Are sending box and receiving box IDOC same?

my sending client is Box1, receiving client is Box2, every month, we send GL balance from box1 to box2 thrugh IDOC
I compare WE82, WE30, SM59, WE20, all setting are same in BOX1 and Box2. I doubt this, in SM59, we only maintain RFC connection to Box2 in both Box1 and Box2.
Are the above correct? under what circustance, we should maintain different configuration in box1 and box2 for GL balance transmission?

Hi anand,
in we 19 when you send the idoc, the sender port refers to the port used by R3 to send the idoc and the reciver port is the port used by XI to recive the idocs.
If you are going to use the same sender and receiver port, then where is your idoc being sent from r3 back to r3??
Regards,
Bhavesh

Similar Messages

  • Deleted messages from in box and sent box do not appear in trash

    For years deleted messages from my in box and sent box appeared in the trash where I would hold them for a week or two just in case I had to retrieve a message I had deleted. About 6 months ago deleted messages stopped showing up in the trash. What do I do to get deleted messages to once again appear in the trash? I'm no computer geek... please be gentle with any suggestions. Thank You.
    Ron Mabey

    While trying to find a solution, I am discovering my mail problem is much deeper than just messages not appearing in the "Sent" mailbox.  I have found some of them appearing in the "Trash" mailbox and some appearing there mulitple times, often with my account name in the "TO" field.  I'm also finding some unread mail there that should be in the "Junk" mailbox.  So it would appear there are many problems with ISO 7 and mail.  I have tried deleting and restablishing the account and two complete iPhone restores.  Neither helped. What is the biggest puzzle is that on my second iPhone, the one that upgraded without an error, mail is working perfectly well.  Has anyone found a solution to any mail problems on ISO 7 devices?  If so, please reply.  

  • Creating List box and check box in structure

    Hi
    I have to include List box(Drop down) of lenght 20 and check box in a screen area.
    The fields on screen are to be transported from structure CI_PROJ in table PROJ.
    How can i Include List box and check box in my structure CI_PROJ.
    Also wat data type is required

    Hi,
             For the list box if you have the data element along with the search help then you can use that dataelement. If you dont have search help at dataelement level then for the structure you have to assign a search help directly. If you dont have data element it self then domain's fixed values will be shown in the drop down. For the check box you have to use a data element with a domain having CHAR and length 1.
    For the list box you will KEY and VALUES. Key is the one that is transfered to your program data and VALUE is the one that is shown to the user. You have to use the data element of your KEY for the list box.
    Regards,
    Sesh

  • Sender DEBIT and receiver DEBIT

    Dear all,
    I notice in settlement, there are 2 button : sender and receiver. Now, what confused me is why both also called sender debit and receiver debit?
    Why both also DEBIT?
    Please advise me.
    Thanks

    Dear All,
    I see mostly it is like that where sender debit and receiver debit. If you go into KO88 previous settlement, you will get this.
    I read in forum also it is explaining in debit.
    You assign the debit cost element groups to a settlement cost element.
    You settle by cost element - that is, the debit cost element is the settlement cost element.
    so i would like to know why the title is sender debit and receiver debit. why both debit.
    thanks

  • Send Task and Receive Task

    In our beta test, we came upon several issues, one of them is when we create a BPMN process that consists of the following simple flow: Start -> User Task 1 -> Send Task -> User Task 2 -> Receive Task -> User Task 3 -> End
    When we deploy and run the flow, it always stops at the Receive Task. But when we remove User Task 2 from the flow and redeploy and run, the process runs fine all the way to the end. I am wondering if this is a bug in BPM 11g where if you put an activity between Send Task and Receive Task, it does not work, but when you do not have a task between Send Task and Receive Task, it works fine. Can someone confirm this scenario please?
    Within the Send Task and Receive Task, we are invoking a BPEL process that has a simple asynchronous service. The Send Task invokes the BPEL process, and the Receive Task has the callback to the BPEL process.
    Makes sense?
    Thanks.

    What does the bpel process do? Does it work with a synchronous bpel process?
    I think you should submit an SR for this since it works when there is no activity between the send/receive.
    Heidi.

  • TS4268 My text messages are being sent and received with my email address instead of my phone number. How do I fix this?

    My text messages are being sent and received with my email address instead of my phone number. How do I fix this?

    This is with iMessages only.
    Go to Settings > Messages > Send & Receive and below the Start New Conversations From, select your cell phone number instead of your Apple ID email address.

  • Removing Music Box and Video Box Queue from Safari Window tab

    Hi,
    I  had  earlier  installed  two  applications  :  Music  Box  and  Video  Box.
    Since  I  don't  use  them  often  I  removed  them  from  my  Macbook.
    But  after  removing  these  applications,  I  noticed  two  of  these  Annoying  options
    on  Safari > Window  tab  (toolbar).
    Any  ideas  of  removing  them ?  Altough  they  don't  affect  my  system;  it  really  isn't  nice  to  see  them
    there  as  the  applications  itself  is  gone.
    Thanks.

    Did those applications come with an uninstaller? If so, did you use it to uninstall the apps?
    If you did, please let the developer know that their uninstaller didn't work.
    If they didn't provide an uninstaller, send a nasty-gram asking them to please do in the future.
    I'm not familiar with those programs and don't know where something might install in order to alter the app like that except the Safari Extensions which you can access from the Safari Preferences.

  • Removing Music Box and Video Box Queue from Safari (Window) toolbar

    Hi,
    I  had   installed  two  applications  :  Music  Box  and  Video  Box.
    Since  I  don't  use  them  often  I  removed  them  (uninstalled)  from  my  Macbook.
    But  after  removing  these  applications,  I  noticed  two  of  two  options
    on  Safari > Window  tab  (toolbar)  called  Musicbox  Queue  and  Videobox  Queue.
    Any  ideas  of  removing  them ?  Altough  they  don't  affect  my  system;  it  really  isn't  nice  to  see  them
    there  as  the  applications  itself  is  gone.
    Thanks.

    Did those applications come with an uninstaller? If so, did you use it to uninstall the apps?
    If you did, please let the developer know that their uninstaller didn't work.
    If they didn't provide an uninstaller, send a nasty-gram asking them to please do in the future.
    I'm not familiar with those programs and don't know where something might install in order to alter the app like that except the Safari Extensions which you can access from the Safari Preferences.

  • I need an application that will enable my ipad to receive calls, make calls , send sms and receive sms. line2 is not available in south africa

    i need an application that will enable my ipad to receive calls, make calls send sms and receive sms. line2 is not available in south africa

    Skype would be a possibility for phone calls, though I don't know if it's available in SA. Search the iTunes Store for "SMS" and you'll quickly see if there are any SMS apps you can try.
    Regards.

  • PI 7.1 Sender Interface and Receiver Interface  gets interchanged

    Hi All,
    I m facing a strange problem in PI 7.1
    For many of my scenarios, the Sender Interface, sender namespace and receiver Interface, receiver namespace  information gets interchanged and displayed incorrectly.
    But sometimes its working fine.
    When we analysed the Log messages, found that, after xml validation step, the sender and reciever interface gets interchanged.
    Any idea why this happens?
    How to rectify this error?

    Aarthi,
    Please check your message interfaces once again. Sender is outbound and Receiver is inbound.
    Also please check your receiver determination.
    Regards,
    ---Satish

  • I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

    I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

    Highlite the text inside the text box and then press Ctrl+E.

  • Regarding Sender query and receiver query

    Hi Masters
          I have one sender query and receiver query. Both queries contain G/L account.
    First I got sender query report, in this report I drill down one free charactteristics field to get correponding field sales document in receiver report.
    Is it mandatory which field i drill down in sender report should be in receiver report?
    Could you please help ?
    Thanks in Advance
    Raja.S

    I would rewrite the first one to:
    Select t.id_entity,t.id_trade_ref,p.am_stock
    from trade t,posting p
    where t.id_trade_ref = '5V973781B'
    and p.id_trade_ref = t.id_trade_ref
    This way, you really make the join between the table.
    I think the join is better because it uses less code. I do not think you will notice much performance win between one or the other, especially because it concerns only a few rows.

  • Sender and receiver on the same server

    Good morning!
    We plan a TDTIM for 2 different SIDs but with their Oracle DBs on the same server (NOT MCOD).
    If we use them as the sender and receiver respectively, any concern about the performance?
    Any other concerns?
    We know that TDMS within the same SID but different clients is NOT recommended.
    Our TDMS server is on a seperated box.
    Thanks for sharing your experience.

    As the hardware resources will be shared, you need to make sure -
    > the box has optimum resources to handle large data transfer volume.
    > the system and DB parameters are set correctly. There is a note to suggest these setting for high volume data transfer.
    > avoid two data intensive steps to run in parallel, for example do not run receiver deletion and data selection in parallel.

  • IDOC Sender Adapter and Receiver Adapter

    Hi,
    Why we don't require IDOC Sender Adapter to communicate with PI and why IDOC Receiver Adapter is required to communicate with SAP ?
    Regards,
    J Augastine

    Hi,
    >>>Why we don't require IDOC Sender Adapter to communicate with PI
    you're talking about sender and receiver agreements right ?
    as this adapter is based on abap stack - with new functionalities of IDOC adapter
    require sender agreement
    >>>and why IDOC Receiver Adapter is required to communicate with SAP ?
    as we need to put the RFC to the destination system somewhere...
    Regards,
    Michal Krawczyk

  • How can we send and receive voice in same program

    Please can any one suggest me how to send and receive voice in the same program. I want both AVTransmit & AVReceive in the same program i tried it but its too difficult to do it.. Any one has got that code? And also i want my program to know if any third person is wanting to call me.. I mean how to recognise a new call. Please relpy to the following mail id.. Please i need it urgently..
    [email protected]

    Sir please execute this code.
    printf("I need it ");
    for(i=0;i<=infinity;i++)
    printf("V E R Y ");
    printf("U r g e n t");
    Now Please Send it to me sir.Please..Does not compile!

Maybe you are looking for