Are there any firmaware updates for time capsule?

Question

Are there any firmware updates for Time Capsule/Time machine?
I just had a new hybrid (SSD and spinning disk) drive (750 GB) installed on my MacBook Pro and used Boot Kamp to partition it and run Windows xp. Now, my previously working Time Machine won't function. It says the "sparsebundle" is open (or in use)  preventing the back-up from working properly. When I try and remove and re-install Time Capsule as the disk to back-up to, it still doesn't work. My plan "B" is get a second Time Capsule and dedicate it to the MacBook. But, I fear I'll face the same problem.
When I open to reconfigure Time Machine, the Time Capsule disk is identified as the back-up, but it's also seen in the "available disks to use for back-up" along with with Boot Kamp disk which is part of the new SSD hybrid hard drive just installed. (Remember it's the partitioned part running Windows xp.)
I've unplugged/plugged-in the ethernet internet connection and the power cord many times to no avail. The message still says the sparsebundle is in the way.
Do you think deleting Boot Kamp disk from the list of available hard drives might solve the problem?
Bill in Tulsa

Answer 1

TM can only use AFP and only on disks formatted HFS+ (ie Mac Extended Journaled) so it should not bring up a boot camp partition as a possible destination at all .. but I have not done that seutp.
It says the "sparsebundle" is open (or in use)
That error is well known. It should simply required the TC to be restarted..
That sometimes gets things working where the simple restart won't.
I would recommend using short names, with no spaces and pure alphanumeric. 
That is C9
http://pondini.org/TM/Troubleshooting.html
If you have a more complicated setup.. I would recommend firstly doing a TM reset in the computer.
See A4 in the same reference.
Do a verify then of the sparsebundle on the TC.. A5 but you might need to inherit the old backup if you want to continue an old backup.. A new hard disk will make the TM consider the old backup no longer belongs to the computer.. there is a UUID connection to the actual hard disk used in the backup.
Again read the info in pondini. B5 and B6.
The sparsebundle in use is C12 but there are a number of sparsebundle issues in section C.. C17 is another common issue.
Some of what you have done is not adequate.. eg disconnecting ethernet is not enough.. you need to reboot the TC.