Are the templates ready for production ?

Hello,
As per the reading of the documentation PeopleSoft_Statement_Of_Direction_May_2011.pdf (MOS note #1320581.1), we can understand Oracle is providing termplates ready to go for production use :
"+...PeopleTools will continue to provide production-ready templates that allow IT staff to get a PeopleSoft system online quickly or to dynamically add or remove PeopleSoft components from a PeopleSoft application...+"
But from the readme documentation delivered in the templates, it sounds an other story (here's the output of the last OVM template) :
"+...This template was built for demo purposes. Out of the box it is not recommended for production use...+"
Not sure how to understand both sentences and if they match somehow.
Nicolas.

Where you find such application?
look to this link [http://jfxstudio.wordpress.com/author/surikov/|http://jfxstudio.wordpress.com/author/surikov/]
JavaFX ready for production.
Edited by: Surikov on Apr 20, 2009 4:17 AM

Similar Messages

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

Is 11G Ready for Production Env.?

Hi,
Our company is planning to upgrade for 11G and we have lots of queries for which i've been in touch with Oracle.
At the same time, i'm gathering users views who are presenly runnning 11g on Production enviornments. I would greatly appreciate your feedback about the 11g database based on your expeirience.
Do you think 11g is ready for production evn. or we should wait for sometime to get it matured, inorder make our productoin enviornment less error prone? Every company has their own way of handling production database and its issues, but a general view would be helpful.
As per my research, 11g is only available for windows & Linux? We were looking for Solaris version for testing, any comments?
Any other comments regarding 11g on production would help?
Thank you
Ratheesh

At the same time, i'm gathering users views who are
presenly runnning 11g on Production enviornments. I
would greatly appreciate your feedback about the 11g
database based on your expeirience. First 11g release was just two months ago, for only one platform (Linux x86 32-bit). How many of the user base, do you think, are early adopters and how many of those have had this new version running for a while in production? From what I've heard from around here, users/customers/vendors are currently moving from 9.2 to 10.2!
Do you think 11g is ready for production evn. or we
should wait for sometime to get it matured, inorder
make our productoin enviornment less error prone?That is your decision to make. You should weigh in the costs/risks for your business, based on the real, defined needs or requirements for migrating to 11g (replacing a major piece of the infrastructure, with complex dependencies, should not be an easy decision).
We were looking for Solaris version for
testing, any comments?Since you haven't even begun testing, it this related to mid-term planning?

Ready for Production ?

I've been going through a number of sample apps developed with JavaFx. They look pretty good but some of them suffer from delays from the time the buttons etc. are pressed to when the response comes through. It's not my computer as I'm running a Quad core with 4GB memory and only one IE browser in the applications + cable connection to internet.
Has anyone else noticed the same problems ?...or different ones which at the 30,000 feet level would discourage one to deploy JavaFx in production today ?
Does anyone know which year/month the next release is coming in off the top of their heads ?

Where you find such application?
look to this link [http://jfxstudio.wordpress.com/author/surikov/|http://jfxstudio.wordpress.com/author/surikov/]
JavaFX ready for production.
Edited by: Surikov on Apr 20, 2009 4:17 AM

IS RUP2 / RUP3 ready for production.

Hi,
i have two R12 instance with RUP2 & RUP3.
is RUP2 & RUP3 full loaded & ready for production.
(or)
RUP2 & RUP3 have bugs.
should i go to RUP4 for safer side.
regards,
Charan

We went live on R12 RUP3 at the end of January, so yes, you can run a production system with RUP3. Of course, since RUP4 is out, and contains fixes not included in RUP3, you are probably better off going to RUP4 for production, assuming you have enough time to test beforehand. :-)
Regards,
John P.

RE: Getting ready for production

Take the Forte Project Management Class. It tell you everything you
need to know
to go live.
ka
From: Julie Muth[SMTP:[email protected]]
Sent: Monday, August 18, 1997 9:39 AM
To: [email protected]
Subject: Getting ready for production
We'll be deploying our first application into production in the near
future and I'ld be interested in any advice you have to offer - horror
stories, successes, what worked, what didn't, what you would do
differently. Also, any advice on the organization and skill set of the
people doing deployments would be appreciated.
Julie Muth
Assistant Project Director
NYS Division of Criminal Justice Services
Albany, NY
[email protected]

Ok... here we go, not sure what you are doing except editing DV right now,
but this will work for HDV, DVCPROHD, Uncompressed SD and some ProRes
as long as you have a good Gigabit Router to transfer files. Please consult
a professional if this sounds scary to you.
*Redundant FILE SERVER* for project files, important stuff
1. Install at least 4GB RAM in G5 #1 (max $200)
3. Make sure there are two identical SATA drives in the G5. Install OSX Leopard Server ($499) on 1 drive. Use Carbon Copy Cloner (Free... http://www.bombich.com/software/ccc.html) and clone
the main drive to SATA drive #2 when drive #1 is set up completely. Use drive #2 as backup.
4. Connect CalDigit 2.56TB HDOne External Hard Drive Array (RAID-5) with PCI-X adapter ($2830)
SubTotal: $3600...ish
*Current MacPro* Add unprotected scratch disk for main edit suite
1. Install Sonnet Tempo SATA e4p Serial ATA Host Adapter ($260)
2. Connect Sonnet 2.5TB Fusion D500P eSATA Array System (RAID-0) ($1700)
Subtotal: $2000...ish
*2nd G5* convert to p2 Logging/backup Station
1. Sony BWU-200S Internal 4x Blu-ray Disc Rewritable Drive (599.95)
2. Roxio Toast ($85)
SubTotal: $700
*NEW Intel MacPro* will increase productivity
1. 8 Core 3ghz Intel MacPro ($3600)
Total: Around 9900-10,000
(Buy from PowerMax.com or other out of state vendor to avoid sales tax)
If you want to organize things, then FCS will help. You can install
on G5#2 for 999.00 more. I would focus on hardware first though.

Can we create a developersite in O365 SP Online programiatically ? what is the template code for it ?

Hi
I am trying to create sites programmatically in O365 SharePoint Online. So, just want to know that can we create a DeveloperSite ?? what is the template code for it viz. Team site- STS#0, etc
If possible provide me the MSDN link where I can refer for available site templates for O365 SP Online sites creation.
Thank you

http://community.office365.com/en-us/f/154/t/61145.aspx
Are you meaning to create sites on SharePoint Online by invoking web services in your own program? SharePoint Online indeed provide some web services for custom programming, however, the web methods for creating a new site seems not included in them. Here
are some resources for the development of SharePoint Online for your reference:
SharePoint Online for developers
http://msdn.microsoft.com/en-us/sharepoint/gg153540.aspx
Code example for SharePoint Online: Accessing Web Services
http://code.msdn.microsoft.com/office/SharePoint-Online-0bdeb2ca
As to create a site collection, the parameter "Template" is the name of the template you want to use, as to find the name of the custom site template, you can use the powershell command "Get-SPOWebTemplate",
it will list all the templates with the names.
Note, The Template and LocaleId parameters must be a valid combination as returned from the Get-SPOWebTemplate cmdlet.
Also check
http://stackoverflow.com/questions/21268629/creating-new-site-collection-in-office-365-from-an-app
If this helped you resolve your issue, please mark it Answered

Where are the epson drivers for Mavericks for the artisan 835

Where are the epson drivers for Mavericks for the artisan 835

OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl-

What are the table names for CRM and APO?

hi friends,
what are the table names for CRM and APO?
Regards
suneel.

hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

Share photos by email - where are the templates ?

Hello, can anyone tell me where in Aperture 3 are the nice looking pre-made templates which exist in iPhoto when sharing photos by email?
Thxs,

I just tried it from Aperture and it works great. All you have to do is select the photos you want to email from within Aperture. Right click, output, email and Mac Mail will open placing the photos you've selected in a new mail dialogue box. Once they are there, just click Stationary (which is in the upper right portion of the new mail dialogue box toolbar. After you click stationary, pick the template that you want, and the photos are automatically dropped into place. If you don't like the template, you can choose another and the photos automatically switch into the new template. If you don't like the arrangement, just drag the images around and they will automatically switch positions. It really couldn't be easier. And remember, you have the ability to control the quality of the image that is sent via the Aperture preferences, export tab. I don't think it matters when you are using templates, but for future reference, you should set this the way you want from the beginning so that the images get sent at the quality you want.
I hope this helps.
Mac
Message was edited by: macorin

Why are the templates not in english? how do i change it

why are the templates not in english? how do i change it

dfields77 wrote:
why are the templates not in english?
To learn about this standard practice for template text, google "lorem ipsum".

What are the config steps for contract hierarchies and vendor hierarchies?

Hi friends
what are the config steps for contract hierarchies and vendor hierarchies?
Regards
Raj Kumar

Contract hierarchies
A function that enables users authorized to create a purchasing contract to define relationships between super- and subordinate contracts.
A contract hierarchy consists of one or multiple contracts and is subject to the following rules:
The top node of the hierarchy cannot have a superordinate contract
Every contract except for the top node has exactly one superordinate contract
Every contract can have none, one, or multiple subordinate contract(s)
A contract can be part of no hierarchy or exactly one hierarchy
Note:Contract hierarchies are only available for purchasing contracts. They are not available for global outline agreements.
You can activate this from SRM Server> Cross application settings>Activate Hierarchies for Product Categories, Vendors, and Contracts.
Note:
These hierarchy functions should not be reset once they have been activated.
Similiarly you can do this for Vendor Hirerachies.
Please visit link for more details: http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/content.htm
Thanks

What are the installation steps for Oracle Fusion HCM

Hi all
I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
Thanks

If you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
Atul has also posted some good stuff on installing:
http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/

What are the pre requisites for SAP SRM7.0 DB Rrefresh?

Hi,
What are the pre requisites for SRM DB Rrefresh?
Thanks

Hello Peter,
When it comes to DB refresh you need to know what all the client dependent data which needs to be retained.
For example you need RFC connections, Variants, User master etc.
As a pre task of Database refresh you may need to export the tables which are related to this so that once the database is refreshed you need to import them.
Ensure the proper backup of production database is available. Also check all the STMS configurations which need to be retained again.
Make sure that you need to have enough disk space which can accommodate your production data in to the pre production system.
These are some of the general consideration one needs to have but again it depends on the environment on which one runs SAP systems.
Regards
Vivek

Are the templates ready for production ?

Similar Messages

Maybe you are looking for