17799  0
    parport                46562  1 lp
    hv_netvsc              22939  0
    hv_utils               13540  0
    hv_storvsc             17896  2
    hv_vmbus               34543  4 hid_hyperv,hv_netvsc,hv_utils,hv_storvsc
    floppy                 70365  0
    A ps -ef outputs this:
    root       217     2  0  2013 ?        00:00:00 [hv_vmbus_con]
    root       218     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       219     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       220     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       221     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       222     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       223     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       224     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       225     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       226     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
    root       227     2  0  2013 ?        00:00:00 [hv_vmbus_ctl]
     (not the entire output, just what I think is relevant)
    When checking the registry on Server 2008 I cannot find the key
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WindowsServerBackup\Application Support\{66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
    as described how to setup in this link: http://support.microsoft.com/kb/958662
    From what I can gather VSS will be able to run without the need to shutdown the Ubuntu VM but the backups are not running when Windows Server Backups run?
    How can I verify IF any backups of the VM have run successfully at all?
    I am new to Hyper-V - but from what I can see , it seems that no VM backups are running . The normal Windows Server backups are running nightly. I would like them to run together without having to restart/ take offline/reboot the VM.
    This is a production server and I need to avoid rebooting as much as possible-

    Hi Sir,
            The following daemons must be installed manually for Ubuntu distributions:
    VSS Snapshot daemon – This daemon is required to create live Linux virtual machine backups.
    KVP daemon – This daemon allows setting and querying intrinsic and extrinsic key value pairs.
    To install both daemons, please use the following command:
    Copy
    # sudo apt-get update
    # sudo apt-get install hv-kvp-daemon-init
    # uname –r
    <kernel release>
    # sudo apt-get install linux-tool-<kernel release>
    # sudo apt-get install linux-cloud-tools-<kernel release>
    Please refer to note 5 , 9 within following article :
    https://technet.microsoft.com/en-us/library/dn531029.aspx
    As for linux VM running on hyper- v, I would suggest you to try to get further assistance from this forum:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=linuxintegrationservices&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Maybe you are looking for