Are there any compatibility issues with AirPort Extreme 802.11n and Maverick OS X

Are there any reported issues?

Welcome,
The only issue is that the "old" Airport Utility (5.6/5.6.1) doesn't work with Maverics and you have to use the 6.3.2 version.
Having said that I use it with 6 AP (mixture of AX's and XE 2s) just fine with over 20 devices hanging off them and all Mac on Maverics.
It may depend on which Airports you have, if they are supported by the new Utility you should be fine, as ever YMMV!
Regards,
Shawn

Similar Messages

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it. I'm on Mavericks 10.9.5.

one obstacle, quickly removed. thank you.
nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

Are there any compatibility issues with Sonos and Airport extreme??

are there any compatibility issues with Sonos and Airport extreme??

Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

I am frequently unable to join the internet or it runs very slowly. I have a Time Capsule in my LAN. Are there any compatibility issues with Time Capsules and any ISPs?

I am frequently unable to join the internet or, if I can, it is exceptionally slow. The ISP says nothing is wrong ontheir end. Are there any compatibility issues with any ISPs when using Time Capsule and/or iMacs?

Tried this several times to no avail. I believe it is the ISP causing the problem...Time Warner.

Are there any compatibility issues with Captivate and OS X Yosemite?

Has anyone noted any compatibility issues with Captivate and Yosemite?

I had the same issue. Updating resolved this as well.
I tested with Captivate 7 and almost everything seemed to work fine. I tested with an existing project file containing TEB's, Motion recording, a third party drag 'n drop widget, and a playbar with a TOC. This all seemed to work fine both in preview mode as after publishing. I also tested with Captivate 6 although I didn't publish anything. Here, everything seemed to work fine as well. However this was only SWF.
As jpm226 described for 8, previewing HTML5 doesn't seem to work with Captivate 6 and 7 either. Chrome gives a "This webpage is not available" notification. Publishing however, does seems to work.
Fortunately, the client we work for that asks us to use Captivate 7, also asks for SWF output. So I'll continue to use Yosemite for now.

Speed or Performance Issue with Airport Extreme 802.11n

Background:
Router 1: Linksys Wireless G 2.4GHz Router WRT54G (have been using for 1.5 years)
Router 2: Airport Extreme 802.11n Base Station Model: A1143 (just arrived)
Macs: Intel MacBook Pro & MacBook both Newtwork Adapters upgraded to 802.11 a/b/g/n and verified via "Netwrok Utility". The Netwrok Utility also displays the link speed at 54 mb under interface info. when the Linksys G router is selected and the link speed at 144 mb when the airport extreme n is selected.
Observation & Issue:
Currently, for testing both network routers have been used seperatly (connected directly via the cable modem) and speeds for each latop verified via http://www.speakeasy.net/speedtest/ and normal "human" usage web surfing observations via Safari. Results below:
1. When using the Linksys G router both the MacBook and MacBook Pro appear to be performing well and responsive with little or no wait on graphically/media intense sites such as apple.com
The speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 8MB to 10MB speeds
2. On the otherhand, when using the Airpot extreme both the MacBook and MacBook Pro appear to be performing slower than usual with higher waits for image and page downloads.
In addition, the speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 2MB to 3MB speeds. Lower than what we experienced using the older router.
Request for advide or help:
1) Is this normal? Assuming it is not, what esle can I look at that can help me determine the root cause. The Airport Utility does not offer much assistance in this matter.
2) Thus far I have opted to revert back to my Linksys g router. However, before returning the product... any other adivce on a potential miss in the configuration or setup would be of great help.
3) Other's experiencing the same?
MacBook Intel & MacBook Pro Intel Mac OS X (10.4.8) SUing Comcast Cable Modem

Contacted Apple Support (have an AppleCare account) tonight and the issue has been resolved with the caveat that I cannot have a mixed (g & n) radio mode on the same airport extreme base without significant loss of performance. These are the steps I was walked through to resolve my particular case:
1) Verify that your hardware is indeed upgraded to use n (see steps in my original post)
2) Open the AirPort Utility (new program that was installed from the install disc under applications/utility)
3) Click on the Airport Extreme image on the right hand column to open the Airport Extreme settings
4) Select the "Wireless" tab, then "Radio Mode" drop down and select 802.11n only (5 GHz)
5) Select Update to apply new settings.
Results:
When running the speakeasy.net/speedtest I am seeing results that are indeed better. However, the test shows that the top speed lowers a bit and jumps back up unlike when I am on my old g router, which does not have such a jump.
This test is not perfect but a good gauge. If anyone has any other ideas to test performance more accurately, please do let me know.
Note: Only n enabled devices now work with the n router. I will keep my old g router as a backup and for my work pc laptop.
Hope the above helps and thanks.
MacBook Intel & MacBook Pro Intel Mac OS X (10.4.8)

Seagate ST8000AS0002 8TB 5900RPM 128MB Cache SATA3 - for Backup Data Only. Are there any compatibility issues with an older 3,1 Apple Mac Pro 8-Core 2.8GHz (4-Core x 2) ?

Finally mass storage drives are being released. The Seagate ST8000AS0002 8.0 TB 5900RPM has just been released in Australia and I was advised to check on any compatibility issues, being that my 3,1 Mac Pro is an old, but working fine machine.
I have read there are possible issues with using HDs greater than 2TB with the MP 3,1 . But checking with OWC, they say the Seagate 4.0 TB Solid State Hybrid Drive is compatible for use with the MP 3,1.
So can the hardware and operating system handle an 8.0 TB of this sort ?

The problem is with formatting the large disk. The Mac can see and use them if formatted for a Mac
Format large disks
That bug appeared in 10.8.4, and has not yet been fixed.
using a Disk Utility from any older Mac OS X, including the 10.6 DVD (if your Mac can boot from it) or any saved Installer DVD or thumb drive will work.
Another work-around is to move that drive to an external enclosure and Erase it there (provided your enclosure is modern enough to deal with drives over 2.2TB.

Cannot create WDS with Airport Extreme 802.11n and Airport Express b/g

I have gone through all the steps to set up a WDS with my Airport Extreme Dual Band and my Airport Express b/g.
Every time I try to set it up and update the AX the AX disappears from the airport utility and I can no longer see it. I can however set it up to "join a network" just fine.
Anyone have any idea why I cannot do this? I haven't seen anything saying that the AE is not compatible with the AX.
Ideally what I would like to do is have the AX extend the network and then use an ethernet cable to connect it to an imac g4, thus giving the computer "wireless" internet.
Any ideas or suggestions?
Thanks

So just to clarify even if I was to buy a new "n" AX I would still be relegated to "g" speeds?
That's correct if you use the WDS settings on both the AEBS and AX.
But, if you had the "n" AX, you could configure it to "extend a wireless network" and maintain "n" speeds on the network. There would still be some bandwidth loss...10-15% or so...that's unavoidable unless you go to an ethernet connection method.
Do you think for my application it might be better to just buy a reputable wireless usb dongle?
If I understand correctly, you need an ethernet connection for a computer. Why not consider a pair of ethernet powerline adapters? One device plugs in near your AEBS and the other near the device that needs the ethernet connection. The pseudo ethernet signal is conducted over the AC powerlines in your home. This is the next best choice when you can't run an ethernet cable through the house.
This would be a faster and more stable connection than any type of wireless application. It's plug and play. In addition to the powerline adapters, all you'll need are two short ethernet cables to connect one adapter to a LAN port on the AEBS and another short ethernet cable to connect from the adapter to the G4's ethernet port.
Any electronics superstore will have a selection to look at. The cost is approximately $75-125 for a pair depending on how much speed you choose.

Are there any compatability issues with V6 and Norton 360 as there have been in the past?

When I last tried to upgrade to a newer version, a number of my Norton 360 features would not function and I got a popup message saying that there was some sort of compatability problem. I've subsequently had to go back to V4.

Ne there aren't any "issues" with Norton. Norton released a compatibility patch for Firefox 6 last Tuesday, a couple of hours after Firefox 6 was released.
http://community.norton.com/t5/Norton-360/Update-Available-Firefox-6-0-Compatibility-Patch/td-p/512484

Are there any compatibility issues with Mavericks and EMC Celerra File shares, particularly with the SMB protocols?

Our company uses a EMC Celerra file share, but most of our users are Windows based. We have a small production department of 7 macs. Starting with Snow Leopard, we noticed some issues with SMB. We were able to resolve those issues, but had to wait to upgrade to Lion because there were additional SMB or permissions concerns with the Celerra file share and Lion. Now, we are again waiting to upgrade to Mavricks because of the way it handles user permissions. Does anyone using Mavericks now also connect to a EMC Celerra file share? Thanks!

Our company uses a EMC Celerra file share, but most of our users are Windows based. We have a small production department of 7 macs. Starting with Snow Leopard, we noticed some issues with SMB. We were able to resolve those issues, but had to wait to upgrade to Lion because there were additional SMB or permissions concerns with the Celerra file share and Lion. Now, we are again waiting to upgrade to Mavricks because of the way it handles user permissions. Does anyone using Mavericks now also connect to a EMC Celerra file share? Thanks!

Are there any known issues with speed between excel 2003 and 2010 when using WAAS?

Request asked by customer. Thought I would run this by the forum first.
Can you please raise a ticket with Cisco TAC asking why Excel files in 97-2003 file format cannot be fully optimized when compared to the same file being saved in the latest file format?
When using the latest file format, the user experience is amazing and up to 100x faster to open and save files. Our testing has identified an issue with the older file format.

I deployed WAAS about 3 years ago. Part of the deployment was before and after testing. When the users used Office 2010 the results were good. When they used Office 2003 the results were terrible. Some files took minutes to open, some never opened. Solution was to upgrade to O2010.
Hope this helps.

Are there any compatibility issues with https compression and firefox 15?

some sites do not load.

Hmmm, what makes you think there is a compression issue?
Some users have noticed gibberish pages full of symbols from Google and Twitter because a preference was corrupted. These threads address that issue:
* [https://support.mozilla.org/en-US/questions/931560 Gmail is not loading; only showing gibberish]
* [https://support.mozilla.org/en-US/questions/930085 Gibberish loading on certain websites]
* [https://support.mozilla.org/en-US/questions/930118 network.http.accept-encoding keeps resetting and won't lock]

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Are there any know issues with using multiple (2) apple tv's in the same household??

I'm thinking of getting a second Apple TV. Are there any known issues with using multiple (2) apple tv's in the same household? Thank you in advance.

No, shouldn't have any problems

Are there any known issues with focus stacking or auto align causing PS to stop responding?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Are there any compatibility issues with AirPort Extreme 802.11n and Maverick OS X

Similar Messages

Maybe you are looking for