Are there any directions on posting/formating code on forum?

Someone once said that I should post code with special tokens so it can easily be checked and compiled.
Are there special ways to post code on forum? Can't find any page about using special tokens.
This was the note below?
And it's not even possible to recompile your program to find out, because you didn't post it
correctly (read the page about using special tokens to format your message).
Thanks

When you post, look above the subject box, you will see a link called special tokens.
http://forum.java.sun.com/faq.jsp#messageformat

Similar Messages

  • Are there any techniques for memorizing source code and its place ?

    I forget stuff quickly so I have to start everything over and over again . I'm fed up with this ! Please help me ! Thanks .

    Fed up with what?
    What the heck are you talking about?

  • I'm trying to cancel my plan but each cancellation process is taking me in circles, keeping me from canceling. are there any direct routes to the cancellation of my plan?

    ?

    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

    Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
    I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
    Reference: http://www.securityresearch.at/en/development/fortify/
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Hi Amalaraja Fernando,
    I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
    SharePoint diagnostic manager
    SharePoint enterprise manager
    What is SPCop SharePoint Code Analysis?
    Dmitry
    Lightning Tools Check
    out our SharePoint tools and web parts |
    Lightning Tools Blog | Мой Блог

  • Are there any standard Idocs or Bapis for posting the data into transaction

    Hi,
    Are there any standard Idocs or Bapis for posting the data into transactions ME42N and IK11?
    Thank You.

    Thank you.
    Any idea of the other one?

  • Are there any aps (free or paid) that convert panasonic avchd to a format imovie will import?

    Are there any aps that convert Panasonic avchd video to a format imovie will import and edit?

    [http://wetpixel.com/forums/lofiversion/index.php/t16884.html]
    This might provide a bit of insight.

  • I want to put my .m2ts movies (Sony HD recorder) on my Ipad3. It looks they need to be converted to h.264 format. Question is will Quicktime Pro work or are there any better software solutions. Running XP system. Thanks

    I want to put my .m2ts movies (Sony HD recorder) on my Ipad3. It looks they need to be converted to h.264 format. Question is will Quicktime Pro work or are there any better software solutions. Running XP system. Thanks

    You could try Handbrake, it works quite well.

  • Hi everyone! ive been stolen my ipad mini 15 days ago, i did set up pass code but ididnt turn on Find my Iphone, are there any ways to track my ipad mini locate?thanks 4 ur help?

    hi everyone! ive been stolen my ipad mini 15 days ago, i did set up pass code but ididnt turn on Find my Iphone, are there any ways to track my ipad mini locate?thanks 4 ur help?

    No.
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Mac Computer
           Find My Mac can be used from Find My Phone at iCloud.com and via Find
           My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0
               9. Prey 0.6.2

  • Are there any apps that allow you to dial direct from tapping a photo such as a photo phone book?

    Are there any apps with a photo phone book that allows you to tap a photo to dial?

    How could I put this in as a feature request? Should I try to find the existing bug in bugzilla and comment on that, or should I open a new bug? I would really love to see this happen, I think it is a worthwhile and usefult feature.
    I tried searching bugzilla for a bit but I could not find the relevant bug. If you know it, please link to it.
    Thanks!

  • Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
    Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
    Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
    1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
    No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
    2) Are there any changes I can make to get this working again?
    If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
    Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

  • Are there any examples of queres or reports for the Access DB TS can generate?

    I am currently useing the default TestStand SPC database storage routine to store the results of all runs. Are there any tools, queries, reports, etc. to help me post process this database? I thought I would check here before making something myself. Mainly looking for something that will do a scatter plot for a certian test so I can see where all the data is falling within the limits.

    Currently NI does not have any post processing tools to assist you in formating the result information specifically for TestStand databases. Obviously using LabVIEW or LW/CVI or some other programming language you could write your own program to do such post processing.
    Scott Richardson - NI
    Scott Richardson
    National Instruments

  • Are there any 3rd party tools which provide Microsoft Azure IaaS diagnostics?

    Are there any 3rd party tools currently, which can be used for giving detailed diagnostics Information about the IaaS environment (like on VM's, Virtual Network etc.) in a detailed report format periodically? Please note that I am looking for any such tools
    around IaaS environment diagnostics here, and not about Application diagnostics.

    Hi Bahree,
    Microsoft does not suggest  a specific third-party product. However, we do use them, and see lots of other customers use them.
    Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch , You may browse to these site and few others to learn more, and chat with their folks directly on how they support Windows Azure.
    I see that Microsoft has published a self-help diagnostic package for running Windows-based virtual machines (VMs) in Azure IaaS and this this diagnostic package does not require opening a Support Request with
    Microsoft
    This package helps to diagnose and resolve common issues on running Windows-based VMs in Azure IaaS
    We may download the diagnostic package from Microsoft's Support Diagnostics Self-Help Portal:
    https://home.diagnostics.support.microsoft.com/SelfHelp?knowledgebaseArticleFilter=2976864
    You might want to see
    Microsoft Azure Virtual Machine Monitoring with Azure Diagnostics Extension
    Regards,
    Shirisha Paderu

  • Are there any shortcuts for creating Value Object Classes?

    Hi,
    I'm using a Remote Object to connect to my server
    (pyAMF/Django). I'm getting stuck with the creation of Value Object
    Classes. It doesn't seem very DRY to have a class on my server
    representing the data model and then have to recreate that class
    and all its properties in my Flex app.
    Are there any shortcuts for creating client side VOs from
    server side data?
    I was thinking about declaring an empty VO class in Flex, and
    then dynamically assigning/casting my Proxy object to that class.
    It seems like that approach may cause problems for the Flex
    compiler though.
    Any hints?
    Thanks!

    quote:
    Originally posted by:
    tptackab
    Oh man, do I feel your pain. I'm not sure what middle-tier
    technology you're using, but I'm using Java (w/Spring) and I
    absolutely hate having to create and maintain two sets of VO (aka
    data transfer - DTO) object for Java and Flex.
    One thing that has helped me in that area is a free tool from
    Farata Systems called
    DTO2Fx. If you're using Java and Eclipse, it's a great time saver.
    You simply install a (very lightweight) Eclipse plugin, add a
    single annotation to your Java VO classes, and it automatically
    generates your Flex VOs. It even creates a base and extended
    version of each VO on the AS3 side so you can add code to the
    extended VO without fear of having your changes overwritten when it
    regenerates your Flex VOs.
    Here's a like to thier
    PDF that
    gives instructions and a download link. I had it up and running in
    my application in less than 30 minutes!
    I'm using Python/Django serverside (PYAMF is my AMF
    serializer).

  • Are there any hot fixes or releases due soon?

    It's been a while since I've seen anything released from the update centre. Are there any fixes due for release soon?
    Despite several months, a few hot fixes and the JSC2 Update 1 release, JSC2 doesn't seem to have improved all that much since the initial release.
    The main issue for me at the minute is performance. I know this has been discussed several times on this forum, but there is very little information on when we might see a release that starts to address this issue. I realise that the issue is complex and probably covers many functional areas of the app, so a hot fix or two will not address the problem. However, at the minute working with JSC2 on a medium sized application is unproductive and is becoming almost unusable. For example, even minor code tweaks or property changes completely lock the IDE for around 30 seconds and send my CPU usage to 100%. The thing is that, functionally JSC2 is excellent. This is the way I want to be building my JSF applications and I'm very grateful to Sun for making it available for free. If it wasn't hampered with these performance issues I'd be knocking out web apps in no time at all but unfortunately, as it stands now, it is almost a hinderance. I have some new projects coming up where I would like to use JSC2 but I cannot recommend it on the grounds of productivity.
    When can we expect something to be released that starts addressing performance? When can I start recommending JSC2 again?

    As per previous posts, complete agreement.
    I have built a production system in-house for a large company using JSC. I had to get my machine upgraded to 2GB just to get some usuability but it still needs a few jsc re-starts and appserver restarts through out the day.
    Functionality wise, JSC is such a winner and the guys at SUN have indeed did a great job. I come from a VB environement for the last 12 years, so having a rich web client tool was high on my priority. But if I am to try and preach to the rest of the J2EE guys here, the performance issues really need to be addressed. They are used to Eclipse and I don't need to go on about how good that tool is. If any other company gets JSF to work under Eclipse the way JSC does, I would have no hesitation in using that tool.
    I hvae tried some of the Eclipse based JSF IDE's and they don't even compete with JSC in terms of ease of use and putting apps together. But they do not lock the machine for 30 secs when I click a property or right click on a component !
    I have been one of the champions of JSC from the start and I still am. The system I wrote has near 300 users and is working fine with not one
    problem in 3 months. If this performance problem can be beat, JSC will set the standard for GUI development for years. If not, then it will be consigned to the nearly made it bin.
    To the guys at SUN:
    After all the time and effort you have put into this product, I'm sure there is no overnight cure for the problems. I am sure you are working on the problems. For me, I don't care about any new Ajax components, etc in the updates. If the next patch gets JSC even working 50% better performance, I will be a happy man. Then I can go and try to convert the unimpressed.
    if not, then I will be forced into a corner to use IDM RAD tool for JSF development, of which I do not want to do. My company has an IBM affiliation, but I like to use the best tools for the job.
    Overall, impressed by JSC but the final hurdle has not been jumped.
    Regards,
    LOTI.

  • Are there any libraries can be used to generate Type 1 font postscript file

    I am trying to create a Type 1 font postscript file. But I found it is hard to find the library to generate the Type 1 font postscript file. I just found a library named iText which can create the Type 1 font PDF file.
    Are there any libraries can be used to generate Type 1 font postscript file?
    Thanks!

    I don't see much benefit with the current ODI adaptors for planning if it is an EPMA type planning application.
    They have been specifically designed to work with classic planning applications.
    It certainly is possible to load into EPMA interface tables using ODI though there are no direct adaptors and it takes quite a bit of effect to get them into the correct format.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for