Are the  Datasources in the source system Client independent?

Hello Experts!
I am new to the productive implementation of BW. I have this silly question. I wish to connect a productive CRM system to BW 3.5.  Do i need to do the customizations for activating the datasources in a developement client and then transfer to the productive client (or) can i directly activate the cotent datasources in a productive client. I mean which way is  the better.
Thanking you.
With regards
Ashwin

Hi Ashwin,
I would like to know some more info about the scenario. Do you mean you have development and production in two different clients in one system? If no, you need to transport the activated data sources from your dev to your prod system.
If yes (what is really not recommended) you need to be careful. When you activate datasources they are normally cross client. So you could simply activate your datasources in your dev client and use them in the prod client. There are some exceptions, where datasources are generated and transported but they are only few.
Best regards
   Dirk

Similar Messages

  • What are the sources system will pick the document type while creating invo

    hi
    I would like to know how system will pickup the doucment type while creating invoice in vf01.
    i have taken off the fields  f1, f2, from the document type. in billing sub tab.  so  The moment when am creating billing system automatically displaying F2 invoice doucment creation.  What are the sources for this.
    thanks & Regards
    Rack129

    Hi,
    Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
    If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
    Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
    Regards,
    K Bharathi

  • Regarding the Source systems

    Hi,
    Can anyone plz let me know what are the source systems that provide various master data....
    and their Versions also...
    For eg: Customer master -- CRM systems
    Thanks & Regards
    Guna

    Hi Guna,
    I not understood the background of the question however some of source systems with their masters...
    SRM - Suppliers (Vendors)
    CRM - Customers
    ECC or R/3 - All  (HCM - Employees, MM - Materials ....)
    BI - All
    Retail - Products
    Legacy - Anything !
    + An

  • CLIENT of the source system in the Transfer Rules

    Hi,
    Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
    I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
    I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
    If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
    If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
    Thanks in advance for your help.
    Regards,
    Melwyn

    hi,
    i think if your bw dev and prod client is different you can try in transfer rules
    if sy-mandt = xxx. ( bw dev client number)
       result = 'yyy'. (source system dev)
    else.
       result = 'zzz'. (source system prod)
    endif.
    or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
    or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
    hope this helps.

  • How to change the Source system from ONE DataSource?

    Hi,
    I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to  do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
    Thanks for your help

    Hi Marcel,
    As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
    In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
    Regards,
    Durgesh.

  • How to change the source system for just a datasource

    Hi,
    Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
    During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
    'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
    Any idea about how to proceed ?
    Regards,
    Joan

    Hi,
    If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
    Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
    Any idea about how to proceed ?
    Regards,
    Joan

  • DataSource 0HR_ATT is not defined in the source system

    Hi Gurus,
    When I am trying load data for HR Master data Attribute it is not loading any anything. I checked that datasource in Rsa3 at R/3 side there it is showing
    "DataSource 0HR_xx_attr is not defined in the source system", can anybody give me the solution.
    I will assign full points.
    Thanks in advance.

    Hi Sergio,
    I have replicated the datasource in BW. Still It is showing the same.
    Kindly advice.
    Maruthi

  • DataSource 2LIS_11_VAHDR is not defined in the source system

    I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
    Then I am using RSA3 I receive the following error
    DataSource 2LIS_11_VAHDR is not defined in the source system
    I tried to activate this data source several times in ERP Dev and send it to production without any success

    I am sure you would have done these steps, but just a double-check.
    1. RSA5 - Install the data source
    2. RSA6 - Activate the data source
    Check in LBWE if the data source is available.
    All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
    Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
    Further to the above, do a check in Dev for the following.
    After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
    And check the data in RSA3.

  • Extraction Problem - DataSource is not defined in the source system

    Hi,
    I am loading transaction data into sales cubes, while loading in process chain it shows "No Data"
    so when i go in rsa3 extration for checking availibilty of data.
    The following message shows,
    DataSource 2LIS_12_VCHDR is not defined in the source system.
    In LBWE first it was shown Inactive then i make it active.
    So, what is the procedure to defined this data source to the source system.
    Thanks & Reagards,
    SD.

    Hi All,
    Thanks for ur reply.
    But i can not found the datasource in RSA5, can anyone explain how to find the datasource in RSA5?
    Datasource name : 2LIS_12_VCHDR , Cube Name : 0SD_C03
    and how to activate in RSA5 ? & after activation how can migrate the same datasource in r3 side by replication?
    Also the procedure to fill up the setup tables and then do the loading from r3side by thorugh infopackage...
    Thanks & Regards,
    SD

  • DataSource 0HR_PA_PA_1 is not defined in the source system

    Hi All,
    DataSource 0HR_PA_PA_1 is not defined in the source system Error is coming when I am trying to activate the datasource in source system (In RSA5-Data source is not available in source system)in order to pull data to HeadCount InfoCube in SAP Hr module.
    Can anybody please help me in this regards.
    I searched in sdn but no luck.
    Thanks
    Mohan

    HI Mohan,
    0HR_PA_PA_1 is a datamart datasource , It will be available in the BI system and not in the HR system
    The extractor takes the data from the master data tables in the BW system. (check SAP note 336229 )
    Check the SAP help
    http://help.sap.com/saphelp_nw70/helpdata/en/29/02b43947f80c74e10000000a114084/frameset.htm
    Regards,
    Sathya

  • Deleting the Source System

    Hi All,
    Can Anyone the consequences on deleting the source system in BI and steps to re-build once again, as i need to take up the activity. Generally what can be issues that crop up when deletion takes place..
    <removed by moderator>
    Regards,
    Madhav
    Edited by: Siegfried Szameitat on Dec 12, 2008 11:28 AM

    Dear Linturi,
    believe you trying to delete the current R/3 source system and trying for SAP BI my self source system right?
    If yes
    We can very well dete the source system
    The impact would be in th efollowing ways
    You will loose entire datasources,transfer rules and PSA related to that particular source system and it will be Major impcat on you Bi system which is not at all preferable untill unless you are really no more use of the R/3 source system and its configured with any of the bi pass clients.
    Coming to BI Myself souce system : Which is purely realted to the DATA MART Loadings and its also a similar like R/3 source system connection you have to give ALEREMOTE passwords and serve ips.
    Hope this helps u...
    Best Regards,
    VVenkat..

  • Changing the source system in QA

    Hello All,
    I just wanted a quick opinion from your experience on the following issue:
    We  have a ECC Dev client 20 connected to BI Dev client 20
    Similarly we have ECC QA 120 connected to BI QA 120
    But due to some reason we now want to connect a new ECC QA client 150 to BI QA 120 and take out ECC QA 120 totally(120 is wiped off).
    I already have a lot of development transported to BI QA where the source system is ECC 120. Now if 120 dies and we pull the data from 150, what are the pitfalls to watch for?
    Like all my Master data objects , DSO and Cubes still point to ECC QA client 120 but now the "actual" source system is going to be ECC QA 150.
    Points,
    Gaurav

    You need to replicate all the data sources in BI from QA 150 and change the source system assignment to 150 instead of 120.
    Also, you need to reinitilase delta for delta enabled extractors.
    Two  things to watch out:
    1.  If you dont have source system identifier,  then if you happen to get records with same key, then it will overwrite. This applies to both master and transaction data.
    2. For transaction data that is not delta enables, there may be a possibiltiy with which the records will get duplicated. So, better to delete the old requests before reload the data from QA150.
    Ravi Thothadri

  • Data Source Z*** is not defined in the source system

    Hello All,
    I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
    I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
    I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
    I tried to locate the data source through RSA5 and I cannot see that it is availble there.
    Can you please help and advise where the problem is?

    Hi Neb,
    It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
    Datasource xxx is not defined in the source system
    It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
    Regards
    Sunny

  • Error occurred in the source system

    Hi,
    I am receiving the below error while loading data from APO system
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    ******On further investigating the error message I get the following Diagnosis and Resolution details.*****
    Diagnosis
        The sequence for creating time series in LiveCache is:
        1.  Characteristic value combinations are created which in turn create
            planning object in the system
        2.  The combination of version, planning area, and planning object is
            initialized, creating time series  in LiveCache. This combination is
            so to speak the LiveCache anchor.
        This error occurs if
        o   New characteristic value combinatons have been created for the
            master palnning object structure that is assigned to the planning
            area, but the time series objects were not created.
    System response
         Processing cannot continue.
    Procedure
         There are two methods of creating time series objects for individual
         characteristic value combinations:
             a)  Re-initialize the version without deleting the time series
                 objects beforehand.
             b)  Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
         In general SAP recommend that when you generate new characteristic value
         combinations, you set the Create time series objects indicator.  This
         prevents this error from occurring.
    Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
    Regards,
    Tyson

    Hi tyson,
    Has it run good before? if yes, try to restore the source system.
    by right click on the source system then choose restore.
    It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
    hope it help. Give point if you see its helpful.
    Chuong Hoang

  • Error Infosource is not defined in the source system

    I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
    I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
    I even created a new DataSource and infosource but still the error persists. please help me in this matter.
    Thanks

    the data is extracted from BW system itself (Self System).
    there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
    the source system is the same bw system.
    The detailed error report is -
    InfoSource  is not defined in the source system.
    Message no. R3005 
    Diagnosis
    The InfoSource  specified in the data request, is not defined in the source system.
    System response
    The data transfer is terminated.
    Procedure
    In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

Maybe you are looking for

  • Enhance resolution

    how do i enhance the resolution for better print quality. its a small picture that i want to print out poster size.

  • Bridge is acting strange not showing files

    Well I started the computer today and started bridge. When bridge opened the files I was working on the day before did not appear. I looked in a few other recent folders and the problem was not wide spread but was still present in 50% of all the fold

  • How to create WAR file in eclipse?

    Hello everybody, M using eclipse. m facing problem to create WAR file.i dont know how to create it. m using -cvf command for it. Let me know how to create from eclipse IDE.

  • SAP WM-Stock Placement Strategy "P"

    Hi Gurus While using stock palcement strategy "P" "by storage  Unit Type" we are dividing bins to  section like Stoarge Type  Section   No of itms  231                 A               3                 1       2     3 is this code need to append to t

  • Cropping bug: part of image goes black

    A strange problem which cropped up after installing 3.2, and remains after re-installing 3.2. When I go to crop a vertical image, the top 1/3 of the image goes black.  I can still select what I want (guessing for the border in the black part) and, wh