Are the sleep button and on/off button the same on ipad?

Are the sleep button and on/off button the same on ipads?

Yes.  This is the same for iPad/iPhone/iPod Touch.  The button on the top edge of the screen is the sleep, power on/off button

Similar Messages

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • Lines on screen, can't reset w home and sleep button at same time

    Lines on screen, can't reset w home and sleep button at same time. Any advise.  4th gen. 32g touch

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • What can't we resize our pictures to fit as our wallpapers on the ios 7 system? nice photos are being zoomed in and cut off and theres no way to fix it, this need to be changes asap! back to the way it was on ios 6

    what can't we resize our pictures to fit as our wallpapers on the ios 7 system? nice photos are being zoomed in and cut off and theres no way to fix it, this need to be changes asap! back to the way it was on ios 6.... FIX FIX FIX!!!!!!!!

    Hello keraalovee,
    Setting Reduce Motion in your Accessibility settings (Settings -> Accessibility -> Reduce Motion) can help alleviate this behavior.
    iOS 7: How to reduce screen motion
    http://support.apple.com/kb/HT5595
    Cheers,
    Allen

  • *Fix* Usage and Standby Times are the same - iPhone 4S 7.0.4

    I'd like to share my experience here because I actually found the solution on here but I'm actually having trouble finding it again.
    I had three problems:
    1. My standby and usage times were always reporting the same values, thus draining my battery faster than usual. This is not normal behavior; whenever the screen is off it should report standby times, and after the phone is unlocked it is considered usage. They should never be recording in tangent.
    2. Whenever I would try to turn off my phone by holding down the power button, the phone would basically restart itself, showing the Apple logo boot screen and then restarting. The only caveat was that it would turn off if it was plugged in and being charged. But take it off the charger and try to replicate it turning off and it would restart.
    3. The sound would sometimes think that it was connected to a Dock, so when I went to the Airplay options, they were listed as Dock Connector, Airport Express and Apple TV. There would be no volume slider in the Control Center, and when pressing the volume buttons, there would be no dots, just the bell with a line through it.
    Many people might be having genuine battery issues, where you have an older phone and your battery is just really bad and needs to be replaced. My 4S was still under AppleCare in December 2013 and the battery was pretty bad, so I had it replaced in an Apple Store. So for me, the battery life itself was not the problem.
    I tried a lot of things to try and fix the above problem but none of them helped. This includes chatting with Apple support (I was surprised they didn't steer me in an obvious direction, considering the large amount of folks who were having these kinds of problems, but they played dumb), restoring fresh and restoring icloud and itunes backups, all kinds of combinations of settings for Mail, iCloud, etc., but nothing worked. I probably restored my phone at least ten times in my troubleshooting efforts. The isolated test of restoring my phone fresh, setting it up to the start screen, making sure the battery was charged 100% and taking it off the charger waiting about 10 minutes. Then I would check standby and usage times.
    I had read about fixes for the phone not being able to turn completely off, and it had something to do with cleaning the charging port. I attempted to clean the port with compressed air and other methods, but it never fixed this problem. Then I read a post on Apple Support about a guy who had the exact same problems as I did, then said he changed out his charging port and this fixed it. Well, it was $40 so I paid someone to do it in 45 minutes.
    After I got my phone back the problem didn't appeared to be fixed, but after a restore and even with an icloud backup restored with it, I looked down at my phone and presto chango, the times where separate and working as they should. Last night with wifi off while I was sleeping, the battery only went down 3%. I know this is turning out to be a narrative, but I spent a lot of time trying to figure out what the problem was and it was a frustrating process. I'm happy it's resolved.
    Apple Support thought it was a corrupt install package from iTunes, or some kind of software glitch or maybe some part of iCloud constantly trying to call home, but it was a combination of both hardware and software. Because of the bad charging port, for some reason the phone thought it was still being used and thus was still treating standby as usage.
    I would encourage those that are having this problem to do a test and see if your phone will turn off when you want it to. If it resets automatically and if your standby usage times are the same, replacing the charging port might fix it.

    Ever since iOS7.0.6. and still on iOS7.1 both me and my wife had huge battery drain on our iPhone 4S and stand-by was equal to usage time. We finally found the solution to a post of another user on the Dutch Tweakers forum. There seem to be a bug within a certain Dutch coupon app called 'Scoupy' which drained the battery completely although GPS setting was turned of and also 'refresh on background' was off.
    Scoupy said that a fix for their app is send for approval to the App Store. We removed the app and our usage/stand-by time is again as normal (higher stand-by time then usage time) and best of all a 'normal' battery use as it was the case on iOS7.0.4. I hope this could help someone. I'm wondering if the iBeacon changes in iOS7.0.6/7.1 together with a bug in the Scoupy app could be the cause? Maybe this is also with our similar apps you have on your phone.

  • Macbook spontaneously goes into sleep mode and screen off mode

    Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
    Any ideas as to how I might rectify the problem? Thanks very much in advance,
    Danny

    When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
    It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
    You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

  • Why must I force quit (double press home and slide off) Mail on both my iPad and iPhone in order to have Mail access on my iMac on the same wifi network. Fetch is set to manual and my ISP is Charter.

    Why must I force quit (double press home and slide off) Mail on both my iPad and iPhone in order to have Mail access on my iMac on the same wifi network. Fetch is set to manual and my ISP is Charter.

    I don't know about the "3" but it's a POP account. I've always suspected that Charter isn't letting go using their mobile apps for iOS. Puzzling that it doesn't block the other way. That is if Mail is open on the iMac it doesn't block access to Mail on either the iPad or iPhone. I'm guessing it's their mobile apps that are the problem but they won't admit it to me.

  • TS4079 Siri is not responding. All settings are the same as my wifes I4s. Her Siri works and my I5 does not.

    Siri is not responding. All settings are the same as my wifes I4s. Her Siri works and my I5 does not.  Any suggestions?

    I just cycled my phone completely off (30 sec) then back on again. It seamed to help, it's working now!!!

  • How do i get my contacts to sync so they are the same on my computer, Iphone and Icloud?

    from over the years I had a lot of information in my address book that was not relevent anymore, was incorrect or incomplete or a dupluicate. I went through all of them on my mac computer and updated all of the information. As soon as I pluged my iphone in to sync it I ended up with more duplicates, some contacts on my phone not on my computer and vise versa. I checked Icloud to make sure that one was ok but it is different from both my computer and my phone. Now I have 3 different versions of my contacts. How do I sync all three so they are the same so I can start cleaning it up again? Does i matter where I make the changes (phone, computer or cloud)? After I clean everthing up again how do I make sure that the most current and correct contacts are in all three places?  Please help it making me a bit crazy at the moment.

    That's  your problem. You must have 10.7.5 or later installed to have iCloud. Upgrade your computer:
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • My iphone / mac no longer recognize they are the same Itunes library.  When I try to sync my phone now, it wants to erase everything and replace it with the computers itunes library.  I have purchased items on the phone I don't want to erase

    My iphone / mac no longer recognize they are the same Itunes library.  When I try to sync my phone now, it wants to erase everything and replace it with the computers itunes library.  I have purchased items on the phone I don't want to erase them from the phone.  The phone backs up fine, but won't sync. 

    File>Devices>Transfer Purchases from "iPhone" and then sync.

  • HT5312 I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

    I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

    If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • I have an Apple TV . My husband has an I-pad 2  and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind  for minutes. We checked settings and both I-pads are the same.

    I have an Apple TV . My husband has an I-pad 2  and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind  for minutes. We checked settings and both I-pads are the same. What can one do to use the I-Pad 2 without any mirroring lag. Thank you All in advance.

    try restarting
    both ipad http://support.apple.com/kb/ht1430
    and atv
    restarting ios devices cure 80% of all troubles users have

  • I have two Apple accounts the one on my phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by

    I have two Apple accounts the one on my I phone and computer are the same the one on my mini i pad is different I have credit on my mini i pad however, when I purchase an App or movie I am charged on my credit card and the $40:00 worth of I Tune cards is by passed I have tried to change the mini i pad account details to be the same as my computer and original apple i.d.account however, it will not allow me to do I have tried to reset the mini  i pad but not all the way to factory otherwise I would loose all my data. I have visited a genuis bench at Fountain gate however, they tell me I need to ring apple support which I will do on the next working day.

    You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
    My Apple ID

  • My email password and my verizon account password are the same? Are you SERIOUS?

    The other day I did something I never do, actually log into my verizon account.  I hate the verizon interface, I'd rather stick pins in my eyes than use it, but every now and then I have to use it to handle a bill.  So, of course the password that I remembered setting on it didn't work.  So I jumped through the hoops to reset the password, conducted my business, and left the site, hopefully not to return for a year at least.
    Lo and behold, the next time I tried to access my email (which I use Thunderbird for, and don't tell me it's not a supported client, it works fine, and no I'm not going to use Verizon's webmail interface), it won't accept my email password.  Now, this password HAD always been distinct from my verizon account password.  But...telling myself, "Oh no they didn't," I tried using the new password that I'd set for my online account.  Surprise!  It let me into my email!
    Now, this morning, neither the new password nor my old email password are being accepted.
    So, I have two questions, apart from the existential "why does Verizon feel the need to torture its customers like this":
    1)Are they SERIOUSLY requiring you to have the SAME password for your email AND your My Verizon Account?
    2)If, as I hope and pray, the answer to 1 is "hellz no", how can I change just my EMAIL password?
    Anticipating a reply of, "No, it's just one password, because we've decided that's MORE secure, and your whole problem is that you're using Thunderbird, because ummmm somehow Thunderbird renders passwords into ancient Greek before it submits them and so it won't work, but of course some dull-normal client like Outlook WILL work, and don't ask me the details because I'm really not very technical, but apparently I'm technical enough to tell you that your client is no good"...

    Yes, the passwords are the same now. Verizon made a big push a while back to give customers a single login. They merged everyone's accounts, not because it is more secure, but because they think customers will find it easier. No, there is no way to change just your email password.
    And no, there is absolutely nothing wrong with using Thunderbird. Many of us have it configured for verizon.net addresses, and it works just fine.
    Wish I had a better answer for you...
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

Maybe you are looking for

  • "The application was unable to start correctly (0x000007b) with borderlands on bootcamp

    Hi ! First, excuse my english : I'm french. I'm trying to run Borderlands (the first, not the 2) on bootcamp with Windows 7 but when I lunch it, I have a textbox wich says : "The application was unable to start correctly (0x000007b)." I have a MacBoo

  • Changing the description of the created referenced Char. in COPA(Urgent!!!)

    Hi Gurus, Can we change the description of the created referenced characteristics in the COPA. Thank You. Points will be rewarded for sure.

  • Broken orion-ejb-jar.dtd?

    I use the Ant task <xmlvalidate> in an EJB project to check the EJB XML deployment descriptors against their DTDs. Checking the (Sun-specified) "ejb-jar.xml" is fine. JDeveloper creates the OC4J specific deployment descriptor "orion-ejb-jar.xml" with

  • Report Completion with basis of completed qty

    Dear All, While closing production order in SAP it converted product cost on the basis of planned quantity where as it should be on the basis of completed quantity. For your reference closed production order attach which convert cost on the basis of

  • I found the answer to my question. Please disrgard.

    I asked whether mySony digital video camera recorder DCR-TRV 11 is a CMOS or a CCD based image sensor. Then I reallized that I might find it in my manual, and I did. This camcorder is a CCD-based image sensor, which means that there won't be a proble