Are the Frame or JFrame objects not supported when used by applets??????
Hi,
Is there anyone to help me ?
I've an applet which uses Frame objects. With the "appletViewer" executable the results are
perfect.
But Netsacape Communicator seems not to support Frames..?!? Is this possible?????
Thanks
deniz
Oh..Thanks for the replies.
But the reason was that I was still using Netscape Communicator 4.5.
With Netscape Communicator 6.1 installed yesterday; everything is
normal. i.e. I can observe the frames that applet creates... :-))
Similar Messages
-
I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610 using Adobe Acrobat Pro 11. I recently purchased the printer. I believe I ame using all of the defaults. How can I correct the problem?
Hi,
Both printer and computer seem to be on same network.
Please download and run the following utility to troubleshoot on the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
Also download and install the firmware update from the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
"charging is not supported" when using the cable that came with ipod
I get an error message that "charging is not supported" when plugged in using the only cable that came with my ipod touch. My ipod will charge for 5 minutes then when I check on it, I notice this error on screen and the ipod has stopped charging. I'm using the same charging method I have always used since I owned this ipod which has been over 2 years now and this only started happening recently. I believe this started when I upgraded to 5.0.1.
- Look at both partsof the 30 pin dock connector. Log for bent. mising or corroded contacts of orther abnormalities. The cable could be bad. Try a new one.
- Try a reset. Nothings is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
I lost an xcel doc a couple of days ago. Tried to find the Library folder in Users but not there when I use Finder (even when I do shift-command-G). But when trying to upload a photo in iphoto I found the library folder in Users. I can see my doc in Office 2011 Autorecovery, but can't access it! How do I get User to show Library then I can get to my long lost document?
The auto recovery dat should be in the Microsoft User Data folder in your documents folder, not in the Library. However, I Haven't had to look recently.
-
"Deep data objects not supported" when writing into a file
Hello everybody,
I am having some issues about a program that i made which puts the content of any table in a file that i created.
The problem is when my table (transparent table) has a deep data type in it (example : a string field, so with undefined length).
Here is my code :
DATA : lt_gentable TYPE REF TO data.
DATA : ls_gentable TYPE REF TO data.
FIELD-SYMBOLS : <ft_lines> TYPE STANDARD TABLE.
FIELD-SYMBOLS : <fs_line> TYPE ANY.
CREATE DATA lt_gentable TYPE TABLE OF (p_tab).
CREATE DATA ls_gentable TYPE (p_tab).
"creation of links
ASSIGN ls_gentable->* TO <fs_line>.
ASSIGN lt_gentable->* TO <ft_lines>.
DATA : l_fname TYPE char80.
CONCATENATE '\dir\dir2\' l_fname_log INTO l_fname.
OPEN DATASET l_fname FOR OUTPUT IN BINARY MODE.
OPEN CURSOR WITH HOLD l_c FOR SELECT * FROM (p_tab).
DO.
FETCH NEXT CURSOR l_c INTO TABLE <ft_lines> PACKAGE SIZE p_size.
IF sy-subrc = 0.
LOOP AT <ft_lines> INTO <fs_line>.
TRANSFER <fs_line> TO l_fname. <=====> GOES INTO DUMP BECAUSE MY TABLE (p_tab) has a string field
ENDLOOP.
CLEAR <ft_lines>.
ELSE.
CLOSE CURSOR l_c.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET l_fname.
Here is the message i am getting :
At the statement
"TRANSFER f TO ..."
no deep data objects are supported at the a
for strings.
Elementary deep data types are internal tabl
data object) references and strings (STRING,
General deep data objects are elementary dee
that contain deep data objects.
In this particular case, the operand "f" has
internal identification "v".
List of internal ABAP types:
C Text (Character)
N Numerical text
D Date (YYYYMMDD)
T Time (HHMMSS)
X Hexadecimal
I Integer
P Packed number
F Floating point number
h Internal table
r Object reference
l Data reference
g String of type C
y String of type X
s 2-byte integer with plus/minus sign
b 1-byte integer without plus/minus sig
u Structure (flat structure)
v Structure (deep structure)
Can you help me to go through this issue ?
Any kind of help would be appreciated.
ChristianSandra is correct I agree with him,
TRANSFER dobj TO dset [LENGTH len]
[NO END OF LINE].
dobj must be character-type . Use String.
Please read the F1 help for the TRANSFER Statement and also please check the example
In your case assign the <fs> to Casting File asfollows
DATA: file TYPE string VALUE `flights.dat`,
wa TYPE spfli.
FIELD-SYMBOLS TYPE x.
ASSIGN wa TO CASTING.
TRANSFER TO file.
Hope this helps... -
AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
IanThis may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/ -
I put a Tesco sim (02 carrier) in 2 unlocked phones, Both phones are now locked to 02, 02 blame apple, I connect the iphone to itunes and it states that the new carrier (orange) is not supported, Isk this of both 02 and apple, who's phone is this and what right do you have to lock a previously unlocked phone? very angry
Where did you get these phones?
These and other forums are full of people with iPhone unlocking problems - the net result is that, as others have said, is:
If you bought them from Apple they will be (and stay) unlocked.
If you bought them PAYG from CPW then they will lock to the first SIM activated.
Any other contract or PAYG phone iPhone bought from the networks WILL be locked by them too.
However, all is not lost. The original purchaser can request for the phones to be unlocked by Apple, via the carrier. The carriers usually charge around £20 to do this, or gratis if you're out of contract.
You are the original purchaser, right? If not, you need to get in touch with that person and pray they'll help you out. -
The files are on a volume that does not support Trash- Mountain Lion CC-Lr5
I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD. I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it? Thank you
Hello,
This reply is months late, but hopefully it'll help you or someone else searching with this problem. I was having the same problem and found a way to get rid of it (permanently, it seems so far). The diagram below shows the steps I took in detail.
Note: This seems to especially be a problem if your photo files on the same disk as a Mac OS installation or bootable backup.
Hope this helps: -
Suddenly I've started getting the error "The files are on a volume that does not support Trash. Would you like to permanently delete the item?.
iMAC OSX 10.9.4.
LR 5.6,
Camara Raw 8.6
Any idea?
Please Help Me...
Thanks in advance
JoseThis is how I solved it, thanks to combined information posted on forums:
1. Got a new external hard drive formatted for Mac (I was using read-only Windows from my PC)
2. Created a folder in new external drive >imported to LR->send to trash- empty trash
3. The above was still not working until I noticed one day magically the missing picture icon started to show up in LR
4. I went to the "set as rejected"pictures> locate missing pic (and nearby ones)
5. Selected the pics -photo>remove> delete from disk
Done!!!
Thanks to the hours spent on searching different threads, and to the relentless users because LR never provided any kind of support or formal response to solve this by just letting users to getting lost in frustration . -
Is there anyway to find a new font on Pages for iPad? The letters are hard like a rock when you use foreign languages like Thai. The fonts on device do not support foreign language.
varat_pond wrote:
Anyone in Apple if you see this message
These are user to user help forums. To tell Apple you want more fonts for Thai, go here:
http://www.apple.com/feedback/ipad.html
But I suspect this is likely one of those things for which you will always have to use a full computer rather than a iPad. -
Fix for "The version of the server you are trying to connect to is not supported."
Like many of you, I experienced the following problem with Lion:
"The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem."
I googled and found a workaround for that. It worked for me, maybe worth a try:
http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
KoosSame problem here, and the above fixes do not work. I'm running 10.7.5, and the defaults write commands do not appear to work: the plist reverts to its default state after each connection attempt.
I can confirm that the correct values are entered in the plist immediately after performing the defauts write commands (while logged in as root) described in those links, by opening the plist file in xcode. But regardless of rebooting or not, the file immediately reverts to its default values as soon as an afp connection is made. Extremely frustrating. The "defaults write" simply doesn't stick.
I desperately need to pull some data off of a Mac IIci that is running Shareway IP under System 7.5.5. This always worked seamlessly in 10.4 though 10.6: I really need a working solution for 10.7. Thanks for any help... -
Problem "The version of the server you are trying to connect to is not supported."
Hi,
I connected a portable hard drive to my Airport Extreme. I can see the hard drive in Airport Utility / Disks but I'm getting an error when I try to connect this disk from Finder / Network / Airport Extreme. I googled and didn't find a solution.
How can I connect the portable disk from Yosemite?
There was a problem connecting to the server “Airport Extreme”.
The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem.First image
Second image -
MetaData operations are not supported when
Dear Experts
I am facing below error when trying to run my add-on in Windows Server 2008 R2 and SQL Server 2008 service pack 2.
Error: MetaData operations are not supported when a user transaction is active
It runs fine in Sql Server 2005.
Kindly tell me a solution to sort this out.
Regards
ShibinCan we see your code, it looks to me like the error is quite descriptive - its saying you can't do any metadata operation (creating/updating user fields, user tables using userfieldsMD or usertablesMD objects) while in a transaction.
Previous SDK examples have shown that you can do it, but they it is not possible - it may be that SQL 2008 has a tighter control over this. (Did you also do a B1 upgrade, or just change SQL version?)
Are you running a transaction? -
What are the common errors we get in supporting project
can any body reply what are the common errors we get in supporting project
for abapers tickets will get or not.
what type of tickets generally get regarding reports.<b>SAP Tickets</b> are nothing but problems or issues raised by the end
customer in a company where end users are running SAP project.
Once the SAP project is implemented, support phase begins. Support
team is responsible for solving the tickets/issues in day-to-day
business.
For any support project, customer will set up Help Desk. If any
problem occurs customer will call Help Desk and register the
issue/Ticket.
Different companies use different software products to manage SAP
Tickets. Remember this software is not provided by SAP. It is third
party software. There are many software products in the market like
Manage Now et c. You can call these software products as tools.
All tools will provide the common attributes which are listed below-
1) Every user will be provided with user name and password to enter
into the tool
2) We can see the tickets assigned for a particular user name.
3) You can list all open tickets by giving the Date Range
4) You can list all closed tickets by giving the Date Range
5) You can list out all the open tickets assigned for an User
6) You can list out all the closed tickets assigned for an User
7) You can see the description of the Ticket, by entering the Ticket
Number. You can see who had raised the Ticket, what is the problem.
What is the severity of the Ticket?
There are lot many other attributes like you can transfer the Ticket
to another user etc.
<b>What is the severity of the problem Ticket?</b>
When a Ticket is raised, it will be given severity. There are
following severities. It may vary from company to company.
Severity 1
Severity 2
Severity 3
Severity 4
The severity will be decided based on the business critical impacts.
If there is large impact on the business it
will be given 1 severity, if it is having least impact then it will be given 4.
Severity 1 problem tickets should be solved in 8 hours.
Severity 2 problem ticket should be solved in 16 hours.
Severity 3 problem ticket should be solved in 15 working days.
Severity 4 problem ticket should be solved in 30 working days.
Again the no of days may vary from one company to another.
All these things will be decided when giving the contract to the IT
company. The agreement is called as "SLA".
SLA stands for Service Level Agreement.
What happens if a particular ticket is not solved by the IT company
according to the SLA/Contract?
The Customer imposes fine on IT company as per the contract/SLA.
<b>Errors in Extraction</b>
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any
infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light
error message:
Master data/text of characteristic ZCUSTSAL already deleted
1)extraction job aborted in r3
2) request couldnt be activated because theres another request in the
psa with a smaller sid
3) repeat of last delta not possible
4) datasource not replicated
5) datasource/transfer structure not active
<b>Issues faced during the implementation :</b>
1. Slippage of milestones
2. Incorrect or wrong design
3. Reporting format problems
4. Data not matching or reconciling problems
5. Issues discovered during testing leading to redesign
6. Performance issues
7. Requirements misinterpretation
9)check the data same in source system and target system ( i mean
suppose u are extarcting from r/3 after loading check ur data r/3 and
bw same or not.
10)that is abap code, i didnt understand ur question properly.
11)
12) generic extarction, if ur businees contect satisfy ur requirement
u go for generic, suppose u need data from different tables go generic
with view with 1:1 relation 1:M relation for function module.
13)v3 update back groud job is in lo
14)its superior info object, u can find this in master data tab .
15)
16)tuning we will go for improve query performance (compression,
aggregates, partation, index, rollup, precalculated web tneplates.)
17) rsa7(check with some one)
18)bw statics for find data base time and olap time and frontend
time(based on u can improve query performance create like aggra comp ,
indices etc..)
19) direct chain only one chain , meta chain if u have more than one chains
load errors u can solve manually, other than load errors u can wait
right click and repeat.
20)
21) u cn cteate other cube and traansfer, but data space waste.(bec
structures will be deffi)
22) u mean data source enhancement.or not(let me know)
23)rsap0001( for customer exit variables) 001 for transaction data 001
attributes, 003 text 004 hierchies.
24)web application design , its like same bex, but report will execute
in browser.
25)
26) arrangement of process are called process type and we can use
varient and start process for back ground jobs.
<b>Don't forget to asign points</b>
regards
ravish -
I am trying to connect to a Odata Data feed from Excel 2013 Power Pivot
The datasource is in sharepoint site eg: https://sitename/Shared%20Documents/datafeed.atomsvc
getting below error
Error message:
Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported.
============================
Call Stack:
============================
at Microsoft.Data.DataFeedClient.DataFeedODataReader.ValidatePayloadKind(ODataPayloadKind payloadKind, ODataMessageReader odataMessageReader)
at Microsoft.Data.DataFeedClient.DataFeedODataReader.InterceptODataException(Action action)
at Microsoft.Data.DataFeedClient.DataFeedODataReader..ctor(IODataResponseMessage responseMessage, Int64 maxReceivedMessageSize)
at Microsoft.Data.DataFeedClient.DataFeedODataReader.CreateReader(IWebResponse webResponse, Int64 maxReceivedMessageSize, Boolean applySlashUpdatingBaseUriResolver)
at Microsoft.Data.DataFeedClient.ODataHelper.GetCollectionsFromServiceDocumentUrl(Uri serviceDocumentUrl, DataFeedConnection connection)
at Microsoft.Data.DataFeedClient.DataFeedConnection.Open()
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
Appreciate suggestions/answers
NOTE: The error is showing only while using Excel 2013 powerpivot
its working good with Excel 2010 powerpivotAnita,
Please look into using Power Query to use OData as a source in Power Pivot.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!
Maybe you are looking for
-
Dynamic Calculation of SLED for Outbound Delivery
All, I have a situation to pick batches at the time of outbound delivery using batch determination. We have a situation where we have some materials which are expiration date managed and some which are not. I have set up the batch search strategy wit
-
I have a new hard drive and my iPhone 4 needs to sync
my hard drive was replaced. I need to get my old apps back on my hard drive and how do I do this? . How do I sync with my new drive, . my iPhone has a lot of my information I need. How do I sync with my new drive and not lose my information that is v
-
We are currently running version 11.0.0. Is there a summary of the changes between 11.0.0 and 11.1.0.2? We are pondering whether to upgrade and are looking for specifics that have changed in the newest version. thx. [email protected]
-
Mountain lion on partitioned drive
if i put mountain lion on a separate partition can i run programs from the snow leopard partition when i boot up in mountain lion
-
Hello, I'm having a lot trouble understanding how to configure the iMS 6.2 MTA to do my will. I've read the MTA sections in the Messaging Server Administration Guide and still it seems that when I try to implement a rewrite rule, it doesn't work the