Are the speaker plates used for ventilation?

Hi everyone,
last year I had a disastrous experience with my MacBook Pro: I spilled coffee over the keyboard; my MBP was completely defective, so I had to replace it. I am now trying not to let anything fluid near my computer, but that is sometimes impossible. So I bought a keyboard cover and tightly hold it in place with adhesive tape.
But there are still the speaker plates. Is it possible to again use adhesive tape to cover them completely? Or would that interfere with the ventilation system of the MBP?
Are there other, potentially dangerous, "holes" through which a fluid could enter the MBP?
I would be grateful for any answer!
Best wishes
Jochen

OGELTHORPE wrote:
JochenKai wrote:
I am now trying not to let anything fluid near my computer, but that is sometimes impossible.
How can that be when you have already destroyed one MBP with liquid. This should be a lesson learned on your part. I am astonished.
Unfortunately, I have to sit in front of my MBP the whole day. Then there arises the problem of drinking ... I avoid open beverages (like e.g. coffee) -- so, I have indeed learned a lesson! ;-) But it is sometimes really hard to also avoid closed (bottled) beverages.
I have been given the advice to use a laptop stand, to rise my MBP over sea level. ;-) Do you think that measure would at least reduce my problem?
In any case, thanks for your input!
Best wishes
Jochen

Similar Messages

What are the naming conventions used for aggregates created from Query?

What are the naming conventions used for aggregates created from Query?

Hi Reddy,
As you know aggregates are baby cubes right.
Aggregate names by default system has given as 6 digit number like 100831 but write the description by yourself.
Here you have to remember fact table is created with the name
like for ex: /BIC/F100831.
while creating aggregates you can observe all options carefully till complete the creation process then after I am sure about
your can get idea .
If problem still persists with you let me know the same until
get out of that.
else assign points if this is sufficient.
Thanks,
Ramki

What are the initial classes used for create DBAdapter in JDeveloper

I am trying to create a DBAdapter by JAVA program using JDeveloper API , So want to know initial classes name used to set the Adapter name and Service name in JDeveloper .

HI iansan5653
I am not sure if you are trying to make a widget/extension? for the browser or just customize the appearance of the user. I believe you have to create an appearance and then allow the user to download the appearance to change the styles.
I think you may want this webkit -moz-appearance[[https://developer.mozilla.org/en-US/docs/Web/CSS/-moz-appearance]]
I did some research on this and the MozillaZine is a great reference for all of the Preferences to add stuff to the panels.
Some more information
* [[http://kb.mozillazine.org/Category:Preferences|MozillaZine Category:Preferences]]
* This Menu editor may help [[https://addons.mozilla.org/en-US/firefox/addon/menu-editor/?src=search]]
* UserChrome.css info [[http://kb.mozillazine.org/index.php?title=UserChrome.css&printable=yes]]
* Visual Customizations [[http://kb.mozillazine.org/Category:Visual_customizations_%28Firefox%29]]
*topics [[http://forums.mozillazine.org/viewtopic.php?t=1006795]]
I have also seen extensions made by adding style to these items in the about:config. You could live update the items and see if the css makes changes live in the browser and see how the file renders. [[http://kb.mozillazine.org/About:config_entries#UI.]]
But for better help on this I would recommend asking the mdn
[[https://developer.mozilla.org/en-US/docs/Web/CSS/Reference/Mozilla_Extensions]]
If you can define your set up, the Mozilla Developer Network may be the place for you. Hope this helps.

What are the business scenarios used in plastic industry

Hi Experts,
Could you guys please tell me what are the business scenarios (in sap sd) i should use while implementing in plastic industry (as if someone already worked on implementation project at plastic industry).....
As per my knowledge i would use:
MTS
Batch management
Third party etc....
but in addition to these (if anyone already worked on the implementation project in plastic industry...then what are the business scenario used for......please suggest.....)
If have any idea please suggest........ would be a great help.......
Thank you in advance...........

it depends which part of the value chain you are working at e.g. your company is B2B, supplying ingredients to Plastic industry manufacturer or you sell to wholesellers.
Below are the processes you - may - do in Plastic industry -
- Inter-company stock transfer
- Subcontracting
- Contracts
- QM inspection during delivery process
If you require business scenario descriptions (in brief) for the above processes, then please convey.
Edited by: Typewriter on Jul 11, 2011 11:30 AM

How are the .7z files used and installed for photoshop elements and premier elements?

How are the .7z files used and installed for photoshop elements and premier elements?

Hi,
You can try to extract them to a folder and then try to install using the setup file.
Or you can try to download the .exe file ( Small File ) for the software you have and then run the .exe file and it will start the installation. Both .exe and .7z file for the application should be in same location.
Download Photoshop Elements products | 9, 8, 7
Download Photoshop Elements products | 11, 10
Download Premiere Elements products | 11, 10
Download Premiere Elements products | 9
*** You can either download the .exe file from the above download links or you can also download both .exe (File 2 of 2) and .7z (File 1 of 2) from the above links.

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

I'm going to take a guess and say that if your TV has 2 HDMI ports, it also has a component input (5 wire). I'm also going to guess that either your DirecTv or your Blueray has a component output option. If I had this setup, I would put my DTV on the component option and use the open HDMI port for the ATV2.
I doubt you will be able to tell the difference on your DTV. Most of the stores that demo HD use component wiring on their store models. The only downside is that you may be giving up the highest sound (Dobly 5.1 or whatever they call it.)
Or you could just go to switching the HDMI cords from your BluRay to the ATV2 depending on which one you are watching. I think I use my BluRay about 5% or less of my viewing time. If I "tossed", I wouldn't shed a tear.

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.

Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe uses? Thanks
Bob

I am having trouble when my Edge Animate composition (banner ad) appears on a web page that uses jquery version 1.8.23. Some of the functionality of the host page no longer works. This occurs only when my composition is present & the functionality returns when another ad is displayed (either a Flash ad or a gif). It happens in Chrome Version 31.0.1650.63 m, Chrome Version 33.0.1738.0 canary & IE 11.
I had edited my Edge Animate files to use the Adobe CDN option & to point to another server (mine) so only the html file was needed to be placed in the ad rotator & on the host's server. I now have edited them again to include the Google CDN locations for version jquery 1.10.2 (http://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js). I am waiting for the host site to try this updated html file. When I visit just this new page & the old one that pointed to 1.7.1 for that matter, it works fine.
Thank you for taking the time to read and answer my message.
Bob

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What are the scaling co-efficients for Accelerometer input in Daq-mx ?

hi
im using daq-mx to take accelerometer input.
i want to read the raw data and scale it myslef later.
i want to know what are the scaling co-efficients for the accelerometer input in daq-mx and what is the process of determining them.
thanks.

Rahul,
I've answered your question in another thread you can check using the
following link:
http://forums.ni.com/ni/board/message?board.id=250&message.id=14353
I hope this helps answer your question.
Jason

What are the minimum system requirements for GB 4?

What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
(I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
Click Here
Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

What are the two different rules for organizational data determination

What are the two different rules for organizational data determination???

Hi
1) Rule type Responsibilities
want to determine organizational data for individual responsibilities
have not created an organizational model but want to create one
have a lot of organizational units and must only assign a few attributes
2) Rule type Organizational Model
You would use rule resolution using organizational model if you
have created an organizational model or have distributed a plan to SAP CRM and also want to use this for determining organizational data
assign a lot of attributes to the organizational units and these are to be evaluated
Regards
Manohar

What are the UI components used in oracle adf?

what are the UI components used in oracle adf?

Web.:
- ADF Faces and Trinidad JSF components
http://docs.oracle.com/cd/E28280_01/apirefs.1111/e12419/toc.htm
Desktop:
- MS Excel
http://www.oracle.com/technetwork/developer-tools/adf/overview/index-085534.html
Mobile
- AMX UI Components for Android and iOS
Frank

Are the speaker plates used for ventilation?

Similar Messages

Maybe you are looking for