Are the sounds from iPhone suppose to be on iTunes?

are the sounds from iPhone suppose to be on iTunes on my playlist in my phone and computer?

I have the 4 and 5S and other than the finger print reader there's really not much difference in ease of use. In my opinion the finger print reader makes the phone easier, or perhaps I should say nicer to use if you use the passcode lock. Both phones have the same OS version and operate the same way albeit the 5S is faster and smoother. You also get a bit of software eye candy with the 5S thats not on the 4. The camera on the 5S is significantly better than the 4 which I thought was quite good considering its a phone. Or is it a camera with a phone? No matter, there are other small differences but I think you'll appreciate what the 5S has to offer.

Similar Messages

  • HT201269 Will my photos transfer from iphone 4 to 4s if I restore the 4s from iPhone 4 back up on iTunes?

    Will my photos that I took with iPhone 4 transfer from iphone 4 to 4s if I restore the 4s from iPhone 4 back up on iTunes?

    Do a backup of your 4, either to the cloud or your computer, depending on how you usually do this.
    If you backed up your 4 to the computer, connect the new phone to the computer at this point, if you restored it to the cloud, do NOT connect it to the computer (or you might get an old backup by mistake). Just connect it to a charger.
    When you first power up your new phone, it will ask you whether you want do configure it as a new phone or to restore it from a backup.  Select "from a backup".  The prodedure is slightly different for computer and iCloud backups, but you'll be able to figure it out.
    This will restore all your apps, settings, and camera roll.  Then you can either sync it to the computer or redownload your music and movies (depending on how you manage these things). 
    Once this is done, you can delete everything you don't want from the old phone.

  • HT1430 no sound from iphone 4 oheadphones are connected can i hear music nly if or some one talking to me

    no sound from iphone only if headphones are connected can i hear music or some one speaking to me

    Thanks, but I should have clarified:  I already have USB syncing set up with iTunes on my Mac and have been adding music to my iPhone for years that way; now with the latest IOS, it no longer appears to be working.  I follow the exact steps I always have (and which are outlined in the link provided), but no actual music is downloaded to my phone- if I am not connected to a wi-fi network, I cannot listen to my music unless I download it from iCloud.  (And downloading it from iCloud is a laborious task because I have many songs.)

  • Ever since my upgrade to lion 10.7.3, and iCloud, my macbook is running extremely slow. What can I do? It doesn't seem like my contacts are pushing through to the computer from iPhone.

    Ever since my upgrade to lion 10.7.3, and iCloud, my macbook is running extremely slow. What can I do? It doesn't seem like my contacts are pushing through to the computer from iPhone.

    Then your basic issues are: too little RAM, incompatible software, dysfunctional installation.
    Add more RAM or kill as many programs that you use until the computer is running normally.
    See App Compatibility Table - RoaringApps. Upgrade any old software.
    Reinstall OS X:
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • I have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?

    i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco

    You may get a better response in this community:
    https://discussions.apple.com/community/app_store/garageband_for_ios

  • HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

    Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

    - The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
    - What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

  • The sound on iPhone 4s when playing videos is terrible?

    I think Apple need to update iOS 6.1.2 to repair this error, because playing is missed bass and treble. Seriously!!!
    the sound on iPhone 4s when playing videos

    ChristySeattle wrote:
    I am now missing 26 songs from my Iphone. (After resynching it told me 26 songs could not be downloaded and to see Itunes for more info, of course Itunes had no info). So now I am missing 26 songs and cant figure out how to get them back. They play through my laptop and my Ipad but I cant even see them on my Iphone anymore. I'm starting to regret my upgrade to the 4s. Help Apple!
    Were these 26 songs purchased directly from the iPhone?  If so, these might be "ghost" entries ... connect your iPhone to iTunes and click on the small arrow to the left of your iPhone's name. Select the iPhone's "Music" category and see if these 26 phantom songs appear grayed out.  If so, that's probably what the message is about. I have the same problem, although for each of my 9 "ghost" songs on my iPhone I have legitimate entries that play just fine.  I can only see these phantom entries on my iPhone when I view its contents through iTunes (and I get the same error message you get).  Unfortunately, I don't have a solution for the error message, but ...
    If these 26 songs really are in your iTunes library, are they set to be sync'd to your iPhone? (assuming that you auto-sync) In other words, are you either syncing your entire library, or at least a playlist (or genre) that you auto-sync to?  If they're not part of your auto-sync categories, then they won't go back onto your iPhone until you designate them to auto-sync to your device.
    If you manually manage music on your iPhone, can you drag and drop these 26 songs to your iPhone?

  • HT1863 No sound from Iphone 5

    no sound from iphone 5. went throough all the processes that i can think of and still no sound can only hear when i plug in my headphones

    Hello yrxm035
    I would check out the article to check against the steps that you have done. If you are still cannot get it resolved, there is a link in the article for additional support.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Ringer is blank when we raise the sound from left bar

    Hi All,
    When I raise the sound from left side bar, the ringer icon shows as empty, but the same works well with my headphones on.
    Due to this my Music, youtube and other stuff are in mute in speaker mode.Only the incoming calls,messages make sound.
    Please advise what needs to be done.

    Hello, Pugazh Sundar. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend taking a look at.  Try all of the steps in this article and if you are still experiencing the issue, see step 9.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Cheers,
    Jason H.

  • My iPhoto library does not play the sound from videos by my digital camera

    Hello, although the videos from my digital camera used to play sound from the iPhoto library, now they don't. only videos playing sound are the ones from the iPhone.  The digital camera videos, do play sound on media player.  Please help.  Thank you

    As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?
    If the problem persists log into another user account on your Mac, create another test library and test to see if the problem persists there.  Does it?
    Can you export a video from the digital camera to the Desktop as Kind = Original and play it with Quicktime Player?  Does the sound play then?

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How to clear the music from iPhone?

    How to clear the music from iPhone?
    Im tyring to update my music on my iPhone, although my old music is remaining on the device.
    I have tried unselecting the sync music and syncing my iPhone, to remove all the songs - didnt work. I have tried unchecking each of the artists, so that none are checked and syncing - didnt work.
    I dont know what else i can try so that the remaining music is completely removed from my device.

    If all music is not removed from your iPhone when deselecting Sync Music under the Music tab for your iPhone sync preferences with iTunes followed by a sync, something is wrong with your iPhone.
    Under the Summary tab for your iPhone sync preferences with iTunes, try selecting Manually manage music and videos. A warning message will be provided indicating doing so will remove all music - and videos - iTunes movies and tv shows from your iPhone.
    If this works, you can switch back to syncing music.
    If this doesn't work either, try restoring your iPhone with iTunes with Sync Music deselected under the Music tab before doing so.

  • How do I mute the sound from the video camera when burning a DVD

    Hi there.  I'm a new user of Elements 8.  I have compiled some clips and added a soundtrack to the movie,  When you preview the file you don't hear the sound from the video camera but when I burn it to a DVD you still hear the video background.  How do I burn the DVD without the background sound from the video camera?  On the DVD I only want to hear the soundtrack I added.
    Thank you,
    Doug

    Thanks guys.  Both options worked.  Dowside to deleting audio (option I went with) appears to be that you lose the audio forever.  So if I ever wanted to bring the audio back I wouldn't be able to.
    You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
    With using the audio mixer it appeared I had to mute each clip separately.  When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
    The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
    Any way to use the audio mixer to mute the clips in mass?
    See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
    Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
    Hunt

  • Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly. I followed all the advice from the Apple community

    Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly , without using "Actualización de software". I followed all the advice from the Apple community.  Can I use bluetooth speakers to solve this problem?  My Computer: iMac. 20-inch, Early 2008. Processor 2.4 GHz Intel Core 2 Duo.

    You may need to reset PRAM/NVRAM.
    First, check that the jack is clean. Put some alcohol on a plug and insert it a few times. See if that helps.
    is your output both digital and analog? If digital, is the red laser light visible in the socket? Do not look directly into the socket when checking.
    If all else fails try a PRAM reset:
    Reset your computer’s PRAM
    A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    DO NOT HOLD These keys beyond the second startup sound!
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

  • Why the sound from Apple tv2

    Why is the sound from my Apple tv2 so much louder than the sound from the tv/pvr; both are connected with optical cable to the same amplifier.
    GH

    Because the 2 manufacturers of the device have their own ideas of where 0db should be. Does your amplifier offer input trim? if so use it.

Maybe you are looking for