Are Nintendo DS headphones compatible with an iPad's headphone jack?

Are Nintendo DS headphones compatible with an iPad's headphone jack? iPad 3rd gen. Wi-Fi iOS 5.1.1

Headphones will fit fine. Now if you want to use a headset (speaker+microphone) that's another matter. DS headsets, which have a seperate prong for mic input, are not compatible with the iPad.

Similar Messages

  • Are Ipad keyboards that are compatible with the ipad 3 compatible with the ipad 4

    Are Ipad keyboards that are compatible with the ipad 3 compatible with the ipad 4?

    Welcome to the Apple Support Communities
    They can be used on a 4th generation iPad without problem

  • Unable to sync or backup my iPad2 with the new iTunes. I keep getting the error ""iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.". I've deleted all the old backups but still get this.

    I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
    When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
    I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.

    I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!

  • HT4356 How to make my printer compatible with my iPad 3

    Hi , I have a Canon MG5250 printer that I want to make compatible with my iPad 3. Have heard I can do this with a plug in or an app,rather than having to buy another printer. Please can you help. Many Thanks.

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • Wired keyboard that is compatible with the IPad 4 and/or IPad Mini

    Is there a wired keyboard that is the size of the blue tooth keyboards that would be compatible with the IPad 4 and/or IPad Mini.

    In general, USB connected keyboards are not supported. However, if you do a Google search, some users have successfully connected a USB keyboard. Sometimes a USB powered hub is needed because the keyboard takes too much power. Also, some of the keyboard special keys may not work.
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • HT4972 Is The new IOS6 compatible with the iPad first generation

    Is The new IOS6 compatible with the iPad first generation

    No, not the 1st gen iPads... The new iOS 6 will run on the iPhone 3GS, iPhone 4, iPhone 4S, and iPhone 5; the iPad 2 and third-generation iPad; and the fourth- and fifth-generation iPod touch.

  • HT4101 Is the Panasonic lumix tz20 compatible with the iPad air lightning cable?

    Is the Panasonic lumix compatible with the iPad air lightning to USB camera adaptor?

    No reason to think its not. The USB adapter is universal. So unless there is something fundamentally different about the Lumix USB interface, or thewy way it stores images on its memory card it should work.

  • I am unable to back up my iPad on my pc. Message says backup was corrupt or not compatible with the iPad.

    I have been unable to sync my iPad with my pc since November 2013. The message that I receive is that "iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad. My iPad is running the most current update and my iTunes program is also the most recent update. What could be the reason for and solution to this problem?

    You might want to try deleting your old backup. That could be the source of the problem.
    Launch iTunes and go to Edit>Preferences>Devices>Your backup name. Click on your backup to select it, and then click on Delete. Click on OK.
    Connect your iPad to your computer and try again.

  • Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?

    Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?
    Can anyone point to a specific reference that says Type 1 fonts should or shouldn't work?

    Hello Nikhil.
    Can you see here?
    MAIN MODULE INFORMATION:
       SAP GUI for Windows
       SAP Logon Pad for Windows
       730 Final Release
       7300.1.0.1074
       1337608
    SYSTEM INFORMATION:
       Operating system: Windows 8 Pro 6.2 (9200)
    You are using patch 0 for Windows 8
    Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
    Patch 7 or higher,.
    Apart from that the error is not from the GUI side,
    See below:
    Previous frontend interpretation time   :           109 ms
    Previous server response time           :          5078 ms (for 1 roundtrips)
    The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
    Please use a supported version for the OS you intend to use.
    You can find this information in note
    http://service.sap.com/sap/support/notes/66971
    Jude

  • Is there a longer charger that is compatible with the Ipad 3?

    Is there a longer charger that is compatible with the Ipad 3?

    http://store.apple.com/uk/product/MC359B/A
    Found this. And it even is from Apple! WOW!
    I have it, bought it at walmart, and yes, it works just fine. Nice to have an extra 6 feet or so.
    then again..yes, an extension cord or power strip will work quite well too.....and leave you an extra 20 dollars or so to play iwth.

  • Are 300 Series switches compatible with pre-standard PoE detection in old Cisco phones?

    Are 300 Series switches compatible with pre-standard PoE detection in old Cisco phones? They don't seem to be (a 7902G won't power on when connected to an SF302-08MP with firmware version 1.1). Is any special configuration needed on the switch to enable this detection?

    Please note that the 200 and 300 Series switches now support Cisco Legacy POE as of September 2011, allowing it to deliver power to 7960, 7940, and other pre-standard phones and APs. Details provided at the following link:
    https://supportforums.cisco.com/docs/DOC-18337

  • What wireless printers are. Compatible with the iPad

    Are there printers that are compatible with iPad that are not apple

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • What cameras are compatible with the ipad ?

    What cameras are compatible with the I pad?

    With the camera connection kit you're able to plug in regular SD cards with one adapter, while the second adapter does include a USB port to plug your camera in. I just remember reading that "most cameras" are compatible.

  • I am trying to open an interactive chart but I am getting a message saying i need flash and it is not compatible with the iPad, is this correct or is there some way around it. Thank you.

    I am trying to open an interactive chart but I am getting a message saying I need to install flash but it is not compatible with iPad, is this correct or is there some way around it. Thank you.

    Flash is not supported on the iPad - and as Adobe have never managed to make a version of their flash player that works on iOS devices, and they have recently announced that they are stopping development on all mobile versions of it, it probably never will be
    Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

  • IOS4.2 is not compatible with all ipad models?!

    Hi everyone,
    I've read the whole http://www.apple.com/ipad/software-update/ page and I saw the line "Not compatible with all models." at the very bottom.
    I'm really worried if I buy an ipad of 16GB wifi model this december, will I get iOS4.2 working on my ipad?
    Thanks!

    I did miss his question I think. For iOS4.1 Apple says:
    Compatibility
    The iOS 4 Software Update works with the second-, third-, and fourth-generation iPod touch. Not all features are compatible with all devices.4
    Thus, I would expect iOS4.2 to a least NOT applicable to the first generation .
    Regarding the question, the superscript is by the iPad not the Ipad. iOS 4.2 will be applicable to all iPads.

Maybe you are looking for

  • How can I execute program after using F4_Filename function?

    Hi all, I'm a new user on the forum. I've been working with ABAP and SAP for a few weeks. I wrote a program for importing data from excel file to SAP using BDC. During searching this forum I found information about F4_Filename function which allows u

  • Trying to create MPEG-2 with .mpg extension

    A client requires an MPEG-2 file with .mpg extension, less than 10 Mbps bit rate, twin channel mono audio. Can I create this in compressor from a .mov? If I choose multiplexed audio and then manually change the extension from m2t to mpg will this wor

  • MaxDB and R3ta - Note 1385089

    I need to start a heterogeneous copy using R3load (Linux --> HP-UX IA64) of a 2,6 TB MaxDB 7.7 and checked beforehand some notes and found the above note stating The general R3ta support for MaxDB will be available for SAP Systems with MaxDB 7.8 and

  • Current action vs action in

    Application Current SQL bxaptxn8wf54j Current SQL Command SELECT Last Call Duration 26:7 (mm:ss) SQL Trace DISABLED Current SQL Trace Level 1 Trace With Wait Information DISABLED Trace With Bind Information DISABLED Open Cursors 71 Program Unavailabl

  • Mail uses 100% CPU--Must "Force Quit" to kill it

    When I start up Mail, it works fine. I scroll through a few messages, Mail is responsive. Then, at some point, I try to read an email, and Mail says "Loading Message" for 5-30 seconds before displaying the email. It's not the same message every time,