Are new beta drivers for XP and Xfi fatal1ty any go
Can you share your feelings about the new xfi beta drivers with a fatalty card? I've experienced they are better in terms of stability, but find that games are almost now missing sounds. Weird I know, but it's almost like I am not getting full 32 voice capability. The current drivers Creative offers are ok, but I find that any problems I have had with my system lately always come down to a Xfi driver component.
Anyhow, appreciate your experiences with them...
Well for me I managed to stop it from reverting back to 2. in the Creative Volume Panel by unchecking Syncronize with Control Panel option.
Seems that the problem with what you were mentioning is related to Sounds and Audio Devices, when I did have Creatives Volume Panel Syncronised with Control Panel, when I was playing certian games, it would end up reverting to 2. (which I found annoying) but since I did the above I have had no more issues since
Similar Messages
-
New BETA drivers for TV@nywhere Master
there was a thread somewhere before where someone had found some updated BETA drivers for the MSI TV@nywhere Master card but it seems to have gone now
i've been using them for a while now, and they're very stable, and the picture quality has improved somewhat
they say they are for the Master version of the card, but i think they may work on the Mega PC version, the only difference is the Master has a AM/FM tuner as well
anyone having stability probs in media center III or MSIPVS might want to try them out and see what happens...
i've uploaded them to my webspace, and you can find them here in ZIP format: http://www.ukshazam.com/downloads/8606Master_drv.zip
please note these are BETA drivers and as such MSI won't support them (as if they do anyway
i'll also post this in the Mega PC forumAs I recall when this BETA driver started flying around the forum, they WERE NOT official or unofficial MSI drivers. They were modified by a user from another forum and someone from this forum posted a link to them. THESE ARE IN NO WAY RELATED TO MSI DIRECTLY!! Someone reversed engineered the driver and probly thru extensive testing, via trial and error, was able to clean up the driver to give the result that most have had with them. This doesn't mean that everyone is going to have the same result, which is and has been the reality with any add-on card produced since PC's came out...compatibility issues DO still exist out there and not all systems are going to play in the sandbox well with all add-on cards that are manufactured...something to keep in mind when purchasing new systems...
Furthermore, it's been my experience that proprietary systems (The Pac-10 as I call them...IBM, Dell, Gateway, HP, Compaq, Sony, eMachine, etc...) have more issues than White Box systems when it comes to add-on compatibility. If you don't know this already, most of these companies DO NOT want you to purchase off the shelf items from Best Buy, CompUSA, etc...they want you to have to come back to them for upgrades and add-on devices, at higher than retail prices, and that's where they make the most profit. Sad reality, but true. Case in point: My first retail purchased PC was a Dell XPS Pentium 100, (my prior PC's were purchased from Michael Dell's garage) I wanted to upgrade it to a 4X CDROM drive and Dell had failed to include the snap in side rails for their new innovative case that was tool-less. So I called up Dell support and asked if these rails were available. The CS Rep told me that they were so I asked how much. She asked me if I had bought the upgraded device from Dell and I said no. Then she informed me that they wouldn't sell them to me ($6.00 US) because I hadn't purchased the upgrade device from them. Needless to say I was pissed. This was circa 1995-96.
Anyway, over the years of doing network consulting, I can't tell you the countless times that I've heard this type of thing on the phone from many of the above listed companies...yes, most have gotten better over the years (Like Dell including all of the rails needed inside the case nowadays) but overall they still have the same mindset and it's much more subtle when they design a motherboard that won't play in the sandbox well with retail bought components...*shrugs*
I got tired of playing their game after a while and started building my own systems. I found White Box isn't always better either but for the most part it's been a far cry easier than buying proprietary...
Just my 2 cents here for what it's worth... -
When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill MartinI can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu. -
when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chrisRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
I use an ipod classic 120G. When I try to launch itunes I first of all see a box stating "The registry settings used by itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes" This I have done. obviously I cannot burn CDs but worse still is my ipod is not being recognised by itunes and will not sync. I have not installed any new burning softeware. Any suggestions please?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'. -
Registry settings by itunes drivers for importing and burning cd's and dvd's are missing
I have been getting a message that the registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. I have not added any new software that would create this problem.
Does anyone have a solution?I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Basically we had a new motherboard fitted, we then found our CD/DVD drive had not been reconnected. After this has been done, when we try to burn a cd from itunes, we get the following message:-
The Registry settings used by itune drivers for importing and burning CD's and DVD's are missing. Reinstall Itunes.
I've removed and reinstalled itunes a few times now and we still have the same issue. HELP please.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
What else can I do. Cannot connect any of our iphones or ipods to itunes because of this error.I have edited the registery,
We'd better have a closer look at the keys to see what's going on.
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window. -
We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth? If I run over the 10 mgs, the service either slows way down until it is reset on the first of the next month or I have to purchase additional bandwidth and it can get expensive.
Any information would be greatly appreciated.If you only have a 10MB limit on the Internet connection you might as well not have Internet access and certainly should not attempt to stream anything.
If the limit is 10GB, then you will need to be careful with streaming as most video is 1-3GB for a one hour show. -
I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem
I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao. -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded
many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
Maybe you are looking for
-
Hi, I have created many Calendars in my Sharepoint site like Meeting Calendar, Downtime Calendar etc. I will be creating some events in these calendars every week. My requirement is to collect all the events available in the calendar for that wee
-
MBP 13' Won't boot from CD or external Drive
Recently my MBP 13 (newest version) occasionally crashes with the grey screen death which forces me to hard shut down. This led me to believe my directory may be corrupted so I tried to boot from my external OS X (Snow Leopard) with DiskWarrior insta
-
Error in calling Stored procedure returns REFCURSOR
Hi, I've written a oracle stored procedure returning REFCURSOR. say,extractorderdespatchconfirmsp('','','','','','H1','ACG','','','','',:rc). Following statement throwing error. CallableStatement cs = con.PrepareCall("{extractorderdespatchconfirmsp('
-
Why is the back of my 4G iPhone puffed up?
Why is the back of my 4G puffed up?
-
I have seen this a lot with other web design sites. They have an app for mobile devices to edit their sites. Does Muse have this? If not, do you know if they are working on this for later? This would be a great tool!