Are programs client dependent

HI,
addding to above post. some more info.
Client Independant: These objects are not specific to any client. And it is universal which can be viewed,changed across the clients.
Client Dependant: These are the objects can be viewed, changed for the client for which it has been assigned. Other clients do not have access on these objects.
In SAP, all objects are finally stored as tables. "Mandt" is key field which determines whether the object is client dependant or not.
Client Independant transport requests will make the transported objects available across the clients. and Client dependent transport request make the objects available only for the client mentioned by field "Mandt"
Reagrds
Anver
if hlped pls mark points

Similar Messages

Are risks client dependent or independent in GRC 10.0?

Hi Experts!
My bosses has a question:
Are risks client dependent or independent in GRC 10.0?
Logically I would say client dependent, but they need a much official answer.
Could you please someone give this info, who has an installed system.
Thanks for your help!
Peter!

Hi if you're referring to risks generated after analysis 'YES' it's client dependent, basically you analyse risk against the user/role assignment. If you're talking about the risk for initial load I've no system to check but since they're considered as database table entries from technical standpoint, they're client dependent objects only.
Regards,
Asok Christian

Are HRFORMS client dependent?

Are HRFORMS client dependent?

Hi Gemini.
I would like to suggest my opinion,
[SAP HELP Library - Standard Reference - Client-Dependency of the HR Form Editor|http://help.sap.com/saphelp_40b/helpdata/en/60/d8bc77576311d189270000e8322f96/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Are SAP programs client dependent?

hi,
send me replay

Hello
The following repository objects (basis = 6.40) are defined as client-dependent (-> function module <b>TR_CHECK_TYPE</b>):
LIMU     FSEL     Field Selection     SYST     X
LIMU     VARI     Report Program System Variant     SYST     X
R3TR     COC1     CO: Cost Centers     SYST     X
R3TR     COC2     CO: Activity Types     SYST     X
R3TR     FORM     SAPscript form     SYST     X
R3TR     LODS     HRDSYS: Logical information object client-dep. table E SYST     SYST     X
R3TR     PCYS     HR: Transport standard personnel calculation rules     SYST     X
R3TR     PHDS     HRDSYS: physical information object client-dep. table E SYST     SYST     X
R3TR     SBNL     Logical Information Object for BDS     SYST     X
R3TR     SBNP     Logical Information Object for BDS     SYST     X
R3TR     SBNR     BDS: Relationship Between Information Objects     SYST     X
R3TR     SBPL     Logical Information Object for BDS: Bid Invitation     SYST     X
R3TR     SBPP     Physical Information Object for BDS     SYST     X
R3TR     SBPR     BDS: Relationship Between Information Objects     SYST     X
R3TR     SBRL     Logical Information Object for BDS     SYST     X
R3TR     SBRP     Physical Information Object     SYST     X
R3TR     SBRR     BDS: Relationship Between Information Objects     SYST     X
R3TR     SBSL     Logical Information Object for BDS     SYST     X
R3TR     SBSP     Physical Information Object     SYST     X
R3TR     SBSR     BDS: Relationship Between Information Objects     SYST     X
R3TR     SBTL     Logical Information Object for BDS     SYST     X
R3TR     SBTP     Physical Information Object     SYST     X
R3TR     SBTR     BDS: Relationship Between Information Objects     SYST     X
R3TR     SBWL     Logical information object for BDS     SYST     X
R3TR     SBWP     Logical information object for BDS     SYST     X
R3TR     SBWR     BDS: Relationship between information objects     SYST     X
R3TR     SRHL     SRM: Hierarchical Lists     SYST     X
R3TR     SRLD     Language-Dependent Client-Specific Retrieval Index Objekt     SYST     X
R3TR     STYL     SAPscript Style     SYST     X
Regards
Uwe

Are text elements client dependent

Are text elements of an ABAP program client dependent?

Hi,
These are Client Independent and Language Dependent
Regards
Sudheer

Client dependent & client independent objects

Hi All,
What is meant by client independent & client dependent ?
I know that sapscripts are client dependent while smartfiorms are client independent. Also reports & FMs are client independent.
Want to have a better idea on this concept....
Thanks in advance..
Sweta

If you create a table in 010 client in DEV server with CLNT as its first fields type, then you will find that table structure in all clients in DEV server. (i.e client independent)
example: function module, abap program, smart form.
If you create a record in that table in 010 client, you will not find that record in other clients. (i.e client dependent)
Example: script.
Sap script was developed a long back.
smartform is developed to avoid these type of some restrictions
Also:
Client dependent Means if you create that data in one client is limited to that client only and it is not accessable in other clients
Like SAP SCRIPTS and STD texts data
where as Client Independent means the data if you create in one client that is available in that as well as in other clients
Like SMARTFORMS, All dictionary Objects data and Repository objects data like Programs, Fun modules, tables etc..
There is no specific reason behind why scripts are client dep[endent and smartforms are client independent!!!
As for SAP -- Scripts are called client dependent because if you create client in say,200 it would be available in that only.If you want to test the script in client 300 then it won't be there,you will have to go to transaction se71 in 300 .Then Utilities-> Copy from client.Give the source as 200 & form name(i.e. script name) & copy.
Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s.SAPscript forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
MANDT is the field which differenciates the table from Client Dependent and Client Independent Tables.
All the Scripts are Client Dependent Objects
Smart Forms, Function Modules are Client Independent Objects.

Client dependent n client independent?????????/

hi this is vinod,
please explain the concept behind of script client dependent and smartforms r client independent pleaseee its urgent????????????

Hi,
Client dependent Means if you create that data in one client is limited to that client only and it is not accessable in other clients
Like SAP SCRIPTS and STD texts data
where as Client Independent means the data if you create in one client that is available in that as well as in other clients
Like SMARTFORMS, All dictionary Objects data and Repository objects data like Programs, Fun modules, tables etc..
There is no specific reason behind why scripts are client dep[endent and smartforms are client independent!!!
As for SAP -- Scripts are called client dependent because if you create client in say,200 it would be available in that only.If you want to test the script in client 300 then it won't be there,you will have to go to transaction se71 in 300 .Then Utilities-> Copy from client.Give the source as 200 & form name(i.e. script name) & copy.
Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s.SAPscript forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
rewards if useful,
regards,
nazeer

Difference between client dependent table and client independent table

hi all,
i m new in sap pls tell me the difference between client dependent table and client independent table.
tell me in detail.
thanks and regards
vikas saini

HI
Client dependent Means if you create that data in one client is limited to that client only and it is not accessable in other clients
Like SAP SCRIPTS and STD texts data
where as Client Independent means the data if you create in one client that is available in that as well as in other clients
Like SMARTFORMS, All dictionary Objects data and Repository objects data like Programs, Fun modules, tables etc..
There is no specific reason behind why scripts are client dep[endent and smartforms are client independent!!!
As for SAP -- Scripts are called client dependent because if you create client in say,200 it would be available in that only.If you want to test the script in client 300 then it won't be there,you will have to go to transaction se71 in 300 .Then Utilities-> Copy from client.Give the source as 200 & form name(i.e. script name) & copy.
Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s.SAPscript forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
What is client dependent and Client Independent
https://www.sdn.sap.com/irj/sdn/forums

Client dependent vs client independent

Hi,
CASE-1 :
there are two clients using one Application
Server .
q1) Are scripts and smartforms client-dependent/independent.
CASE-2 :
There are two clients using different Application Servers
q1) Are scripts and smartforms client-dependent/independent.
if smartforms are client independent so why am not able to see it
from dev to qat without trasporting smartform.
as we know smart forms are client independent so under what condition i can see my smartforms in another client without transporting to other client.
please help me out.

Scripts are always client dependant and Smart forms are
client independant.
You will be able to see your smartforms in all the clients in the same application server.
For examples in DEV system there might be three clients
100, 300, 500. So you will be able to see ur smartforms in
all the three clients.
But in order to see SapScripts you will have to transport the form from each client to another.
To see the smartform in you QA server which is a different appplication serer you will have to transport objects.
Regards,
Sudhir Atluru
Reward points for helpfull answers

Why sapscripts are client dependent & smart forms are client independent?

why sapscripts are client dependent & smart forms are client independent?

You developed the script in development client , you can't find the same in testing client even though the server is same.
Where are You developed the smartform in development client , you can find the same in testing client even though the server is same.
Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s,
while Smart Forms have only been around since (roughly) 2001. With that sort of time gap,
there are bound to be significant differences between the two tools. As you have noted correctly, client dependence is a fundamental one.
Although SAPscript has had some incremental improvements over time,
its forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic.
These forms were designed to be driven and controlled by ABAP programs,
much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP),
and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
Conversely, a Smart Form is significantly more robust and complex. For instance, it can contain program nodes and nested tables with patterns. When a Smart Form is compiled, it generates an ABAP function module and these are always client-independent. This is appropriate, given that this form has more in common with an ABAP program than its predecessor. For instance, when a print program calls a Smart Form, the form itself takes over to produce output, without any further direction from the print program. In fact, the join is so seamless that I often find myself using a Smart Form's Initialization section for logic to handle any data gathering not handled by the print program. I would never even think to attempt this with SAPscript.
Several factors figured into SAP's decision to make Smart Forms client-independent, including customer feedback. There are significant advantages to client-independence. For instance, a change made in one development client happens immediately across all development clients. Among other things, this means we don't have to waste time figuring which client contains the most recent version -- they all do! In addition, transporting Smart Forms is easier, since we can safely bundle them together in the same transport as their client-independent print programs (no worry about mixing client-dependent and independent objects).
Check the beloe links for more information
script and smart forms
http://www.sap-img.com/smartforms/smartform-sapscripts.htm

Validations(TCode GGB0) are client dependent how to move from one client t

Hi All,
I have done chabges in Validation set (Requirement from FICO Functional). As Validations are client dependent. I done the changes in 200 client now Functional want me to do these in 100 client. So Will SCC1 TCode will wrok in this case ? Or there is any other method to transport from one client to other.
Thanks..

Dear friend .
SCC1 works finely in this case. You have To create request and move it to development And for production transport this request..
regards
Ajit

Why SAP Script are Client Dependent, Smartforms are client-independent.

why SAP Script are Client Dependent,Smartforms are client-independent.
Edited by: Srinivasa Reddy Ariga on Oct 27, 2008 12:28 PM
Edited by: Srinivasa Reddy Ariga on Oct 27, 2008 12:49 PM

Before you do anything else, read this: Welcome and Rules of Engagement
Google is your friend. Try keywords smartforms client dependent Next time - search first and ask second.
oh, and it helps to get the correct forum...

Client dependent and client independent in ALE

I am going through pdf learning of an ALE scenario,i couldnot get wat is meant by client Independent and client dependent.
How can i conclude
Create message type (WE81){color:green} Client independent {color}
To create a new message type, follow these next few steps:
u2022 Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
u2022 Choose Create logical message type by double clicking on it
u2022 Click on change icon to enter change mode
u2022 Click on New entries to add a new type
u2022 Enter the required message type, in our case it is ZINVRV and an appropriate description
u2022 Save and exit.
Your message type has now been created. The next step will be to link it to the IDoc.
2.2.1. Link message to IDoc type (WE82 & BD69) {color:green} Client independent {color}
To link the message type to the IDoc type follow these next few steps:
u2022 Enter transaction WE82 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> EDI: Message Types and Assignment to IDoc Types)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
u2022 Enter transaction BD69 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Assign message type to IDoc for ALE)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
Your IDoc is now linked to your message type. We still need to link object types and add the message to the model before we can use the message.
2.2.2. Maintain object type for message type (BD59) Client independent
The ALE objects are used to create links between IDocs and applications objects, to control the serialisation, to filter messages in the customer model and to use listings.
For our own message type and IDoc you must maintain object types for the links.
If you want to check the serialisation for the message type, then you must maintain object types for the serialisation. If no serialisation object has been maintained for a given message type, then the serialisation will not be checked for this message type.
To add an object type to our message type, follow these next few steps:
u2022 Enter transaction BD59 (ALE -> Extensions -> ALE object maintenance -> Maintain object types)
DOC NAME: ALE_SCENARIO_DEVELOPMENT_PROCEDURE
Version 1 Page 6 of 16
ALE Scenario Development Guide
u2022 Type in your message type ZINVRV and press enter
u2022 Click on New entries
u2022 Enter your object type, LIFNR (We need to use the vendor as a filter object), the segment name where LIFNR resides, Z1INVRV, a number 1 for the sequence followed by the actual field name LIFNR
u2022 Save and exit.
You have now created an object that weu2019ll use as a filter object in the customer model to direct the flow of messages to the various logical systems based on the vendors in the filter of the message type ZINVRV.
We now need to add our new message type to the distribution model.
2.3. Configuring the Distribution Model
This task is performed on your ALE reference client.
2.3.1. Manual Configuration (BD64) {color:green} Client dependent {color}
To manually configure the customer distribution model, read the ALE configuration procedure, and follow these steps:
u2022 Perform the Maintain customer distribution model directly function. (ALE -> Distribution customer model -> Maintain customer distribution model directly)
u2022 Specify the customer model you want to maintain and the logical system that is to be the sender of the messages OR create a new model. (Create model ALE with logical system ALELS1C400)
u2022 Choose the receiving systems to which the sending system must forward message type ZINVRV to.
u2022 For each receiving logical system allocate the message type necessary for communication to the receiving systems as per ALE configuration procedure.
u2022 Create filter objects (in our case LIFNR as the object type with the associated vendor number, 0000018001 with leading zeros, in the object area) for the message types.
u2022 Save the entries.
Refer my query within color:green
Edited by: aditya sharma on Jul 14, 2010 12:57 PM
Edited by: aditya sharma on Jul 14, 2010 1:01 PM

A client is an independent business unit within an R/3 System, Data in the R/3 are classified as cleint-Dependent and client-independent.
Client-independent data such as ABAP Programs, R/3 repository objects throught the entire system. Other data is client-dependent. meaning, it can be viewed from one client. Cleint-dependent data includes customizing application and user data.
Eg.
Scripts are client dependent, means the changes done to SAP scripts in particular client will not be reflected in other client.
Smartforms are client independent, means changes done in one client will be reflected in all the clients.
Server : ECC6
Client : 100 , 200 , 300 , 400
Now suppose you have developed report in DV server client 100.
Then you will be able to see that in all clients.
Hence this is called as client independent. You can change anywhere and changes will be reflected to all ...
Now suppose you have developed a script in DV client 100.
You will not be able to see that in client 200 or 300 or 400 unless ytou copy that from client since it is client dependent.

Client dependant objects in ABAP or SAP

5.What are client dependant objects in ABAP or SAP?

Hi Venu,
Sap Scripts are Client dependent
How do we debug sapscript?
First we need to put Break point in Print program where ever you want to stop the execution.
After in SE71 give your form name and go to Utilities-->Active De-bugger.
Then go to your transcation like VF03(for Invoice or Credit memo) etc to see the print preview or print the form execute it.
When you execute it the the form Debugging will get activated and you can see your Form execution step by step.
Thanks,
Satya
Edited by: SATYA KUMAR AKKARABOYANA on May 30, 2008 12:45 PM

Transport client dependent table and data

Hi,
How do you add a client dependent table and the entries inside to a transport?
Please help.
Thanks,
John
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 4:33 PM

Hi there!!!
go to Txn SE09, create a request type "Workbench Request".
1 . Go to the Sub task, select the 'Objects' Tab.
2. Enter the Program ID - R3TR
                  Object       - TABU
                  Object Name - (Your Required Table Name)
3. Now Press the Function Button on the right, Enter the Table Key, which is nothing but the value of the primary key fields of row to be sent, typed as one.
eq. to send material number 1 from MARA in client 100, following would be the table key:
100000000000000000001
where first 3 characters are for the client
and the remaining 18 characters are for the material number.
Another simple method would be to-
1. execute Txn se16 and display the required Table Contents.
2. Select the rows to be sent, by selecting the check boxes corresponding to those rows, and then selecting the Menu Option
Menu->Table Entry -> Transport Entries.
3. Create a request.
    the enties would be included in the request.
Hope This solves your Problem. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 4:34 PM

Are programs client dependent

Similar Messages

Maybe you are looking for