Are .mp4 files not supported when trying to merge 2 videos into 1 video?

Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough. But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

Similar Messages

IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
Does anyone have any ideas on how to fix it?
Thanks.

Your iPod Nano firmware and iTunes updated to the current versions?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.

Cs5 gives error that camera type is not supported when trying to open raw files but worked fine earlier

Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
THis is what I get when trying to open files. Half my session opened fine then all of a sudden i get this error. Won't open in LR5 Either. HELP! using LR5 AND CS5 ON A IMAC with a canon 5dm3. everyhting is up to date as i I checked..

I will try that now. It reads that it is up to date but I will reinstall. The session after it loaded just fine on the same card

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

File not found when trying to call a dll on LabVIEW Real Time machine

I have a dll called "DLLRTTEST" that I've written, and have succesfully called on my host machine. I'm now attempting to call this dll from a vi that is located on my real time computer. Currently I get an "Error 7 occurred at Call Library Function Node in DLLRTTEST.vi." message upon execution
In the attached screenshot I'm trying to ensure that the vi I'm running is in fact located on the real time system. I then use a "Check if File or Folder Exists.vi" to confirm that the dll that I'm about to call does exist on the real time system as well. However, I still receive an "error 7 file not found" error from the Call Library Function Node.
Any help is appreciated.
Solved!
Go to Solution.
Attachments:
DLL_Call_Screenshot.png ‏61 KB
DLL_Call_Screenshot.png ‏61 KB

As nathand already mentioned, depending on your C toolchain your DLL will depend on other DLLs. Usually the according msvcrtXX.dll that matches your Visual C version, if you use Visual C, other runtime DLLs if you use a different C environment. These runtime DLLs are even necessary if you do not call anything in any of your functions, since the DLL makes various initialization steps when it gets loaded and that references some C runtime functions nevertheless. Compiling and linking the DLL with static C runtime is usually also not a clean solution since the linked in C runtime will then reference Windows APIs that are not available on LabVIEW RT.
Depending on your version of LabVIEW RT you will have some mscvrtxx.dll files in your system directory but it will be an older one than from the latest Visual Studio version. If you can compile your DLL with that Visual Studio version then you should be fine, but could possibly run into new problems if you later upgrade to a newer LabVIEW RT version. Installing the C runtime distributables from newer Visual Studio versions is unfortunately also not a solution, since it references many (undocumented) Windows API functions that are not available in LabVIEW RT.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

The dreaded "Video Error-File Not Installed" When trying to watch LiveTV in WMC

I'm getting the following error message when trying to use Live TV in WMC:
Video Error
Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart the computer.
On this system my tuners are the Hauppauge HVR 2250 and the Hauppauge HD PVR. It took awhile to set up, but when I click play on a channel I get 10 seconds of video, an audio loop of the same sound over & over followed by the above error message.
I ran into this problem once before on my Home Theater HTPC when trying to access the ATI Cable Card solution. To get that to work I had to uninstall and reinstall Playready. I tried 3 different ways of doing this on my new build & it did
not fix the problem. The only fix I didn't try was the one on Ceton's website that involves a whole lot of deleting of folders.
Since this current build doesn't have a cablecard installed, and gets the non-clear QAM stations from settop box through HD PVR, would it still be the Playready needing to be reset? The symptoms look identical to when I had the previous problem.
These same files play in the BeyondTV that I'm trying to migrate from, so all codecs appear to be onboard. I am using the latest HDPVR MediaCenter driver from the Hauppauge website & the latest drivers on the HVR-2250.
Thanks for any help!

I had this problem after upgrading my graphics card to an AMD 5450 and the solution after a couple of days of hair pulling was one I hadn't come across before in relation to this problem.
It turned out that the problem was caused by the screen refresh rate, it was set to 60Hz by default and I got the Video Error message but if I changed it to 50Hz then playback of recorded programs or watching live TV worked.

Mode not supported when trying to connect mac to tv

I'm trying to connect my Mac to the TV as I do nearly every day using my HDMI cable via the apple HDMI adaptor (don't know exactly what that cable is called). But when I try it cuts in and out in fuzziness for a bit then eventually comes up with the error message on my tv "mode not supported". I can't see any visible faults in the cables at all. Do I need to replace one or both of the cables? Or is there something else wrong? If it's the cables, how do I figure which needs replacing without having to buy both if it's only one of them? Help!

Hi Sneuby,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue on connecting to your Television from ThinkPad T440s.
Recently have you updated the system with any of the application or with drivers from Windows update?
Check uninstalling the Graphic driver from the system.
Please let us know the findings once you have performed the above steps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Sony pj650 says accessories not supported when trying to use Sony ecm-gz1m gun/zoom microphone.

The sony ecm-gz1m says it is compatible with cameras that have the multi interface shoe but when I plug it in it says accessories not supported.

Hi duszac,
Welcome to the Sony Community!
The ECM-GZ1M microphone is indeed compatible with the HDRPJ650V camera. But the Zoom mode is not going to work. Please detach the microphone from the camera, check the setting of your mic, and change it Gun mode before reattaching it again. We recommend attaching the accessories while the camera is turned off.
If my post answers your question,,please mark it as "Accept as Solution". Thanks_Mitch

"Calendar: Feature not supported" When trying to a...

I have Nokia e52
SW: 022.009
and maps ver: 3.03
When I create a note in calendar and add location > Assign from Maps, I get error message: Calendar: Feature not supported
Is there way to fix it somehow?
Will SW update help?

Hi Zwitster,
Please try this code below, it works fine in my environment:
// replace your site URL
using (SPSite site = new SPSite("http://sp/sites/sharepoint2013"))
using (SPWeb web = site.OpenWeb())
// replace the source document URL with your URL
if (web.GetFolder("http://sp/sites/sharepoint2013/customDoc03/custom").Exists)
SPFolder folder = web.GetFolder("http://sp/sites/sharepoint2013/customDoc03/custom");
// replace the destination URL with your URL
folder.MoveTo("http://sp/sites/sharepoint2013/customDoc04/custom");
Please have a look at this article:
http://sharepoint.stackexchange.com/questions/115876/moving-document-set-from-a-documet-library-to-another-with-document-id
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Why are shared files not visible when iPhone4S connected to iTunes?

What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).

This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune.

HT203088 Why are CR2 files not supported? How do I get them to open??

I don't know if this should go in Aperture or not. I have some photos that I took with a Canon 5D Mark III that are .CR2 and I CAN NOT get them to open in Camera Raw. I have updated all of my software with the exception of the adobe products. How do I get the .CR2 files to open???

Kbrian
According to Apple the Canon 5D Mark III is supported in Aperture 3 or later
http://www.apple.com/aperture/specs/raw.html
I am not a Canon user - but perhaps this model also allows you to save a small RAW file - perhaps called sRAW?
This may not be supported by Apple
Be aware, that although the file has a CR2 file suffix, every RAW file is unique to the model that generates it and has to be individually supported by Apple via a system level update
Hope this helps
Brian

Is XMP import/export for MOV/MTS/MP4 files not supported?

I have been evalutating LR4 and am stuck on how to import my files from another DAM into LR4.
I am able to write XMP into JPG files, and provide sidecar XMP files for RAW (CR2) and MOV/MP4/MTS files, writing my hierarchical keyword information into the xmp-dc:Subject and xmp-lr:HierarchicalSubject fields.
LR4 seems to read the XMP keywords from the JPG and RAW files just fine and re-creates my keyword hierarchy.
LR4 seems to ignore on import the XMP for the non-image files such as the MOV/MP4/MTS files for which I have provided sidecar files.
LR4 also does not write out XMP files for the non-image files, when I use save Medatada.
Does LR4 just ignore import/writing XMP for these non-image files?
Thanks,

MTS files can't really accept metadata embedding -your best bet is to use ClipWrap to "re-wrap" AVCHD/MTS files into MOV files.
This still does not fix the problem of LR not writing XMP data to video files. Unfortunately, if you want to have metadata that stays with your MOV files, you'll want to use something aside form LR4 -I wouldn't bother doing much video cataloging in LR4.

Why are my files not available when checked out?

I have a relatively new Win 7 box, running TCS 4. So in Frame 11, I have checked out a book (using CMS/SharePoint) and everything checks out ok. But when I go to edit the files, they all have question marks and if I try to open them, the message is "cover.fm does not exist." for example.
Also, a long file directory is showing instead of just the file name.
Other users with similar setups are not having this problem.
I can work with other books just fine, but not this one (which is the MAIN one I use FM for!).
Help!

FM uses the relative path from the book location for the filename displays in the book. If the book and files are all in the same location, then the FM will just display the filename. I'm not certain how it's handling things if you're checking things out of a repository, but it should have everything in the same folder, so relative naming should be expected.

Why are my files not enabled when I try to file place?

I'm running Mac OSX Lion 10.7.3. When I try to "place" a file in a document, the files are greyed out in Finder's window. Each time, I have to choose "Enable all readable documents" in bottom of my finder window to make them available.
PS 5, by default, showed them as enabled. Can anyone HELP?

Have you tried resetting your preferences? That usually clears up issues like this. FAQ: How do I reset my preferences?

After accessing a web site through a link I get the message file not found when trying to access it again.

This has happened on several sites. I have tried to access the same links through Chrome and do not have a problem there.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

Are .mp4 files not supported when trying to merge 2 videos into 1 video?

Similar Messages

Maybe you are looking for