Are my problems related to ATV2 upgrade?

Hadn't used my ATV2 for a while, but the Remote app on iPhone and iPad showed it there yesterday morning, as well as my Library.  However, when I switched ATV2 on to watch a video I'd put on iTunes, I got no signal from it on my television. The HDMI socket on the tv is fine - my DVD player worked on it when tried.
Apple TV box was responding to its remote control, but displaying nothing on screen. I tried resetting from the remote. Got the correct sequence of flashing light on the ATV2 but still nothing on the TV screen.
It was then that I noticed that the Apple TV wasn't showing in the Airplay optons on iTunes, and had stopped showing on the iPhone and iPad remote apps. After lots of plugging, unplugging, trying other HDMI ports on my tv, unplugging power, rebooting network, etc I was no further forward, so I connected the ATV2 directly by USB to iTunes on my iMac and restored it to factory settings. This is a process which I understand also installs the latest software version.
However, still nothing. I get nothing whatsoever on screen from the ATV2 - no logo, nothing but a blank screen. And the ATV2 still does not show in my Airplay options in iTunes.
I've been reading that the latest software update may be yet amother turkey from Apple. Is this likely to be the source of my problems too?
Cheers,
Tom

Result!
Although the devices I have attached to my TV using the other two HDMI inputs work perfectly, I did the one thing I had not tried to do before, which was to swap all the HDMI leads around to different devices.
Curiously, the lead I had on my ATV2 box works fine on my DVD player and, guess what? The lead that was on the DVD player works with the ATV2. Whoop of joy when the Apple logo appeared, followed by flawless set up process.
All problems now solved. ATV2 connected, successfully logged on to home network, and appearing in the Airport settings on iTunes as well as on the Remote app.
I have no idea why the original HDMI lead failed on the ATV2, nor why it works on my DVD player, but frankly, who cares? Issue now solved.
Winston Churchill, thanks for your interest and suggestions. Off now to cancel my Genius Bar appointment.

Similar Messages

  • What are the problems related when if i bought the iphone 4s or 5 unactivated ????

    what are the problems related when if i bought the iphone 4s or 5 unactivated ????

    Please restate your question with more detail. As posted, there is insufficient
    information for a response. What exactly is your technical question?

  • Problem extending VO after upgrade to JDev RUP6

    We are having problems extending VO after upgrading from JDev CU2 to JDev CU6. The extended VORowImpl java file extends the OAViewRowImpl instead of the VO that we are extending. Other files are fine except for the VORowImpl
    Is there any JDev setting we need to set for CU6?
    Any help/insight is appreciated.
    Thanks,
    Ramesh

    Hi,
    R u mean to say ur extended VO's changed automatically,or ur having problem extending the new VO's.
    Thanks

  • TS1717 are there problems with iTunes upgrading from Vista to Windows 7?

    are ther problems upgrading iTunes from Vista to Windows 7?

    The best method is to use Windows Easy Transfer first to backup all your data, and do custom clean install. And install all your apps and drivers afterwards.
    Yes it should work. Make sure you are ready, and have all the latest drivers and applications ahead of time.
    There are some "gottchas" with the upgrade from Vista.

  • HT4623 Is this the most up to date article on up dating the iPhone - it there anything about the problems relating to the up date to OS 6 - my G3 no longer works and Apple seems to have gone to ground.  No Genius bar appointments available for a week!

    Is this the most up to date article on up-dating the iPhone OS - is there anything about the problems relating to the up-date to OS 6 - my G3 no longer works and Apple seems to have gone to ground.  No Genius bar appointments available for a week!

    iOS 7 devices need iTunes 11.1 or newer to sync.  Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1.  What computer and OS are you running your iTunes on?  From the iTunes download pages I see the requiorements are:
    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store

  • Problem related to PS CS6 ext. on Mac.  Nikon DSLR D610 raw file can not be opened

    Problem related to PS CS6 ext. on Mac. Installation is OK but I can't open picture from my Nikon D610 (Raw NEF format). I get a message "can not open this format ...". Checking Help menu to see if I miss an update the message I get is that I'm up-to-date but at the end Nikon D610 (format supported of course) files can not be opened . JPEG are OK but I work with raw files. Thanks

    What OS are you running: 10.x.x?
    What version of the Camera Raw plug-in do you have?  Do (About) Plug-ins / Camera Raw to find out.
    You need at least ACR 8.3 to open D610 files.  If the Help / Updates process does not work, then there is a manual install process you can do.  The page with the download is for when people accidentally updated to ACR 8.4 and need to roll back to ACR 8.3 due to their OS being incompatible, but the installer on that page works even if you haven’t erroneously updated to ACR 8.4:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • Problems with Mail after upgrading to 10.5.6

    I was using my mail program without problems, until I upgraded to v 10.5.6 - when I tried to 'get new mail' I received the following message:
    There may be a problem with the mail server or network. Check the settings for the account or try again.
    The server error encountered was: The connection to the server on port 110 timed out.
    I contacted my email provider (shaw.ca) and there are no problems with their server. So, I added another email account to check if it was the program, and I'm getting the same response with the new account I added.
    Has anyone come across this issue? Any advice? Thank you!!

    Sorry Made mistake.... Disregard first post
    TRY THIS
    Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
    Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
    checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
    Anyhow...called apple care ...EZ fix
    Quit mail if yer on.
    Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
    Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
    If yer POP settings r right this should work
    It did fer me!!!
    Good luck
    Message was edited by: soboo
    Message was edited by: soboo

  • If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my phone to iOS 7.0, does that have an effect on my calendar, etc.  It doesn't seem to be showing the same data it was before the update.  Lost lot of info from calendar.

    If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my ipone to IOS 7.0, does that have an effect on the linking to my other MAC products.  It seems my calendar has lost a lot of information since the upgrade.

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

    I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
    Richard.

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • What are the problems in Nokia N95 8G ??

    what are the problems in Nokia N95 8G other than cover of camera lens?? thanks very much.

    *** daisy7330 please do not post an off-topic response in a topic not relating to the subject.
    Please post a new topic regarding your problem. ***
    Generally the views I have been seeing about the N95-8GB is its a whole lot better build, and generally better than its baby brother the N95.
    Maybe these links might help?
    http://www.allaboutsymbian.com/reviews/item/Nokia_N95_8GB.php
    http://www.trustedreviews.com/mobile-phones/review/2007/12/16/Nokia-N95-8GB/p1
    http://reviews.cnet.co.uk/mobiles/0,39030107,49294472,00.htm
    Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
    Current: Nokia N900!

  • Hello I have a problem related to synchronization. When you synchronize ipad Section 3 "Other" takes as much memory up to 8 gigobayt. How to make the section "Other" did not increase? Thank you.

    Hello
    I have a problem related to synchronization.
    When you synchronize ipad Section 3 "Other" takes as much memory up to 8 gigobayt.
    How to make the section "Other" did not increase?
    Thank you.

    DOCUMENTS AND DATA IS ALSO WHERE YOUR MAIL INFORMATION IS STORED SO IF YOU ARE A "HOARDER" IN EMAIL, GO INTO THE GMAIL, HOTMAIL, ICLOUD ETC WHATEVER YOU USE, AND DELETE YOUR TRASH, SENT, DRAFTS, ETC.
    THAT SHOULD HELP A LOT.

  • Calendar problems after Mountain Lion upgrade

    Hello everyone,
    I've noticed various problems with Calendar after upgrading to Mountain Lion, but I can't seem to find my particular issue.
    After upgrading from Snow Leopard, here's the situation:
    *Every calendar that I had published has a triangle with an !, saying that the calendar couldn't be updated. This seems backwards, as they are not subscriptions--they are calendars I've created and maintained and published. They were shared using the iCalx webiste.
    *One such calendar, the one I use for myself (not the default one, but a separate one with my name) disappeared and seems to have moved into another calendar. I can rename it and make that useable.
    *All of the other above-mentioned calendars seem to be completely gone. No events or anything in them.
    *All of the calendars I'm subscribed to work fine, except for one from a coworker who also upgraded to Mountain Lion and is having similar issues. That one has an ! in a triangle, too, but I can at least see the events. Seems that that calendar just can't be refreshed.
    Any advice on what I can do to get me calendars back and correct this problem would be much appreciated.

    Go here first,
    http://www.apple.com/support/macosx/mailassistant/
    confirm your settings are correct in the mail App

  • PROBLEM Acrobat X Suite upgrade to eLearning Suite 6.1

    I am a user of Acrobat X Suite.  I just purchased the eLearning Suite 6.1 upgrade for $599, as offered at:
    http://www.adobe.com/products/elearningsuite/buying-guide.displayTab2.html
    I left Acrobat X Suite installed, assuming that the eLeraning Suite needed to see it for the upgrade.
    When I go to install the eLearning Suite, it asks for my serial number.  I enter the new serial number that was emailed to me for my eLearning Suite purchase.
    It then opens a windows titled "Serial Number Upgrade", which states the following:
    "Serial Number you provided is valid, but a qualifying product could not be found on this computer".
    "To use this serial number you must own one of the qualifying products.  Please choose the one you own and enter its serial number."
    The window provides you with a drop down box that lists elegible products that you can use the eLeraning Suite upgrade with, and a place to enter your old serial number.
    THE PROBLEM IS THAT ACROBAT X SUITE is  NOT listed in the list of products!!!!!
    It appears to me that Adobe Sales/Marketing is NOT communicating with their Engineering Department on the products they offer for upgrades.
    HELP! What can I do!  Its a Saturday night and Adobe customer support does not open until Monday.
    Thanks in advance for any help you can offer.

    Mylenium,
    I'm having a similar problem.  I'm upgrading from elearning suite 2.5 to 6.1, subscription, not an outright purchase.
    I am able to download the installer correctly and unpack all the necessary files, directories are created, etc...  BUT, when I get the message listing all the modules that are going to be installed.  The installer tells me Acrobat Pro XI will be installed as a trial version, then the installer goes on and does what it says it will.
    All the modules install correctly and are verified on the Adobe web site.  Alas Acrobat Pro XI will not verify as part of the subscription, and the serial number provided for the subscription, on the Adobe web site, will not activate Acrobat Pro XI, which doesn't suprise me.
    I've been in contact with both customer sepport and technical support, over 12 days and about 9 hours of my time.  going round and round within multiple departments with multiple support personnel.  Still no solution.  But finally I got a single point of contact and an email address so I could ignore all the calls and emails I was getting on this issure, all asking me to start again from the begining.  Finally this support individual has been able to replicate the problem on their machines.  So some progress has been made.  But ........
    I understand that Adobe want to figure out what is going on, but my need is different, I just need to get the software registered so I can move on.  At my billing rate, I've probably spent $1,800 working with Adobe, as opposed to working with my clients, when all they need to do for me, is give me a valid serial number for Acrobat Pro XI, then when they, on their time, figure out what is going on, send me a patch.  Then we can all be happy
    As a tech support professional for over 20 years, in my company, I always have an escelation path for issues such as this, the objective is always to keep the customer happy, something I have NEVER experienced with Adobe Support.
    Any thoughts on how one resolves an issue such as mine within Adobe?
    As I've said to anyone who will listen, if (and when) a vendor bundels all the elearning needs I have, such as Adobe has done, I will switch in a minute.  Over the long years I've worked with Adobe products, this type of support experience has been the norm, not the exception.
    I really like your products, but your support really really really sucks.

  • CCMS Error - There are system problems on the remote host (system failure)

    Hi,
    I have installed the SAPCCMSR agent in the AccAD(Accelerated Application Delivery) server. However, when I execute OS07 and try to view the CPU usage, I encountered this error:
    There are system problems on the remote host (system failure)
    Message no. S1308
    Any idea what does the error mean?
    Thanks.
    KY

    Hi,
    Thanks for replying. The problem has been resolved after upgrading the sapccmsr.
    Thanks.
    Regards,
    KY

  • We are facing problem in BCS activity for Break Entries of Accounts

    Hi All,
    We are facing problem in BCS activity for Break Entries of Accounts.
    We are using 0FI_GL_6 Datasource which do not have Transaction Type field in it. 
    After Extracting data from the datasource (0FI_GL_6), we get GL Account Closing balances for the period, but we require the transaction types for Assets related accounts for the BCS activity.
    Currently We upload the Asstes Data through External Flat files in BI. 
    Can we have these data comming direcltly form R/3 with the Transaction type Field.
    We are on R/3  SAP ECC 6.0 support patch 15  and on BI we are on BI 7.0 with support Patch  SAPKW70020 and SEM-BW SAPKGS6014 , BI_CONT  - 0012
    Can we use GLT3 table, if yes please suggest the steps to Fill the data in this table. Or is there any other table and way.
    Thanks in advance,
    Nilesh Labde

    Is the conversion factor is same for BT UOM  qty to CS is same ?.It seems BT is sales unit and the picking unit for the item is CS.If the conversion is same warehouse pick correct qty.Therte should not be an issue.
    What is the UOM in delivery ?.Is it BT or CS.I think it is CS right ?.If you want to see sales unit is cs then you need to change the material master.

Maybe you are looking for