Are the bugged badges for the iOS Reminders app a known issue?

I've seen quite a few posts covering many years on this issue, and it seems to have gone ignored by Apple.
The issue is badges not showing up for the Reminders app, even though they are turned on in the Notifications Center. It does not seem to be that they are simply broken, because if you change the priority of a reminder, or physically go in and "Snooze" a reminder, then it seems to force the app to pull up a badge.
I'm not totally sure what I expect out of another discussion, since most of the ones I have found ended with "yep, it's broken", but if you happen to know of a fix, or have heard that maybe Apple is aware of it... I'd love to hear it!
Thanks!

AdamGM4 wrote:
Meg, Apple is obviously reading these boards to some degree. Regardless, it's sad that this has been an issue for this many years.
The Hosts read posts if they are notified by users about possible Terms of Use violations. Customer Support Specialists read (and answer) a specific subset of posts that have gone unanswered for 24-48 hours. The posts they answer are ones that can be easily answered by a reference to a knowledge base article. They do not read and answer posts about whether or not they know about your particular problem. Sometimes the Hosts read posts that are brought to their attention by senior forum members who notify them through a restricted area of the forums.

Similar Messages

HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
Bob G

HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig

What are the new features for the latest version ...

what are the new features for the latest version of N6300? can you cite me the newest features?

The latest update was just bug fixes and improved stability, no new features. That is nearly always the case with series 40 phones like the 6300.
Nokia do not make the changelogs available publicly but often they do appear on unofficial sites. Searching google may provide you with more detailed info that cannot be posted here.

HT4993 on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

Not a good idead to share IDs
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Read Sharing an Apple ID with your Family
Does your father have a recent backup of his phone? If so restore his phone from that. Please not that everythign created on th ephone since the backup was made will be lost

"you are opening application "xyz" for the first time are you sure you want

When working in Tiger or Panther if I click on a document eg: word, illustrator, photoshop, indesign. and the application that is supposed to open this document is not open already. You get a warning message. that says "you are opening application "xyz" for the first time are you sure you want to open it. " Even though this is not the first time the application has been launched. However if you launch the application from the applications folder or from the dock the warning does not appear.
How do you disable this warning or at least correctly inform the OS that the application has been opened before.application
This happens from clean installs and those that have their launch services database cleared the link from document to application survives a logout but not a restart. I know it is a security feature and not a bug but it would be nice to know where this cache/.plist is and why it is suffering from amnesia.
Textedit does not exhibit this behavior across installs but any other app does I get the warning whether it is a user with a l

Michael,
This could be related to the Side effects of System cache cleaning.
;~)

HOW TO STOP you are opening this program for the first time

I continue to get the warning "you are opening this program for the first time". I don't want that warning to ever appear again for any program. How to permanently get this warning to never again appear?
Best regards,
Steve Schulte
Wednesday 21 November 2012

Thomas,
The reason I don't want these warnings (especially for programs that I have had on my Mac for years!) is because I now use ecamm's "Printopia" to send items from my iPad3 running iOS 6.0.1 to my MacBook Pro-13 (mid-2010) running Mountain Lion 10.8.2 -- and in order to do this:
1. Both my iPad and Mac have to be on the same WiFi network.
2. The Mac has to be awake, cannot be in the "sleep" mode
OK but in order to wake my Mac, I've found that using the app "Remote" on my iPad to open iTunes AND PLAY A SONG will "waken" my Mac*.
So now, for example, I send a .jpg file to my Mac. I have it set so that GraphicConverter opens when a .jpg file is to be opened. OK but if this warning appears (and even though I have had GraphicConverter on the Mac since the beginning of time…) I sometimes (like today) get this warning. Of course I am not at my Mac and yet when I eventually go to my Mac-- there is that dialog box sitting there and until I click OK the photo doesn't open (and on my iPad I don't get a confirmation that it has been sent, because it hasn't until I click OK on the Mac).
This could happen for other types of files, too - text files or Word documents etc.
It seems to happen when I UPDATE a program, like when GC went from 8.3 to 8.3.1 for example.
Thanks for any additional comments.
*Perhaps there is a better / faster / easier way to "waken" my Mac from my iPad? This is the only way I have found so far…

Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist

lawlist wrote:
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist
FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum.

Does anyone know how to do a text search in the new Safari for iPad iOS 7?

Does anyone know how to do a text search in the new Safari for iPad iOS 7?

The feature has been removed to make safari even less useable. You need to download a third party browser like atomic web browser to get the functionality you want back.
Like many new IOS 7 "features", safari on the ipad is a FAIL.
At least you can now bury safari in a folder containing hundreds of icons that you can only view 9 at a time.

I am trying to connect a printer but when the pc searches for the drivers/software it says there are none for this version of lion? 10.8 I have downloaded drivers for the 10.7 version but still cannot get it to accept any ideas?

I have a xerox phaser printer which I want to connect to my mac book but each time it says there is no software to support the version of lion I have!
I have downloaded the software for the 10.7 but that hasnt helped... any ideas?? thanks

You will have to try the xerox website for the latest drivers for Mac OX system you are using
http://www.support.xerox.com/support/engb.html
It may be that your printer is not supported. You do not specify which model you have so unable to help further.

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

How to rotate a text in the adobe reader for mobile ios ?

how to rotate a text in the adobe reader for mobile ios ?

There's no rotate command to rotate the document. Instead, rotate the iPad. If it doesn't rotate, turn off the Rotation Lock switch on the side of your iPad.

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What are the default values for the NetStream.multicast***** properties

I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.

the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
   var ns:NetStream = new NetStream(netConnection, groupSpecification);
   ns.multicastWindowDuration = 10; // change default for everybody
   ns.publish("mystream");
   ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

Are the bugged badges for the iOS Reminders app a known issue?

Similar Messages

Maybe you are looking for