Are multiple rows of tabs a planned feature for Safari?

I've been a Mac users for almost 5 months now. A feature I've really missed from my previous browser( Firefox) was multiple rows to make it easier to navigate my tabs. With every Safari release, the 1st thing that I check for is support for multiple rows of tabs.
Otherwise, I really love this browser, but the lack this feature really bugs me. I wonder if there is some technical limitation that is rooted the way that Safari is designed that makes this feature extremely difficult to implement.
Does any know if Apple has plans to add this feature in Safari 8.x or 9.x?

thanks, I was afraid of that. I dropped Apple a line
Please add the option to configure Safari to create tabs as multiple rows of tabs in the case that the width of open tabs exceed the width of the Safari application window. This is feature is common in modern browsers, and it has become the de facto standard by which users evaluate Web browsers.
Let's hope that they listen!

Similar Messages

Tabbedpanels: if multiple rows of tabs, then weird horizontal "movement"

I probably have a relatively unique situation, so I wonder if anyone has encountered this before and has some solution.
I have a page with a number of TabbedPanelsTabs. I have so many that there are two rows of tabs. What seems to happen is that if I click on one of the tabs in the first row, the second row's tabs moves to the right of the clicked tab. If I click any tab in the second row, the tabs go back to where they should be.
Here's what it looks like when a tab in the first row is clicked:
Here's another example of a clicked tab in the first row:
Here's an example of the tabs going back to normal when a tab in the second row is clicked:
Thanks for any advice you might have!

Keep in mind that the tabs themselves are list items that are floated to the left. If a tab/list item is deeper than the rest (perhaps with an added border...it need only be a pixel deeper), it blocks the rest of the 'second row' list items from floating all the way over to the left.
Remedy: make sure all the tabs are exactly the same height, in all states (hovered and not hovered).
Beth

TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Multiple Rows of Tabs

Hello,
I'm using Apex version 4.1.
Is it possible to have multiple rows of standard tabs that show all at once? Basically I want, say, 5 tabs per row with no parent tabs. The reason I want to do this is because our end users' monitors sometimes aren't wide enough to show all the tabs on the right side of the page. So I just want multiple rows on the left side of the page so that all tabs are easily visible at all times.
Thanks for your help.

Hi Greg,
How about you go to shared components and create a list. and chose the template of "Centered Tab Set" or " Tabbed Navigation List" or "Page level Tabs List"
Maybe you need to put that list on your Zero page... to show up on all pages of your app...
Regards
Fateh

Multiple rows in BI Infocube/or DSO for one row in source system

Hi Gurus,
I have a typical scenario where in I have a ztable in R/3 system and it contains some custome transaction data.
The business scenario wants it to split into multiple records in BI ( ofcourse keys for each records in BI would be unique). Either infocube or DSO can be used to store the data in BI.
Is it possible to do that. As far as my knowledge goes( I have limited BI exposure) one record from source system ( read row) is transformed into one record ( row) in BI in simple transformation.
Please give me some rough idea if its possible how can we achieve it.
I know we can write an ABAP program and create a ztable to do it and use the ztable as source for incube/dso. But I want to use this as last option.
Thanks
Sumit

Hi,
An ODS will be better.
Use a start routine.
data-package --> package2
create your own package with your rules.
update.insert.modify.append....
package2 --> data_package
and from 1 row, you create n row as your rules would like..
Regards,

Are multiple inits with different selection criteria possible for LO

Extractor 2lis_02_itm?
Thanks
Reddy

Hi
we use the multiple init scenario whenever there are huge data volumes for initialization and just to get the set up tables filled up in case of LO extraction, with minimum downtime (as the downtime can take upto 2-3 days) so as not to affect the users and also risk losing data, we do multiple inits to reduce the downtime and get the set up tables filled up.
Yes in your extractor you can but be careful the selection crieteria does not overlap
Hope this helps
Anand Raj

I can't find an option to 'Close all tab's on exit' for safari 5.1

I might be missing something simple. can't find the solution anywhere on the web.

This is due to the Resume feature in Lion. Safari will keep your windows and tabs for next time. You can press Command+Option+Q on your keyboard, which will close Safari and discard all tabs.

Why no tab add-ins that enable multiple rows for Firefox 4???

I geneally have lots of tabs open at any given time. I traditionally use TabKit, TabMix, and others that let me use multiple rows of tabs (among other options). I have not been able to find ANY add-ons that support multiple rows. There is sadness across the land.

The mentioned "Multirow Bookmarks Toolbar Plus" add-on specifically addresses bookmarks, while the question is regarding the tabs.

How to genereate multiple IDOCs from multiple rows in a single flat file

HI,
I am working on a scenario where I need to genereate a IDOC per one row in a flat file.
I created DT of following strcuture:
DT_TYPE
--DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
IDOC is
ZIDOC
IDOC----1..1
-BEGIN-Required
-SEGMENT1---1..1
-SEGEMENT2-1..1
-SEGMENT3-1..999
To create multiple IDOCs if there are multiple rows in a flat file in MM i choosed occurances as 0..unbound in Signiture tab
Source structure:
Messages------1...1
-Message1--1....1
DT_TYPE------0..Unbound
DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
Target Strcuture:
Messages----1....1
-Message--1....1
ZIDOC----1....1
IDOC------1..1
BEGIN---Required
SEGMENT1-----1..1
SEGEMENT2---1..1
SEGMENT3---1..999
I am unable to generate two IDOCs if there are two rows:
Am I missing some thing?
Thanks
Rajeev

HI,
I am working on a scenario where I need to genereate a IDOC per one row in a flat file.
I created DT of following strcuture:
DT_TYPE
--DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
IDOC is
ZIDOC
IDOC----1..1
-BEGIN-Required
-SEGMENT1---1..1
-SEGEMENT2-1..1
-SEGMENT3-1..999
To create multiple IDOCs if there are multiple rows in a flat file in MM i choosed occurances as 0..unbound in Signiture tab
Source structure:
Messages------1...1
-Message1--1....1
DT_TYPE------0..Unbound
DETAILS -
0..Unbound
F1------0..Unbound
F2------0..Unbound
F3------0..Unbound
Target Strcuture:
Messages----1....1
-Message--1....1
ZIDOC----0....unbound
IDOC------1..1
BEGIN---Required
SEGMENT1-----1..1
SEGEMENT2---1..1
SEGMENT3---1..999
I am unable to generate two IDOCs if there are two rows:
Am I missing some thing?
It isnt possible with out BPM?
Thanks
Rajeev

Merging multiple rows in to a single row (when rows meet merging criteria)

Hi
I have a scenario to merge multiple rows in to a single rows when the data in those rows fall in merge criteria .Below is how my data is
Now the merging logic for the above rows is , we need to combine multiple rows in to a single row when the data in those rows permits us to do in that way. Simply saying , its like sandwich where we combine multiple things to a single piece.The output for
the above rows should be
Here we combined Row 1 ,2, 3 in to a single row as the data in those rows permits to merge in to single row. But the row 4 cannot be combined to any of those rows because the data in those rows doesn't permits us do a merge ( As the value of the column
JobSource for the row 4 is different from the other rows ) .
My original data has 56 columns , but for readability i kept only 9 columns.
can you please throw some idea on how to achieve this scenario. I know we need to use CTE for achieving this, but i am not able succeed in doing an iteration on multiple rows.
Appreciate your response .

Thanks for your reply .
Rule for merging is simple . First of all there is no unique row identifier for each row , the fact table is not having an identity column in the database . I called row 1 , row 2 etc in my post above only to make better explanation of my scenario.
The rule for merge is below.
1) we can combine only when the data in a column for one row is null & the data in same column for the other row is not null . It should also satisfy the condition where the data in other columns should conflict each other.
2) Data for all columns for the merging rows should not be conflicting (i.e. we should not merge the rows when the data in a column is not equal to the same column in the other row
,considering not null value)
Steps in merging the above source data :
1) Consider the case of row 1 and row 2 in the source, we can combine these rows as the data is satisfying the rule 1 for columns (Jobsource,Flight, Package,Update,Iscancelled
,Result, Severity) and columns (JobID and RuleName ) fall under rule 2. we merge these two rows in to a single row and keep in that in the table.
2) Then the resulting row is again merged with the second row which is present above by applying the rule 1 and rule 2 . Below would be output of merge operation.
Now there would be only two rows in the output . But these rows cannot be merged as the data doesn't satisfy the merge rules 2 . As Jobsource for the row 1 in the above output is "PresubmissionSource" which is not equal
to "PostSubmission" jobSource which is in row 2. So these two rows are left unmerged .So the above two rows would be the output of merge operation on my source data.
This process has to be repeated for all the rows in the table. As of now my table as 92 Million rows with 56 columns which need to be considered for merging rows. I replicated my scenario in 9 columns and 4 rows to understand better.

Update row in a table based on join on multiple rows in another table

I am using SQL Server 2005. I have the following update query which is not working as desired.
UPDATE DocPlant
SET DocHistory = DocHistory + CONVERT(VARCHAR(20), PA.ActionDate, 100) + ' - ' + PA.ActionLog + '. '
FROM PlantDoc PD INNER JOIN PlantAction PA on PD.DocID = PA.DocID AND PD.PlantID = PA.PlantID
For each DocID and PlantID in PlantDoc table there are multiple rows in PlantAction table. I would like to concatenate ActionDate and ActionLog information into DocHistory column of DocPlant table. But the above update query is considering only one row from
PlantAction table even though there are multiple rows that match with DocID and PlantID.
DocHistory column is of type NVARCHAR(MAX).
How do I fix my query to achieve what I want ? Thanks for the help.

UPDATE DocPlant
SET DocHistory = DocHistory + CONVERT(VARCHAR(20), PA.ActionDate, 100) + ' - ' + PA.ActionLog + '. '
FROM PlantDoc PD INNER JOIN PlantAction PA on PD.DocID = PA.DocID AND PD.PlantID = PA.PlantID
We do not use the old Sybase UPDATE..FROM.. syntax. Google it and learn how it does not work. We do not use the old Sybase CONVERT() string function. You are still writing 1950's COBOL with string dates instead of temeproal data types.
You also did not post DDL, so we have to guess about everything. Does your boss make you work without DDL? How do you do it?
>> For each DocID and PlantID in PlantDoc table there are multiple rows in PlantAction [singular name?] table. I would like to concatenate ActionDate and ActionLog information into DocHistory column of DocPlant table. <<
Why? What does this new data element mean? This is like dividing Thursday by Red and expecting a reasonable answer. Now, non-SQL programmers who are still writing COBOL will violate the tiered architecture rule about doing display formatting in the database.
If you will follow forum rules, we can help you.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Select multiple rows in a grid

Hi All,
I want to select multiple rows in a grid on click of a button, there is no checkbox there are multiple rows which need to be selected like we do on pressing shift key on the keyboard. Please suggest how can this be done.
thanks in advance.
Regards,
Anju

Hi Anju,
You can check this link to solve your problem:
https://wiki.sdn.sap.com/wiki/display/Snippets/ALV%2bGrid%2bDisplay%2bwith%2bcheckbox%2bto%2bprocess%2bselected%2brecords%2bat%2bruntime
Hope it helps you.
Thanks & Regards,
Sarita Singh Rathour

How to create multiple rows (manual) in jdeveloper (ADF) 11.1.1.1.0 ?

Hi,
I want create a multiple rows in detail section(data grid) for manual entries.
can you give me an example regarding this?

Is it just me, or is this question basically incomprehensible?
I want to create multiple rowsthat I can parse
in detail sectiondon't have a clue what that is
(data grid)don't know what that is, either - are you talking about some specific component?
for manual entriesI'm guessing that when you get the multiple rows created "in detail section (data grid)" that a user will be able to key in the values. Is that correct?
Sorry to pick on you, but your question is so vague as to defy anyone being able to help.
Best,
John

Splitting a message with multiple rows from the JDBC Adapter

Hi,
I'd like to split the resultset message with multiple row elements and process each row separately..
Does someone have this experience?
Thanx, Peter

Hi Chandrasekhar,
I tried to follow your advise, but I'm not able to complete the process correctly.
Let me explain my process:
First - output from the JDBC adapter goes into the first receive step. Of course, there are multiple ROW elements. (Should be marked the ingoing message marked in the container as Multiline??)
The next should be the transformation:
format of the source message is like
<message>
<row>
<column>w</column>
</row>
<row>
<column>w</column>
</row>
</message>
In the message I have the ROW element as 0..unbounded
and <column> element exactly 1
This message should be mapped to multiple messages of the format:
<message>
<value>w</value>
</message>
How should be the mapping be done?
Is it N:1 or 1:N (because in another thread there was an 1:N mapping advised)
Then (as you say) should follow the Block step:
Which message (container element) should be marked as Multiline? And what does it mean: Current Message?
Can you give me some advise, when and how to use the multiline mark?
Thanx a lot, Peter

Multiple rows in table popin

Hi Experts,
I have a requirement to have multiple rows in the table popin, that is , having a table with multiple rows as the table popin.
For further information, the exact requirement is , there is a table which will have one of the column containing a button, EXPAND , clicking which a table needs to be displayed below the row, (same as it happens for Table popins) and EXpand button becomes COLLAPSE button after it is clicked. Now clicking the Collapse button should close the table showed in Table popin.
Kindly help for the above requirement.
Thanks in Advance for help
Shilpa.

LOOP AT wd_this->comp_tab INTO w_comp_tab.
     lv_uielement_id_prefix = lv_uielement_id_prefix && iv_col_num.
      IF w_comp_tab-name NE 'SELECTED_POPIN' .
        l_new_col = cl_wd_table_column=>new_table_column(
                      id    = w_comp_tab-name
                      width = '100px' ).
        lr_header = cl_wd_caption=>new_caption( text = w_comp_tab-name ).
        IF w_comp_tab-name EQ 'PRODUCT_ID'.
**      link to action
          CONCATENATE w_comp_tab-name '_LINK' INTO l_link_id.
          lo_link_to_action = cl_wd_link_to_action=>new_link_to_action(
                               id   = l_link_id
                               text = 'PRODUCTID'
                          on_action = 'SET_POPIN'
          l_new_col->set_table_cell_editor( lo_link_to_action ).
          DATA: lr_el_details_cont TYPE REF TO if_wd_view_element.
          lr_container ?= lr_el_details_cont.
         Transparent container
          DATA lr_transparent_container TYPE REF TO cl_wd_transparent_container.
          DATA lr_table_in_table_popin TYPE REF TO cl_wd_table.
          lv_uielement_id = lv_uielement_id_prefix && '_POPIN_CNTR'. "#EC NOTEXT
          lr_transparent_container = cl_wd_transparent_container=>new_transparent_container(
              id                       =   lv_uielement_id "'TRANSPARENT_CONTAINER1'
              height                   = '100%'             "#EC NOTEXT
              width                    = '100%'
              accessibility_descr      = 'TRANS_ACC'
              is_layout_container      = 'X'         "#EC NOTEXT
              view                     = view
          DATA l_popin_layout TYPE REF TO cl_wd_matrix_layout.
          l_popin_layout = cl_wd_matrix_layout=>new_matrix_layout( container = lr_transparent_container ).
          lr_transparent_container->set_layout( l_popin_layout ).
         lr_container->add_child( the_child = lr_transparent_container ).
          DATA: l_item_node TYPE REF TO if_wd_context_node.
          l_item_node = l_node->get_child_node( 'SUB' ).
          l_popin = cl_wd_table_popin=>new_table_popin(
          id = 'POPIN'
          on_close = 'CLOSE_POPIN' ).
         DATA: i_the_content TYPE REF TO cl_wd_uielement.
         i_the_content ?= lr_transparent_container.
          IF l_item_node IS BOUND.
            cl_wd_dynamic_tool=>create_table_from_node(
                   EXPORTING ui_parent = lr_transparent_container
                             table_id = 'MULTIV_TAB'
                             node      = l_item_node
                   RECEIVING table     = lr_table_in_table_popin ).
          ENDIF.
          "Add the Transparent Container to the Table Popin
          l_popin->set_content( lr_transparent_container ).
          " add popin to column
          l_new_col->set_popin( l_popin ).
        ENDIF.
        l_new_col->set_header( lr_header ).
        " add column to table
        lr_table->add_column( l_new_col ).
      ENDIF.
    ENDLOOP.

Are multiple rows of tabs a planned feature for Safari?

Similar Messages

Maybe you are looking for