Are sas db source modules available in owb

I am using OWB 10.1.0.2 and I would like to use SAS as a source module, is there a gateway or plugin for owb that I can use.

I'm not sure. I know there is some way to connect between the two, but do not know details. I suspect a search on something like Google or directly as SAS.com would allow you to find the solution.
I'd suspect that you then would connect to an Oracle schema using this connector in OWB.
Jean-Pierre

Similar Messages

Are there any relay modules available for Compact Fieldpoint, and if not, what are the alternatives?

I'm speccing out a Fieldpoint system, and although Compact Fieldpoint has many features that make it superior to Fieldpoint for my application, I'm wondering why no relay modules seem to be available for it.
The cFP-RLY-420 is referenced in the manual it shares with the FP-RLY-420, and a search in the product section comes up with several pages that aren't viewable, but it doesn't seem to be currently available.
More importantly, if there are no relay modules available at this time, what would be the alternatives for switching? A small Opto22 backplane wired to a DO module perhaps?

Mako,
Several of the more specialized modules in FieldPoint have not yet been released in Compact FieldPoint. However, National Instruments is presently working on releasing most of these traditional FieldPoint module in the future.
Depending on your application, either the cFP-DO-401 or cFP-DO-410 (which are both providing sourcing outputs) may be a possible alternative. The DO-401 module can sustain up to 2 A per channel, 8 A squared per module whereas the DO-410 can sustain up to 1 A per channel. Please note that these modules only handle low voltage DC.
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

What are all the E-Modules available in SAP HR

Hi
Please let me know what are all the e-modules (e-recruitment, e-travel....) available in SAP HR
Thanks
Manian

Hi,
Almost all the Modules of SAP HR has Web Applications. We have ESS/MSS applications for Personnel Administration, Personnel Management, Travel, Training And Event Management (LSO), Time Management & Recruitment.
Regards,
Suba

What are the different 'Add-on modules' available with LabVIEW?

What are the different 'Add-on modules' available with LabVIEW?
What are the types of 'Add-on Cards'?
Cards and modules are different,thats true.Is it that modules means software and are they same as 'add-on toolsets'.Please give the details/URL which would give me various toolsets in detail and also the specifications of various add-on cards?
Kindly do the needful
I require these details immediately.I am an Engg student and learning LabVIEW

duplicate post

There are no traffic sources available to this Database Firewall

Hi, Experts, I want to create " Enforcement Points" in DBforewall. But I get message :"There are no traffic sources available to this Database Firewall, You will not be able to use the system in its current state. Please install more network interfaces and reinstall the Database Firewall software. "
I have two netwotk cards. one is for DBFW access, one is for capture network trafic. Any one can help me?
#ifconfig
eth0 Link encap:Ethernet HWaddr 00:1F:16:2D:77:9D
inet addr:10.182.?.? Bcast:10.182.207.255 Mask:255.255.254.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20991 errors:0 dropped:0 overruns:0 frame:0
TX packets:8187 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2706212 (2.5 MiB) TX bytes:6313332 (6.0 MiB)
Memory:f2600000-f2620000
eth1 Link encap:Ethernet HWaddr 00:1B:8C:25:19:3B
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:150859 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25953197 (24.7 MiB) TX bytes:0 (0.0 b)
Interrupt:122
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8863 errors:0 dropped:0 overruns:0 frame:0
TX packets:8863 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6188256 (5.9 MiB) TX bytes:6188256 (5.9 MiB)

I think the problem is that as the error message says, you don't have enough network interfaces available.
The installation process creates a network bridge and therefore you need 3 network interfaces: eth0 ist for management access, eth1 and eth2 are the ports for the bridge (an IP will not be assigned for these two interfaces) and at last the br0 interface. When you don't provide enough interfaces during the installation process, the bridge will not be configured and this could be the problem.

Problem with Creation of Source module for MS Access

I am having a problem in creating a source module connected with an "MS Access" file in OWB 9i using the heterogeneous services. I have created a DSN to an access file (.mdb) and created the HS in Oracle (modified the tsnames.ora and listener.ora files with required details). Created a Database link using this service and it's working fine in SQL PLUS, but I am unable to create a Source module in OWB 9i using this db link, since OWB 9i need a schema name for db link. In MS access it's not possible to have a schema.
Please help me in solving the above issue.
Thanks in advance
Jagan

What version of OWB and Oracle database are you using? If it is an OWB version 9.0.4 or higher, I presume you are trying to create a non Oracle source module under the Oracle Database node - is this the case? If yes, you should not do that, but create your MS Access module under Databases->Other->Other node (as I understand you are not using ODBC). Let me know if my assumptions are correct.
Regards:
Igor

Changing a source module to a new database?

Hi there, looking for help from the users here! I'm on OWB 10.2 This should be a simple one, but I'm having a hard time!
The short summary of my question, is how do I change my mappings in my target db to pull from a new source module / database?
Here's the longer description:
In design center I have 2 different locations ("loc x prod_old" and "loc y prod_new"). I currently have a source module callled "m_src" that currently uses "loc x prod_old". So all views, etc, in "m_src" are currently being pulled from "loc x prod_old".
Now I want to change the "m_src" modeule from "loc x prod_old" to "loc x prod_new", and then I want to make sure all of my mappings in my "m_tgt" module which have objects in "m_src" get pulled from the "loc x prod_new".
On "m_src" module I change data location to "loc x prod_new" and also change metadata location to "loc x prod_new". Then I configure "m_src" and make sure the dropdowns point to "loc x prod_new" as well. Save. So far so good. In "m_src" I can now verify by selecting a view and looking at the "data" for the view.
I can also now select a mapping in my "m_tgt" module and when I generate the code I can see that it will use "loc y prod_new" instead of "loc x prod_old", which is correct.
When I go to control center, and run the mapping, the mapping is still using the "loc x prod_old", which is not what I want. It seems that I have to re-deploy each mapping. When I go to the db and look at the mapping using toad I can see the mapping still points to the "loc x prod_old". Only when I re-deploy the mapping does it use "loc x prod_new."
Surely there must be a way that I can change my location or my source module and get my mappings to use the new location, without having to re-deploy each and every mapping. How can I best do this?
Thanks!

I guess I should have waited another day before posting (unfortunately time is critical now). I figured this out and am closing the thread.
design center > location > edit it, pointing to new db
design center > go verify the data on a view
control center > target module > connector > drop / replace
in a sql tool you can now verify your dblink points to the new db

What are all Built-in-Templets available in ODI?

What is the use of Built-in-Templets?
What are all Built-in-Templets available in ODI?

Hi Harmeet,
ODI's biggest asset is Knowledge module.This is the built in templates of ODI.
Knowledge Modules (KMs) are code templates. Each KM is dedicated to an individual task in the overall data integration process.
There are almost 6 types of KMs coming with ODI.
Reverse-engineering knowledge modules (RKM) are used for reading the table and other object metadata from source databases.
Journalizing knowledge modules (JKM) record the new and changed data within either a single table or view or a consistent set of tables or views.
Loading knowledge modules (LKM) are used for efficient extraction of data from source databases and include database-specific bulk unload utilities where available.
Check knowledge modules (CKM) Checks data integrity against CONSTRAINTS defined on a Datastore. Rejects invalid records in the error table created dynamically.
Integration knowledge modules (IKM) are used for efficiently transforming data from staging area to the target tables, generating the optimized native SQL for the given database.
Service knowledge modules (SKM) provide the ability to expose data as Web services.
You can see the list of KMs in your installation folder /impexp directory.
Thanks,
Guru

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CRVS2010 Beta - Error: No valid Report Source is available

I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
            myReportDocument.Load("C:\Reports\stoppages.rpt")
            myReportDocument.SetDataSource(myDS)
            Session.Add("Report", myReportDocument)
            crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AM

Hi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM

After configuring DMZ unable Supplier login to Sourcing modules

After configuring DMZ unable Supplier login to Sourcing modules
You have encountered an unexpected error. Please contact the System Administrator for assistance.
Regards,
Amit Chowrasia

mikey.askdbaonline wrote:
Anybody face this issue earlier we are also getting error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: SSL call to NZ function nzos_Handshake failed with error 29014 (server test.com:4443, client 192.168.1.22)
[Wed Jan 16 07:28:08 2013] [error] mod_ossl: Unknown error
Regards,
Amit ChowrasiaWhat is your application release? What version of JRE you are running?
Is SSL enabled?
Is the issue with one module only?
What document did you follow to implement DMZ?
Can you find any errors in access_log file (assuming the above from error_log file)?
Can you find any errors in the application.log file and/or in the database log file?
Thanks,
Hussein

Service Check Data Source Module Events

Hello,
I seem to keep having this alert the event number is 11771, i could really use some help here on how to fix this issue if possible.... these errors are being generated from SCE BY SCE
Thanks,
Danny
Date and Time:
2/4/2010 5:19:14 AM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Collect Service Check Data Source Module Events
Event Number:
11771
Level:
Warning
Logging Computer:
sce01.xxxxxx.com
User:
N/A
Description:
Error getting state of service
Error: 0x8007007b
Details: The filename, directory name, or volume label syntax is incorrect.
One or more workflows were affected by this.
Workflow name: Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor
Instance name: ESSENTIALS
Instance ID: {023CAC69-7B83-207A-5F48-D808815B4919}
Management group: SCE01_MG
Event Data:
View Event Data
< DataItem type =" System.XmlData " time =" 2010-02-04T05:19:14.0140371-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor </ Data >
< Data > ESSENTIALS </ Data >
< Data > {023CAC69-7B83-207A-5F48-D808815B4919} </ Data >
< Data > 0x8007007b </ Data >
< Data > The filename, directory name, or volume label syntax is incorrect. </ Data >
</ EventData >
</ DataItem >

also here's this weeks critical errors from SCE by SCE
Date and Time: 2/24/2010 9:55:44 AM
Log Name: Application
Source: Windows Server Update Services
Event Number: 13002
Level: 1
Logging Computer: sce01.xxxxxxxxxx.com
User: N/A
Description:
Client computers are installing updates with a higher than 25 percent failure rate. This is not normal.
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T09:55:44.1666165-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > Client computers are installing updates with a higher than 25 percent failure rate. This is not normal. </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 4:25:43 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : Login timeout expired Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T16:25:54.2642632-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > Login timeout expired </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:47:13 AM
Log Name: Operations Manager
Source: Health Service Script
Event Number: 4001
Level: 1
Logging Computer: sce01.xxxxxxxxxxxxxxx.com
User: N/A
Description:
GetSQL2008BlockingSPIDs.vbs : Cannot login to database [sce01.xxxxxxxxxxxxxxx.com][ESSENTIALS:master] .
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:15.8121021-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > GetSQL2008BlockingSPIDs.vbs </ Data >
< Data > Cannot login to database [sce01.xxxxxxxxxxxxx.com][ESSENTIALS:master] . </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:46:05 AM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:14.1579111-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 3:50:12 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 31400
Level: 1
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
An exception occured processing a group membership rule. The rule will be unloaded. Subscription ID: 1ac6ba80-bb85-4699-82a2-f3c584b06965 Rule ID: bb91657f-32db-4f72-2ed6-e7ac94f0e167 Group ID: b20e0f37-c8d3-afcc-e21e-473b019fd826 Group type name: Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group Exception: Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection)
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T15:50:12.2844774-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > 1ac6ba80-bb85-4699-82a2-f3c584b06965 </ Data >
< Data > bb91657f-32db-4f72-2ed6-e7ac94f0e167 </ Data >
< Data > b20e0f37-c8d3-afcc-e21e-473b019fd826 </ Data >
< Data > Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group </ Data >
< Data > Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection) </ Data >
</ EventData >
</ DataItem >

How to change the source module version

Hi All,
In the OWB i created a source module and during those steps i clicked on version 10.1, but during deployment in the deployment managaer when i tried to register the location, its giving me an error as "Source verison 10.1 is not matching with the target version 10.2", can any one please help me or Advice me as to how to change the "source module version"?
Thanks

Hi
what i understood is that the source module is associate with the location and you have provided the 10.1 which you need to change.
so you can change that under location.
Cheers
Nawneet

Alert subscription data source module encountered errors while running

Hello All,
After I configured subscriptions with many monitors, error alerts appear at SCOM(scom 2012 r2) console in active alert page.
I googled it and found some topics at TechNet but I could not figure it out. Alert description is shown below
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: The incoming request has too many parameters. The server supports a maximum of 2100 parameters. Reduce the number of parameters and resend the request.
One or more workflows were affected by this.
Workflow name: Subscriptioneaa7b044_b3c1_4198_be71_ffaaf66a163f
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: STS
Any idea?
Thanks

As I understand, this issue occurs and remains after I configure a subscription with too many rules and/or monitors( i.e al available rule and/or monitor of a management pack).
After I had deleted those subscription with many rule/monitor, this issue was resolved.
Any idea?

Visual Studio 2012 - Source Not Available After Pressing Pause While Debugging

Hi,
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location of the dialog in the code and the call stack would show the series of calls to arrive
at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
At first we thought it was a symbol issue since none of the Windows-related dlls had pdbs. None of our workstations are connected to the Internet so I used symchk to download all the required symbols. Despite all of the symbols now being loaded, the
debugger still doesn't show the actual call stack into our code.
Is there a setting somewhere that needs to be set? Or are we out of luck since our machines are never online?
Any thoughts are apprecated.
Thanks.
Visual Studio Premium 2012 (11.0.60610.01 Update 3)

Hi,
Welcome to MSDN.
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location
of the dialog in the code and the call stack would show the series of calls to arrive at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The
call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
According to these words above, do you mean clicking “Break All” as following image?
The error means that our project does not contain source code for the code that we are trying to view, you could refer to
this link for more information.
In order to solve this issue, you could debug it in another machine which can download symbols form Symbol Servers, then copy that
symbols to your machine to test.
You could change the Symbols setting of the Visual Studio of the other machine as following image:
Then copy the symbols in that directory to your machine, and change the Symbols settings to your local directory to test.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Are sas db source modules available in owb

Similar Messages

Maybe you are looking for