Are the K7T Turbo2 and MS-6330 V5 the same MoBo
Please some one help!!!!!!!!!!!!!!!
I have a motherboard and on the motherboard the text say MS-6330 V5 and all i can find on msi homepage is a K7T Turbo2 MS-6330 v5 so is my mobo a k7t turbo2 ???????
i am lost............ ?(
i flashed my bios at my own risk with the newest bios for k7t turbo2 and it works well as hell so my thought is that my ms-6330 v5 really are a k7t turbo2 am i right ??
Hmm, I think 'MS-6330 V5' is the same as 'MS-6330 v5'... :D
So go on and buy your new cpu.
Similar Messages
-
How do i get my contacts to sync so they are the same on my computer, Iphone and Icloud?
from over the years I had a lot of information in my address book that was not relevent anymore, was incorrect or incomplete or a dupluicate. I went through all of them on my mac computer and updated all of the information. As soon as I pluged my iphone in to sync it I ended up with more duplicates, some contacts on my phone not on my computer and vise versa. I checked Icloud to make sure that one was ok but it is different from both my computer and my phone. Now I have 3 different versions of my contacts. How do I sync all three so they are the same so I can start cleaning it up again? Does i matter where I make the changes (phone, computer or cloud)? After I clean everthing up again how do I make sure that the most current and correct contacts are in all three places? Please help it making me a bit crazy at the moment.
That's your problem. You must have 10.7.5 or later installed to have iCloud. Upgrade your computer:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
My iphone / mac no longer recognize they are the same Itunes library. When I try to sync my phone now, it wants to erase everything and replace it with the computers itunes library. I have purchased items on the phone I don't want to erase them from the phone. The phone backs up fine, but won't sync.
File>Devices>Transfer Purchases from "iPhone" and then sync.
-
I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks
If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
I have an Apple TV . My husband has an I-pad 2 and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind for minutes. We checked settings and both I-pads are the same. What can one do to use the I-Pad 2 without any mirroring lag. Thank you All in advance.
try restarting
both ipad http://support.apple.com/kb/ht1430
and atv
restarting ios devices cure 80% of all troubles users have -
I have two Apple accounts the one on my I phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by passed I have tried to change the mini i pad account details to be the same as my computer and original apple i.d.account however, it will not allow me to do I have tried to reset the mini i pad but not all the way to factory otherwise I would loose all my data. I have visited a genuis bench at Fountain gate however, they tell me I need to ring apple support which I will do on the next working day.
You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID -
My email password and my verizon account password are the same? Are you SERIOUS?
The other day I did something I never do, actually log into my verizon account. I hate the verizon interface, I'd rather stick pins in my eyes than use it, but every now and then I have to use it to handle a bill. So, of course the password that I remembered setting on it didn't work. So I jumped through the hoops to reset the password, conducted my business, and left the site, hopefully not to return for a year at least.
Lo and behold, the next time I tried to access my email (which I use Thunderbird for, and don't tell me it's not a supported client, it works fine, and no I'm not going to use Verizon's webmail interface), it won't accept my email password. Now, this password HAD always been distinct from my verizon account password. But...telling myself, "Oh no they didn't," I tried using the new password that I'd set for my online account. Surprise! It let me into my email!
Now, this morning, neither the new password nor my old email password are being accepted.
So, I have two questions, apart from the existential "why does Verizon feel the need to torture its customers like this":
1)Are they SERIOUSLY requiring you to have the SAME password for your email AND your My Verizon Account?
2)If, as I hope and pray, the answer to 1 is "hellz no", how can I change just my EMAIL password?
Anticipating a reply of, "No, it's just one password, because we've decided that's MORE secure, and your whole problem is that you're using Thunderbird, because ummmm somehow Thunderbird renders passwords into ancient Greek before it submits them and so it won't work, but of course some dull-normal client like Outlook WILL work, and don't ask me the details because I'm really not very technical, but apparently I'm technical enough to tell you that your client is no good"...Yes, the passwords are the same now. Verizon made a big push a while back to give customers a single login. They merged everyone's accounts, not because it is more secure, but because they think customers will find it easier. No, there is no way to change just your email password.
And no, there is absolutely nothing wrong with using Thunderbird. Many of us have it configured for verizon.net addresses, and it works just fine.
Wish I had a better answer for you...
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having." -
AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.
To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437 -
My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?
I have the same problem. Right now my iPhone 5S shows 3 instances of the computer to which it is connected under Settings » General » iTunes WiFi Sync. I'm having problems connecting and syncing, and this is probably the cause: the phone chooses one of these connections, and it isn't the one that's actually in use. What's probably happening is that the phone and computer establish a connection using a dynamic IP address, the address becomes "disassociated" due to error, another address is associated, the phone retains each address/link, and each link is displayed as if it represents a separate computer (the fact that the name of the computer is identical is ignored, as the only thing that is considered important is the IP address). But that's all conjecture. More important, I'm not sure how to fix the problem. A network reset doesn't do it.
-
*Fix* Usage and Standby Times are the same - iPhone 4S 7.0.4
I'd like to share my experience here because I actually found the solution on here but I'm actually having trouble finding it again.
I had three problems:
1. My standby and usage times were always reporting the same values, thus draining my battery faster than usual. This is not normal behavior; whenever the screen is off it should report standby times, and after the phone is unlocked it is considered usage. They should never be recording in tangent.
2. Whenever I would try to turn off my phone by holding down the power button, the phone would basically restart itself, showing the Apple logo boot screen and then restarting. The only caveat was that it would turn off if it was plugged in and being charged. But take it off the charger and try to replicate it turning off and it would restart.
3. The sound would sometimes think that it was connected to a Dock, so when I went to the Airplay options, they were listed as Dock Connector, Airport Express and Apple TV. There would be no volume slider in the Control Center, and when pressing the volume buttons, there would be no dots, just the bell with a line through it.
Many people might be having genuine battery issues, where you have an older phone and your battery is just really bad and needs to be replaced. My 4S was still under AppleCare in December 2013 and the battery was pretty bad, so I had it replaced in an Apple Store. So for me, the battery life itself was not the problem.
I tried a lot of things to try and fix the above problem but none of them helped. This includes chatting with Apple support (I was surprised they didn't steer me in an obvious direction, considering the large amount of folks who were having these kinds of problems, but they played dumb), restoring fresh and restoring icloud and itunes backups, all kinds of combinations of settings for Mail, iCloud, etc., but nothing worked. I probably restored my phone at least ten times in my troubleshooting efforts. The isolated test of restoring my phone fresh, setting it up to the start screen, making sure the battery was charged 100% and taking it off the charger waiting about 10 minutes. Then I would check standby and usage times.
I had read about fixes for the phone not being able to turn completely off, and it had something to do with cleaning the charging port. I attempted to clean the port with compressed air and other methods, but it never fixed this problem. Then I read a post on Apple Support about a guy who had the exact same problems as I did, then said he changed out his charging port and this fixed it. Well, it was $40 so I paid someone to do it in 45 minutes.
After I got my phone back the problem didn't appeared to be fixed, but after a restore and even with an icloud backup restored with it, I looked down at my phone and presto chango, the times where separate and working as they should. Last night with wifi off while I was sleeping, the battery only went down 3%. I know this is turning out to be a narrative, but I spent a lot of time trying to figure out what the problem was and it was a frustrating process. I'm happy it's resolved.
Apple Support thought it was a corrupt install package from iTunes, or some kind of software glitch or maybe some part of iCloud constantly trying to call home, but it was a combination of both hardware and software. Because of the bad charging port, for some reason the phone thought it was still being used and thus was still treating standby as usage.
I would encourage those that are having this problem to do a test and see if your phone will turn off when you want it to. If it resets automatically and if your standby usage times are the same, replacing the charging port might fix it.Ever since iOS7.0.6. and still on iOS7.1 both me and my wife had huge battery drain on our iPhone 4S and stand-by was equal to usage time. We finally found the solution to a post of another user on the Dutch Tweakers forum. There seem to be a bug within a certain Dutch coupon app called 'Scoupy' which drained the battery completely although GPS setting was turned of and also 'refresh on background' was off.
Scoupy said that a fix for their app is send for approval to the App Store. We removed the app and our usage/stand-by time is again as normal (higher stand-by time then usage time) and best of all a 'normal' battery use as it was the case on iOS7.0.4. I hope this could help someone. I'm wondering if the iBeacon changes in iOS7.0.6/7.1 together with a bug in the Scoupy app could be the cause? Maybe this is also with our similar apps you have on your phone. -
The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?
Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
Any advice gratefully received! -
Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
MerijnRestoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh. -
Single Code Page Unicode conversion when source and target are the same
Hi everyone. We have recently upgraded our non-unicode 4.7 to ECC6 non-unicode. Now we have begun researching the next step to convert to Unicode. I know we could have done the Combined Upgrade and Unicode Conversion but I wanted to do thorough testing after the upgrade to eliminate too many variables if problems arose.
So, my question is...has anyone done the Unicode conversion when source and target servers are the same? Most documentation I've seen recommends a system copy to another box first. I did find one forum thread that gave a high level approach to doing the conversion with just one server and listed this:
Step 1:- Run Tcode SPUMG to scan
Step 2:- Export Database
Step 3:- Drop Database
Step 4:- Create New Database
Step 5:- Import database
Step 6:- Chnage unicode Kernel
What are your thoughts? Is it supported? Am I wasting my time and should I just bite the bullet and buy yet another system? Thanks in advance.
-AnthonyTheoretically that's possible, yes. However...
> Step 5:- Import database
> Step 6:- Chnage unicode Kernel
the import must be done using the Unicode kernel.
So basically you can
- export the old systm
- uninstall system + database
- start as if you were installing "from scratch" on a new box
Markus -
My bf has an iPad and iPhone I'm trying to FaceTime and iMessage his iPad but he only receives it on his iPhone what is the problem. His apple I'd and email for FaceTime are the same on his iPhone.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers, Tom -
Cannot set up iPad since my email and apple id are the same. Help?
I cannot set up my new iPad since the apple ID and the email are the same, any suggestions?
Anything here to help? http://support.apple.com/kb/HE37
Maybe you are looking for
-
Payment advice through E mail or Fax
Dear Gurus, My client wants to send the payment advice generated by the automatic payment program (F110) to his vendors through Email and/or Fax ie at the end of the APP run, the payment advice should be sent through Fax or mail by the system. Pl le
-
I had to re-install Mac OS X version 10.5.8 with the erase and install clean option. Now I do not have iLife on my macbook, the only CD's I have are Mac OS X Install Disc 1 and 2. I understand with the original macbook I had license to use this but n
-
Classic mode of creating Odata services
Hi, Am new to Odata service and was given a requirement to create notification using Odata service. Our system doesnot support SEGW. Please help me with steps how we can create Odata using classes/methods and how we register the service. Please share
-
Edit formula Aggregation rule?
What is the aggregation rule meant in formula tab? What happen if I give aggregation rule in formula tab? Will the aggregation rule in formula tab overwrite the predefined aggregation rule in UI/Repository? If I want to change the aggregation rule on
-
Hi All We have some changes in routines for Storage location retrieval. Which is retrieving wrongly for the blank values of internal Stock transfer. If we do changes, we need to delete the whole one year data..May I know what are the steps need to