Are there a  pre configured package with a group of common smartforms ?

Hi,
Could you please tell me if there exits a package with a set of common smartforms?, i read that in saplabs were avaliable... but i have not founded it...
Could you give me the link where i can found it?
I looked for... but i have not founded it.
Thanks in advance!.
Regards,
Albio.-

Hi!
You can find it at:
http://service.sap.com/installations
in menu choose "Entry by Application Group" -> "SAP Best Practices" -> "Best Practices for mySAP All-in-One" -> "PRECONFIGURED SMART FORMS"

Similar Messages

  • Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

    Hello
    I have Lync 2013 and 2010  , still i didn't finish my migration completely from 2010 to 2013 .this  is  coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
    There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013  front end and backend server's .
    later on after restarting both the front end and the back end server's i start having hundred's of  these error's related to "LS Call Park Service".
    so any advice for these issue ? and what is the effect for these error .
    below is the error I got .
    The database being used by Group Pickup is not the appropriate version.
    The database is not the correct version:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
    Actual...   SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
    Cause: The database has not been upgraded.
    Resolution:
    Upgrade the database to CU1.
    ==============================================================
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    =============================================================================
    Kind Regards
    MK

    Hello
    thanks Holger for u r replay .
    due to the Microsoft article about the cu :
    I run only :
    Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
    Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
    Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
    Install-CsDatabase -CentralManagementDatabase command to apply the changes.
    here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
    PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
    VERBOSE: Install databases required by Lync Server role(s).
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is DbState_RequiresMinorUpgrade.
    Database rtcxds set to mode Restricted.
    Dropping all procedures, functions and views from database rtcxds.
    Executing RtcDb.sql...
    Adding master role...
    Setting owner for database rtcxds to sa.
    Creating login MyDomain\RTCHSUniversalServices.
    Creating user MyDomain\RTCHSUniversalServices.
    Creating Schema MyDomain\RTCHSUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
    Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
    Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
    Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
    Setting the database rtcxds to multi user mode.
    Database rtcxds is set to multi user mode.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcshared.
    Database created by script "RtcSharedDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
    VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    Checking state for database rtcab.
    State of database rtcab is DbState_RequiresMinorUpgrade.
    Database rtcab set to mode Restricted.
    Dropping all procedures, functions and views from database rtcab.
    Executing RtcAbTypes.sql...
    WARNING: Warning: Failed to execute batch --
    -- Copyright (c) Microsoft Corporation. All rights reserved.
    exec sp_addrole N'ServerRole'.
    Executing RtcAbDb.sql...
    Setting owner for database rtcab to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
    Setting the database rtcab to multi user mode.
    Database rtcab is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
    VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    Database created by script "RgsConfigDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    Database created by script "RgsDynDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    Checking state for database cpsdyn.
    State of database cpsdyn is DbState_RequiresMinorUpgrade.
    Database cpsdyn set to mode Restricted.
    Dropping all procedures, functions and views from database cpsdyn.
    Executing CpsDyn.sql...
    Setting owner for database cpsdyn to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
    Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
    Setting the database cpsdyn to multi user mode.
    Database cpsdyn is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
    VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    Database created by script "ArchivingDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
    VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    State of database LcsCDR is DbState_RequiresMinorUpgrade.
    WARNING: The database LcsCDR being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
    WARNING: The database LcsCDR being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
    Database LcsCDR set to mode Restricted.
    Dropping all procedures, functions and views from database LcsCDR.
    Executing CdrDb.sql...
    Setting owner for database LcsCDR to sa.
    Creating login MyDomain\CSAdministrator.
    Creating user MyDomain\CSAdministrator.
    Creating Schema MyDomain\CSAdministrator.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
    Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
    Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
    Setting the database LcsCDR to multi user mode.
    Database LcsCDR is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing CdrJobs.sql...
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    State of database QoEMetrics is DbState_RequiresMinorUpgrade.
    WARNING: The database QoEMetrics being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
    WARNING: The database QoEMetrics being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
    Database QoEMetrics set to mode Restricted.
    Dropping all procedures, functions and views from database QoEMetrics.
    Executing QoEDb.sql...
    Setting owner for database QoEMetrics to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
    Setting the database QoEMetrics to multi user mode.
    Database QoEMetrics is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing QoEJobs.sql...
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
    VERBOSE: No changes were made to the Central Management Store.
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
    WARNING: Detailed results can be found at
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    PS C:\Users\MK>
    I hope some one can confirm no issue with what I did ??
    Kind Regards
    MK

  • Error : There was a problem communicating with the Group Pickup backend database.

    Hi , 
    I found this error in Event viewer for Every 2 min on lync server 2013 :
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=(local)\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    what can i  do ?

    Hi,
    Did you solve the issue with the help of the suggest Anthony provided above?
    If the issue persists, please check if you update the latest vesion of Lync Server 2013. If not, please update it, make sure after install the update for all FE Servers,
    then make sure to update BE Server as well. Then rerun Step 2 Setup or remove Lync Server Components.
    Here is a similar case may help you:
    https://social.technet.microsoft.com/Forums/lync/en-US/3b616e51-93ad-430a-aa93-57c2fd19e0f6/call-pickup-db-issue-after-cu1-update-to-lync-2013-enterprise?forum=lyncdeploy
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Pre-configured Linux with Oracle DB and Applications

    Does anyone know if there is a pre-configured oracle-linux stack out there that would have all the components already configured. I have seen this for other products such as sugarCRM. Its really nice to have this, since it takes the complexity and installation time out of the equation, especially if you are just trying to test or demo the software. I imagine a PeopleSoft Oracle Linux Stack, as well as one for each of the Oracle Application and Software Suites. If not, i guess i will go the more fun route of downloading and installing each package individually.

    There is package, named oracle-validated. it verifies and sets system parameters based on Oracle validated configuration recommendations for Oracle Enterprise Linux Release 4.
    [root@jch-lnx etc]# rpm -qli oracle-validated-1.0.0-8.el4
    Name : oracle-validated Relocations: (not relocatable)
    Version : 1.0.0 Vendor: Oracle
    Release : 8.el4 Build Date: Wed 19 Sep 2007 05:46:22 AM CST
    Install Date: Wed 26 Sep 2007 12:03:06 PM CST Build Host: ca-build6.us.oracle.com
    Group : Test Environment/Libraries Source RPM: oracle-validated-1.0.0-8.el4.src.rpm
    Size : 39137 License: GPL
    Signature : DSA/SHA1, Wed 19 Sep 2007 05:46:24 AM CST, Key ID 2e2bcdbcb38a8516
    Summary : Verifies and sets system parameters based on Oracle validated configuration recommendations for OEL4
    Description :
    This package verifies and sets system parameters based on Oracle validated configuration recommendations for Oracle Enterprise Linux Release 4
    Files affected: /etc/sysctl.conf, /etc/security/limits.conf, /etc/modprobe.conf, /boot/grub/grub.conf
    For changes to modules, this package installation will modify module paramters and re-insert.
    /etc/sysconfig/oracle-validated/oracle-validated-verify
    /etc/sysconfig/oracle-validated/oracle-validated.params
    /usr/bin/oracle-validated-verify

  • Is there a pre-built VM with just Oracle Linux?

    I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.

    881656 wrote:
    I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.
    I would second Bjorn's suggestion to just go ahead and install Oracle Linux from scratch. As a DBA you need to be familiar with a lot of OS level admin stuff, so installing the OS from scratch and doing the minimal configuration needed to install Oracle is, in itself, an important part of your professional development. If you take a shortcut of using a pre-built vm you are just stunting your own growth.

  • Are there any ways to package a J2ME app and let people view via computer?

    Are there anyways to packaged a J2ME app with the emulator?
    So that when people click on a bat file, that emulator will run along with the J2Me app?
    I saw this in the jbuilder console
    C:\WTK21\bin\emulator.exe -classpath "C:\MyApp\classes;" -XdeviceefaultColorPhone -Xdescriptor:"C:\MyApp\jad-temp\MyApp.jad"
    I belive it can be done?
    Please advise. Thanks

    What? An .exe? What is this? Do you know that you are coding in Java? Especially in J2ME? What do you want with a windows executable on your mobile phone?
    Once more:
    1) pack your project and generate the jad/jar files. This contains your code, the app you wrote.
    2) To run this, you need a phone or an emulator. (like you need windows to run an exe). So either you transfer these to a phone and run it from there or use the emulator that comes with the WTK or SunONE or whatever. And for running on an emulator, you can write a .bat for starting. Of course, you can write a .exe but it will do nothing else than calling the emulator with its parameters.
    Thats the Java principle btw:
    Bytecode (i.e. jad/jar in mobile environment)
    Java VirtualMachine (i.e. an emulator)
    OS (i.e. Win32)
    hth
    Kay

  • Are there any refurbished i5 airs with 8gb ram?

    When looking at the refurbished macbook airs, I noticed that there are only either the base models with standard i5, 4gb of ram or a few i7 with 8gb.
    I wonder why apple isn't selling any refurbished base i5 models with an upgraded 8bg ram.

    Apple makes the platinum level of refurbished products in the industry, they are not simply MacBook Airs that get a nice polish. Because of that, they are popular. It's a matter of supply of refurbish-able Macs and how fast they sell. You really have to check the website frequently to get what you want, and jump on it fast, especially anything popular.
    The problem with the i5 plus 8GB is that it was a configured option, which means it's rare. They may not get one that can be refurbished to Apple's standards.

  • Are there ways to interface OBIEE with customer application?

    Our OBIEE version is 10.3.4 on Redhat, OBIEE connect to a Oracle 11.2.0.2 database running on the same box of Redhat as OBIEE. Our application is java based web application using Tomcat, it point to OLTP database of Oracle 11.2.0.2 on an dedicated Redhat server.
    One of the original requirements for the application was to process OLTP data with complecated logic and create reports in text files. Now the customer wants to use OBI to display, print and distribute the reports. The best way to meet this requirement change at the late stage of development appear to be interfacing the application with OBIEE, if possible at all. That way, on clicking a button in the application GUI, a stream of formated data is sent to OBI pressentation service as a response to a request. An OBI client page will then be displayed to shpw the reports, and allow user to print and distribute.
    Now are there some OBI APIs allowing an application to call to interface with OBIEE?
    Thanks.

    Hi,
    I do not gave further experience with this subject, but I guess this is what you are looking for;
    http://download.oracle.com/docs/cd/E12096_01/books/AnyWebServ/AnyWebServ_Overview3.html
    You will probably have to do some further research.
    Maybe Venkat could be of any help.
    http://oraclebizint.wordpress.com/2007/07/31/customizing-obi-ee-soap-api/
    Good Luck,
    Daan Bakboord
    http://obibb.wordpress.com

  • Are there any new 17 " MBPs with matte display out which run properly?

    Hallo,
    I am about to buy one 17 MBP with matte display. But now I ve read all these posts and
    I hesitate to order one. I don't want to have all the trouble to send it back and then wait
    again. So, are there any guys who can not report these graphic issues?
    Yours
    Matthias

    CD = Core Duo, the 1st generation of 17" MBP from way back in 2006. It was flawless when I got it. It's still running perfectly 3 years later. Only issue was a bad battery, and that was a known manufacturing problem at Sony that affected Macs as well as PC laptops. Apple extended the warranty to cover the issue, and replaced mine for free ~3 months after my one-year warranty expired. Two colleagues have the new 17" unibody MBP, one with glossy and one with matte, both are flawless.

  • Are there any training seminars included with a creative cloud subscription?

    Hello,
    I am looking for training with the creative cloud. Are there any seminars that go along with my subscription? I'm not talking about simple training videos - I need full training for my employees. Perhaps an online seminar?
    Thanks!

    You will probably get more information by asking in the forum for the programs you use
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    If you use Premiere Pro, go to http://forums.adobe.com/thread/1448923

  • Are there any Lenovo X220 owners with IPS that don't notice ghosting?

    I need to pull the trigger soon and have been watching all the posts about fan noise, throttling and IPS ghosting. 
    Are there any users with an IPS screen who do not notice, or are not bothered by, ghosting on their IPS screen?
    I would prefer IPS for the better viewing angles and color reproduction.

    As far as I can tell, the two units I got all exhibit ghosting if I just let the screen idle for too long (assuming idle at max brightness for more than 15 minutes), I think it's an issue that will be addressed by Lenovo later and for the time being, it doesn't hinder productivity unless your use of the company requires the image to stay stationary for an extended period of time.

  • Hello, are there many others having problems with creating Genius Playlists from their iPhone 5's

    Hello People,
    are there many others experiencing problems creating Genius Playlists from their iPhone 5's???
    I have a 64GB Black iPhone 5 and a 32GB White iPhone 5, I have recently performed a fresh install (wiped phone memory and installed Apps individually again) yet even after this and no less then several calls to Apple I am still unable to create a genius playlist on either phone. The message I receive after hitting the Genius "star" is "The operation couldn't be completed. Operation timed out" Operation timed out."
    I have tried this also on 3G and receive the same message........

    Lawrence Finch
    ShadowDancer1000 wrote:
    I wish Apple would have provided more detail on how it worked. I wouldn't have posted this if I new that SMS & Mac Calling had nothing to do with Bluetooth pairing.
    You mean like this? Get help using Continuity with iOS 8 and OS X Yosemite
    Please note how Apple articulates this though.
    Check your settings
    Check the following settings on your iPhone, iPad, or iPod touch:
    Go to Settings > Wi-Fi and turn on Wi-Fi if necessary.
    Make sure your iOS devices are connected to the same Wi-Fi network by going to Settings > Wi-Fi and comparing the name of the network each is on.
    Go to Settings > Bluetooth and turn on Bluetooth if necessary.
    Go to Settings > General > Handoff & Suggested Apps and make sure Handoff is on.
    Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
    Sometimes things have to be explained in more detail for the general consumer who has been conditioned for decades to think about wireless  cellphone audio / light data to [anything other device else] connectivity in a certain fashion. That is to say Bluetooth dependent ...
    For the non-technical person, which overwhelmingly many Apple users are, they would see that bulleted point and think if Bluetooth is not paired and active, then they would not received the full scope of their Continuity features.
    It would have been better for the copywriter who wrote this to (*) footnote this entry and explain that while Bluetooth recognition may be necessary between Yosemite and iPhone, SMS Push to iMessage and Mac Calling does not require an actively paired connection as these functions are dependent on iCloud and both devices being registered on the same WiFi network.
    Thank you to all who helped me get my mind around and figure this out.
    It has also opened my eyes to how iCloud has become a critical link in Apple's overall walled garden  and business strategy.

  • Are there any Language Translators Libraries with Java API

    I have a single xml document that contains all the text displayed in my application. I now want to translate the text into other languages and I thought I could do it my using the SAX to parse the individual elements, translate the text and then write out the resulting file. Are there any open source/java libraries that can translate text into other languages.
    For now I am just interested in the most popular European languages, French,Spanish,German and Italian

    I hear what you are saying, but if it could just make start that would be great. I have a program that I have been very careful to ensure all text is localized but I dont have the time/expertise to translate it myself or the funds to get it done professionally. I also have my help manual in docbook xml format so would like to translate that as well.
    I thought AltaVistas BabelFish might have a Java API but have been unable to find one.
    Also even if the translation was to be done by humans it is very difficult for a translater to edit the file in xml format,so I think I still need a process to extract the text from the file, allow it to be translated, and then read it back in.

  • Is there an option to import with custom groups in PSE 9's organizer?

    With the Organizer included with PSE7 (and earlier, as I recall), I always used the option Custom Groups (Advanced) in Create Subfolders. This allowed me to easily save imported photos into different folders and naming the files accordingly.
    For example, on one media card I might have some family activities, some Kiwanis activities, and skiing activities. With Custom Groups, I could import them in small groups, with different base names, and so on.
    How do I accomplish those same things in PSE9. It was such a useful feature, Please tell me they did not remove it.
    Thanks!

    As far as adding java script to the generated form you can add a pl/sql code having java script in it for eg below is a sample function
    which has javaScript in it.
    CREATE OR REPLACE FUNCTION sample_javaScript
    RETURN varchar2 IS
    l_string varchar2(1000);
    l_char_en varchar2(1) := chr(38);
    begin
    l_string := '<script language="JavaScript1.1">'||chr(10)
    ||'<!--'||chr(10)
    ||'function getField(form,fieldName,theElement)'||chr(10)
    ||'{ '||chr(10)
    ||'var objName = "";'||chr(10)
    ||'var tmp = ""; '||chr(10)
    ||'var recnummer = 0;'||chr(10)
    ||'var dAction = ""; '||chr(10)
    ||'var sel_idx = 0; '||chr(10)
    ||'var cnt = 0; '||chr(10)
    ||'var instance = 0; '||chr(10)
    ||'var slicedName; '||chr(10)
    ||'var slicedButton; '||chr(10)
    ||'var fillData = new Array(); '||chr(10)
    ||'slicedButton = theElement.name.split("."); '||chr(10)
    ||'recnummer = parseInt(slicedButton[3],10); '||chr(10)
    ||'for (var i = 0; i < form.length; i++) '||chr(10)
    ||'{ '||chr(10)
    ||'slicedName = form.elements.name.split("."); '||chr(10)
    ||'tmp = slicedName[2]; '||chr(10)
    ||'instance = parseInt(slicedName[3],10);'||chr(10)
    ||'if (!tmp) '||chr(10)
    ||'continue; '||chr(10)
    ||'objName = tmp; '||chr(10)
    ||'if (objName == fieldName '
    ||l_char_en||l_char_en||' instance == recnummer) '||chr(10)
    ||'{'||chr(10)
    ||'return form.elements[i].value; '||chr(10)
    ||'} '||chr(10)
    ||'} '||chr(10)
    ||'} '||chr(10)
    ||'//-->'||chr(10)
    ||'</script>'||chr(10);
    return l_string;
    end sample_javaScript;
    Grant this to the schema of the form if they are in different schemas.
    In the last sql section (Before Display of the form) you can simply call this function like this.
    htp.p(schemaName.sample_javaScript);This will place java script at the form level.
    You can similarly write what all javascripting you wish to do at the form level instead of
    element level.For firing of Lovs also you can write code in the java script that will do the required action.

  • Are there any known problems/bugs with Lion pre-loaded?

    I'm in the market for a Macbook Pro and am wondering if I'd be better off getting it now before it comes shipped with Lion and install it later on when any bugs are worked out.

    When I called last night they said they couldn't tell me if they were going out with Lion yet but reminded me of the free upgrade if it didn't come pre-loaded. The local store I called said they were still selling MBPs without it.

Maybe you are looking for