Are my Modem Level Within Normal Limits

I having all these correctables and uncorrectables. Are my modem levels within normal limits? Any help will be greatly appreciated.

rxman4453 wrote: ... Are my modem levels within normal limits? ...No. Your upstream levels are too high. With DOCSIS 3 bonded channels, they should be below 50 dB. Check to see if Comcast is reporting an outage for your area by logging in to https://customer.xfinity.com/Secure/MyServices/ or by checking the voice response system at 1-800-Comcast.
If no outage is reported, see Connection Troubleshooting Tips. If you'd rather have them do the troubleshooting call them at the phone number on your bill or 1-800-Comcast and have them send a tech out to identify the cause and correct it.
If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit unless you have their Service Protection Plan (http://www.xfinity.com/spp/, about $5/mo). If the trouble is due to a faulty Comcast modem, eMTA, gateway device, or anything outside your home, you shouldn't be charged.

Similar Messages

Hi, I bought an original iPhone 6 from an authorised dealer in China, however on the back of the phone, the FC, CE, and other safety logo symbols are missing. Is this normal for the chinese iPhone 6?

Hi, I bought an original iPhone 6 from an authorised dealer in China, however on the back of the phone, the FC, CE, and other safety logo symbols are missing. Is this normal for the chinese iPhone 6?
Thank you for your help!

caxx wrote:
Also very strange is that I don't have the folder "MobileSync" in /Library/Application Support/MobileSync on my computer. I can't find that folder anywhere.
Correct.
You need to go to ~/Library/Application Support/MobileSync/.
The ~ indicates your User folder not the top level /Library/ folder.
Click on the desktop, then hold Option and go to Finder menu Go and Library will be there (only when holding Option as it is hidden).

Is there a way to fix particular percent of slice area to each level value

Is there a way to fix particular percent of slice area to each level value in a flash pie Chart?
I need a pie chart for Distribution of Escalations by Status; here I have following status Record in my table
5 record for Status: Reopen
2 record for Status: Escalated
2015 record for Status: Closed
12 record for Status: Open
1000 record for Status: WIP
So I am not able to see data in pie chart for Status Reopen, Escalated, and Open, bcz all levels are overlapping each other
So I want to fix particular percent of slice area to each level value(Reopen, Escalated, Closed , WIP and Open)
For e.g. I want to show 15% slice area of chart for Escalated, 10% for Reopen, 20% for Open
25% for WIP and 30% for Closed. So i can see record for all status while that have less data as compare to other
status.
I am using following query for pie Chart….
SELECT
''javascript:dhtml_GetReport_r2(0,0,0,0,0,''''''||''''||STATUS||''''||'''''',0)'' link,
nvl(STATUS,''Unknown'') label,
COUNT(ISSUE_ID) Escalations
FROM XYZ_ITR_MAIN
WHERE 1=1 GROUP BY STATUS;
Thanks
Rathore
Edited by: Rathore on 01-Apr-2010 02:37

Your requirement makes sense from the point of visibility but doesn't make sense having the facts in mind that 2 out of 3034 is always 0,000659195% no matter how you look at it. And a pie chart is always going to give you exactly that. The only thing you can do is to manipulate your data but then what a user will see is not going to match with the reality. So, the only solution I see is to make a bigger chart. Exploding a pie chart is also an alternative but I don't think you can do that currently with the flash charts.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

NW 7.3 - WPC: Area in top level

Hello,
in Netweaver 7.3 the link between WPC Areas and roles now has to be defined as connection instead of external id. I would like to set areas as top-level navigation node
for Example:
WPC Area Public
-- Sub Area About Us
Page 1
Page 2
When I now add it to role I cannot set the connection as entrypoint (flag is disabled in overview, in details it has no effect). So I have to create another folder as entrypoint to show content:
Folder About Us Folder
-- Public
About us
Page 1
Page 2
No I would like to merge About Us with About us Folder, but as the entrypoint setting the merge id settings have no effect.
Does someone has a solution for this?
Thanks,
Frank

Hi Frank,
You may achieve this by creating 2 separate Roles....
Just a thought,
Role X1
---Folder X
Role X11 - Area USx(connection ID)
Role Y1
---Folder X
Role Y11 - Area USy (connection ID)
In both the Portal Roles -
Entry Point would be maintained on Folder X
Merge Role X11 and Y11 with a common Merge ID
..................I did not test this , but just a logical thought to achive the same.
Hope this would help you.
Thanks,
Biroj

What exactly are the free levels of Adobe services?

What exactly are the free levels of Adobe services?

Cloud Plans http://www.adobe.com/products/creativecloud/buying-guide-at-a-glance.html may help

Is it Possible to define Levels within Levels in a Dimension

Hi is it possible to define Levels within Levels in Dimension??

Hi is it possible to define Levels within Levels in Dimension??

Home page i cons mail, i pod, messages etc are twice the size as normal. don't know how this happen and can't fix it, help!

My I phone 4 G home page i cons are twice the size as normal (mail, messages, ipod) etc.
Don't know how this happened and can't fix it help.

Double tap with THREE fingers to turn zoom off. Then go into: Settings>General>Accessibility and turn it off for good.

Does anyone know if my iphone 5s contents are backed up automatically within icloud. Because i need to take back to factory setting and prob will lose everything on my phone

Does anyone know if my iphone 5s contents are backed up automatically within icloud. Because i need to take back to factory setting and prob will lose everything on my phone

If iCloud Backup is turned on in Settings->iCloud->Backup
The iPhone will backup automatically, when its plugged in, locked, and connected to Wifi.
So if you let it charge while connected to wifi recently for a few hours and did not use it, it probably backed up.
If you can still access the iPhone, you can check the date of the last iCloud backup in Settings->iCloud->Backup

There are too many levels of symbolic links to translate a path name.

Hi
I am copying from our TEST to DEV system, the command being this
cp -r /oracli2/oracle/testora/iAS .
However, the following messages were returned during the process
cp: java There are too many levels of symbolic links to translate a path name.
I checked and there indeed are many symbolic links.
I have checked ML for this and no luck.
Any one have an idea??
Thank you,
DA
Told to tar the files, working on that now.
Edited by: Dan A on Sep 18, 2008 12:11 PM

Hussein what a marvelous suggestion.
That by using cp -RPI can avoid doing a tar ...
I am copying the applciation directories from TEST to DEV.
I have copied the iAS directory from TEST to DEV using the tar (appcldev user)
Now with the appdbdev user, I try to do the same and I get an error with tar:
tar: 0511-169 A directory checksum error on media
After checking for the solutions and fining nothing that could help me, I am now simpy copying using the cp -RP.
Now I have (i know this is a UNIX thing) on the target system:
iAS directory that was copied using tar (for appcldev user)
iAS directory where symbolic links were preserved (for appdbdev user)
Is this difference acceptable vis a vis cloning? Or should I go back to the appcldev user and recopy the iAS directory with the cp _RP option?
Thanks again.

Why are my icons larger than normal when I turn on phone?

Why are the icons larger than normal when turning on phone? How can I resize them back to normal?

Double-tap the screen with THREE fingers. Then go to Settings/General/accessibility and turn off Zoom.

Availability check with MRP area at Sloc level

HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram

I am sure you have already moved on from this issue, but what you mention is a limitation prior to ECC 6. You can not identify on the purchasing document the source sloc of the supplying plant. This is why you can not create the STO between sloc MRP areas. I was told this was resolved in ECC 6.
Jon

How to deal with Flash 256 levels of recursion limitation !!

Hi,
I am working on an dynamic flash component. I got data from
xml and based on that data i am creating movieClip.
Now i want to place the movieclip on unique place, for that i
had implemented some logic using currently created movieclip
hitTest with already placed movieclip.
This will work fine till the data from xml is small in
length. But when the number of data is incresed in xml. I got an
error as ..
"256 levels of recursion were exceeded in one action list.
This is probably an infinite loop.
Further execution of actions has been disabled in this
movie."
Is there any way to fix this ?
Thanks in Advance

what this means is that there is a error in your logic, and
that there is a repeating statement that is not terminating - this
is often associated with a 'while' loop - although a 'for' loop can
also cause this type of error if the condition cannot be satisfied.
for instance, if your hitTest can never find a position within 256
attempts, the loop will fail and throw the error.
the solution is not to 'change the setting' of 256 and it
doesn't have anything to do with the amount of data coming in from
the xml - although it is possible that there is an error in the xml
data that could be causing this to occur.
please post the code you are using, and an example of the xml
node structure (ie. the data you're using to make the
construction);
EDIT: *&@^&$&#^@^%@ lmao kg :)

Difference between Low level and Normal IMAQ ?

There are two options in IMAQ palette a low level and a normal one. Both have the same function names and the same icons the only difference being the balck and white icon of low level functions and colored icons of the normal functions. What is the difference between these two and what is the need of making a low level palette of functions ?
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2

Low level imaq functions gives you relatively more function to control the hardware. Buffer functions is one which is not there on the high level palatte

What order are Nodes Syncronized in within the same NodeCollection?

Basically is there a guarantee of synchronization order within a NodeCollection? I assume that there is and that it is based off the order in which the nodes were created. For instance in the SimpleChatModel the Node creation order is:
HISTORY_NODE_EVERYONE
HISTORY_NODE_PARTICIPANTS
HISTORY_NODE_HOSTS
TYPING_NODE_NAME
When synchronizing will I receive all of the messages in HISTORY_NODE_EVERYONE before I receive *ANY* messages for HISTORY_NODE_PARTICIPANTS? Will HISTORY_NODE_PARTICIPANTS send all of its messages before HISTORY_NODE_HOSTS sends its messages? When I say "sent" I don't as much what the actual network traffic is (I don't care about the actual packet order of arrival, that is your job AFCS developers ), what I really care about is whether ItemRecieve for HISTORY_NODE_PARTICIPANTS can get executed while HISTORY_NODE_EVERYONE is still receiving messages?
To take this a step higher in the hierarchy to the NodeCollection level does a NodeCollection need to be fully synchronized before another NodeCollection (that called subscribe after the first one) can get any ItemRecieve messages? If NodeCollection A subscribes before NodeCollection B is A guaranteed to get synchronized before B? Will A finish Synchronizing before B gets its first message?
I am starting to run into an issue where I need to make sure certain NODEs are synchronized before I start recieving messages in other NODEs. I of course can check for the dependencies on reception and simply defer execution until the dependency is sync'd but this will create a lot more code failure points than I really wanted. I was hoping for a simplier way of doing this.
Ves

Hi Ves,
The AFCS dev guide mentions this in passing (3.1.5.1) but doesn't go into quite enough detail - we'll make a note to improve this for the next go-round.
Essentially, all items for a given CollectionNode (from all of its nodes) are synched in the order that they were published, irrespective of which node they were published to. You can actually put a breakpoint down in MessageManager.receiveItems to watch this - all items for the entire collection are received in one big blob, then pushed onto an array, then sorted according to their timestamps and order, then sent as itemReceive up to the collectionNode.
So yes, you could easily end up with an itemReceive for EVERYONE, followed by an itemReceive for HOSTS, then another one for EVERYONE. We make sure that they essentially come in the same order they did for people who were actually in the room at the time. For example in the chat pod, if I asked a question to the HOSTS node, which they answered on the public EVERYONE node, I'd want the items to be received in the right order, or the collective history wouldn't make sense.
For separate CollectionNodes, their synchronization are kept separate (one at a time), since they're the result of individual subscribe() requests - the advice here is that if you have a series of items that have some dependency on order of arrival, you should make sure they're part of the same CollectionNode (which makes sense). If you need A to finish synching before B begins, put those items on different collectionNodes and call their subscribe() methods in that order. So, you can have it either way, depending on how you want to set it up.
hope that helps
nigel

Ideal input level for mastering limiter?

Hi,
I am mastering my own electronic dance music tracks, and have a question regarding input levels when using a mastering limiter.
Typically, I mix down to a 24-bit, 44.1k stereo .wav file with a max peak level of -6 db.
My question is this: in the mastering process, will a mastering limiter work better if the input level is brought up prior to hitting the limiter, for example, by using Logic's Gain plugin? Or is it better to leave as much headroom as possilbe before hitting the limiter?
Thanks for anyone's help.
Cheers

Hey KC,
Good article, thanks. I'd already read a lot of material on Ian's web site and watched a few of his videos, and I consider him a good authority on the matter. Within the article you suggested, I found that answer, which is Ian talking about how, if you push a limiter too hard, the sound degrades - and this is something I thought I had noticed, to varying degrees, with different limiters. So thanks for that reference, I really appreciate it, and thus question solved
Also, just want you guys to know that:
a) I do use gentle compression on the mix prior to the limiter
b) I do sometimes use side-chain compression on the bass, and sometimes do the same on mix groups, or other individual instruments, to clear out room for the kick and/or as an artistic decision
c) I am not a loudness freak..really... Seriously though...I do try to keep dynamic range in my material
Thanks again KC & Eriksimon. Cheers

Are my Modem Level Within Normal Limits

Similar Messages

Maybe you are looking for