Are there any Final Cut Pro 4 conflicts with 10.3 Panther?

I just bought FLIP4MAC software which will allow me to save my Final Cut Pro 4 Quicktime movies as Windows Media Files (I make short comedy films), but neglected to see that it only works with 10.3 Panther. I've been running 10.2.8 for over a year and it doesn't have any conflicts with FCP 4 that I can see. I've purchased the 10.3 installation disks already. Any conflicts I should be aware of before I jump in and install?
Thanks.

AS long as ur not in the middle of a project, I'd go ahead and install.

Similar Messages

  • Final Cut Pro X conflicting with Logic Pro 9

    As soon as I installed Logic Pro 9, Final Cut Pro X keeps freezing. It launches normally, as soon I play an item from the event browser FCPX freezes.
    Anyone knows how to solve that?
    Thanks in advance

    Hi Kolbi,
    I have just experienced a similar problem: I recently performed a complete reinstall of my system and throught I would keep it simple by just running FCPX and LP9 (installed in that order). Unfortunately I found (yesterday) that FCPX behaves erratically. Have you found a way to solve your problem? If so please let me know.

  • Is there any final cut express 4.0.1 update available?

    Is there any final cut express 4.0.1 update available? I want a RELIABLE source to update this, preferably by APPLE, Inc.
    I'm VERY disappointed that APPLE does not have that on the website. I SUPPORTED you by buying a product and in return you do NOT have a place for us to install upgrades especially if consumers like me got a new laptop. That is just plain MEAN. I mean, REALLY.
    Thank you and I hope to get this as soon as possible.

    Final Cut Express was discontinued 3 years ago (June 2011).  It was replaced by Final Cut Pro X.
    FCE is no longer supported by Apple.  That does not mean it won't run on Lion, Mt. Lion, Mavericks or Yosemite, however with each successive upgrade to OS X it becomes less & less likely that FCE will be installable or even run properly after being installed, because it is so much older than the current versions of OS X.   That said, the FCE 4.0.1 update is still available through Software Update provided you already have FCE 4.0 installed on your Mac.  The 4.0.1 update is not available "publicly," meaning you can't search for it on Apple's website and find it; FCE 4.0 has to already be installed on your Mac and you have to update it via Software Update on your Mac.
    One forum contributor DID find a way to download the 4.0.1 update without using Software Update, see this thread -> Where can I download Final Cut Express 4.0.1?
    My advice is to move to Final Cut Pro X since you have a Mac running Mavericks (10.9.5).
    I understand your frustration at having purchased some software and now you can no longer use it.  However, obsolescence is a natural part of the technology world.  FCE is now obsolete and has been replaced by Final Cut Pro X.   If you have OS X Lion or any later version of OS X installed on your Mac, you should be looking at Final Cut Pro X.

  • Motion 3.02 - cannot open any final cut pro projects

    Please help. Motion won't open any Final Cut Pro projects, and I've been training to learn Motion, I'm stuck on this lesson because I can't open a FCP project. All FCP projects are greyed out when I go to Open in Motion, and even if I right click the project file and Open With and force Motion to, it cannot open the file. I can "Send To > Motion" in FCP and that works, but it's not the same.
    I have FCP 6.06, both are part of Final Cut Studio 2 Academic version. Not that my FCP version matters, because the CD provided in my Motion 3 training book gave me a (probably) FCP 6.0 project file, even when I updated it, it won't work. Not even my old old FCP files from previous versions can open with Motion.
    Much thanks.

    But it can be done the other way, perhaps you reads about that. Motion files can be imported into FCP and used just like regular clips.
    adam

  • I don't have any Final Cut Pro Sound Effects. Help Me

    I just Downloaded Final Cut Pro Yesterday, Today I Went To Check It Out And Noticed I didn't have any Final Cut Pro Sound Effects. Everyone says there is two folders with the same name, one grey one blue, but there both grey for me. I go into finder and there is no such folder anywhere.

    Final Cut Pro X Content v1.0
    http://support.apple.com/kb/DL1394   <<< click here.

  • Are there any new Macbook pro laptops coming out soon?

    Are there any new Macbook pro laptops coming out soon? Because if there are i will wait to buy one.

    Applecomputer53 wrote:
    Are there any new Macbook pro laptops coming out soon?
    There are always new MacBook Pro models coming out soon. However with current 2011 models you can install the faster, Rosetta program loving OS X Snow Leopard with a hack, instead of the new clitchy and unstable OS X Lion.
    So you have a choice now, but for not much longer. If you wait another 6 -8 months, Lion will be stable and more programs will be compatible with it.
    If this is your first Mac, I would wait. If you can do a simple hack with another Snow Leopard Mac, then you can opt to get one now and revert it to Snow Leopard and have a stable machine.
    Else take your chances with Lion.

  • Is there a Final Cut Pro update price? I have FCP 6

    Is there a Final Cut Pro update price? I have FCP 6

    No, FCP X is a completely different app and everyone has to pay the full price.
    No educational discounts etc.

  • Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

    Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
    I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

    Apple's web page has the requirements:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

  • Is final cut pro 6 compatible with snow leopard?

    Is final cut pro 6 compatible with snow leopard? I don't want to upgrade the OS if I lose FCP.

    DO NOT MAKE AN IRREVERSIBLE DECISION.   You should clone your startup drive so you can quickly return your system to it's previous state if there's a problem.  Although Nick is always right, do you really want to trust him (or me for that matter). 
    https://discussions.apple.com/docs/DOC-2494

  • Is Final Cut Pro 3 compatible with MAC OS 10.4?

    Is Final Cut Pro 3 compatible with MAC OS 10.4?
    867x2 Mirror Door G4   Mac OS X (10.4)  

    re:FCP3
    Some people purchase FCP3 and then the upgrade to FCP5. It is less expensive than purchasing FCP5 as a new install. You may be able to find a copy of FCP4.5HD out there as well for a low price.
    That being said, while some use FCP3 (or FCP4.5) with 10.4, 10.4.x and QT7.x. will be happiest with FCP5.
    re: burning.
    Once the file is exported as a quicktime DV file, iMovie does not care about the origin. It should work just fine. DVDSP gives you much more control and greater flexability in setting up menus, looks, operation etc, but is not required.
    Good luck.
    x
    Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • Will Final Cut Pro X work with Yosemite

    Will Final Cut Pro X work with Yosemite?

    me too version 10.8. It would have been nice to know yosemite was going to crap out my primary video editing software! I use this for my video editing for my business video production and it would have been nice to know ahead of time or here's a crazy idea how about the software developers who are making millions off final cut pro sales release a fix BEFORE apple roles out yosemite for free. I don't have time to chase down every blog in the world to see issues etc. The reason I bought a mac is I just need it to work so I can work on my business.

  • Will the new final cut pro x work with my Final cut pro version 6.0.6 data

    will the new final cut pro x work with my Final cut pro version 6.0.6 data

    Thanks Tom.
    So I will need  upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
    Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
    Roger

  • Captions Are Disappearing in Final Cut Pro X

    Here's my problem.  I'm currently using Final Cut Pro X to put together a 40 min movie.  This movie includes various video clips as well as still images.  Naturally there is a need for many captions/subtitles.  However, when I'm finished for the day and close everything out, the next day upon opening up Final Cut Pro X again, i've found that many of my captions have returned to the default view.  For instance, my caption may have said, "Johnny enjoys a day at the park."  But upon returning, it says "title."  I'm spending countless hours perfecting these captions only to find that they have to be redone.  This will be the third time having to do this.  The crazy thing is, not all of them do this.  What is the problem here?  Any help would be greatly appreciated.  I'm finding myself having to leave my mac on 24/7 in order to keep this from happening, but even that is impossible to continue. 

    I'm having exactly the same problem with a ten minute movie.
    Some captions revert to "title" and keep the formatting that I'd set. Some revert to the default font and size.
    A very few of them are saved as I created them.
    If I had the responsibility of saving my work as I go along, I could blame myself if changes weren't saved, but the program is supposed to be keeping track of every change I make.
    Very frustrating.
    Help please.

  • Livetype files are pixelated in final cut pro

    everytime i make livetype graphic it get pixelated or distorted in final cut pro 6.0.6 when i put it in the sequence it looks fine in the viewer. i have never had this issue before and have tried everything i can think of.

    LiveType defaults to 720x486, in FCP, DV is 720x480. If you import the .ipr LiveType project directly, or render a movie out and bring that in, FCP will resize it to fit, resulting in a somewhat blurry movie. Double click on your LiveType clip in you Timeline, then in the viewer, check the Motion tab to ensure it's at 100%, and that any offset is an integer.
    Patrick

  • Because of the new final cut pro x update with photoshop capability, does that mean 3d objects are now compatible with final cut pro x

    Does Final Cut Pro X now support 3d models or objects because of the update with photshop capability?

    When you import a 3D model in Photoshop, it is imported as a Layer (smart object). And, yes, you can edit 3D objects in Photoshop and import them into FCPX—AS a photohop image (you cannot manipulate the 3D nature of the object in FCPX.) You can however create an animation in PS, convert to layers from frames and import that into fcpx. You can then edit the compound clip created to make use of those "animated" layer/frames. (I'm not sure how far I'd "push it" though...fwiw, at that point, it might be better to export the animation from PS and import the MOV into FCPX.)
    You can also make edits in PS after the psd is imported and fcpx will do live updates (after saving the psd file, of course.) 3D objects in PS are a special kind of Smart Object, and Smart Objects will translate to Motion and FCPX (they will be rasterized as a single layer, though.)

Maybe you are looking for