Are there any ill effects for turning up brightness all the way?

Are there are any ill effects or long term effects if you turn up and leave the monitor's brightness at full? I'm not worried about the battery draining or anything, I'm just wondering if it wouldn't be as bright two years down the road compared to if just always left the brightness at it's automatic setting. Thanks for your help,
Tom

Having your display at full brightness does speed up the natural decay of your display's maximum brightness over time. So, someone who has their display at 50% all of the time will have a better maximum brightness after two years than someone who had their display at 100% over the same period.
However, I would suggest you just use your display as you want to. I normally have mine at 75% as 100% is actually too bright for me.

Similar Messages

  • Are there any ill effects from removing Garage Band?

    Can I uninstall Garage Band with no ill effects to my operating system?  I don't want it--but if I'm going to mess something up by removing it, I'll leave it.

    No problem at all. Drag the Garageband icon from the Applications folder to the trash, then go to Macintosh HD > Library > Application Support and drag the Garageband folder from there to the trash.
    Similarly with your home folder > Library > Application Support > Garageband.
    In home folder > Library > Preferences there are 3 plist files;
    It doesn't matter if you leave them, as they use little space, but trash them if you're comfortable doing so.
    Apple Loops;
    There's also a Garageband folder in home > Music
    Macintosh HD > Users > shared > GarageBand Demo Songs.
    Also any third party loops (Dance Packs etc.) which may be lurking in your home folder or Applications folder. (Only if you've installed them).
    Might be a few other bits scattered around, but nothing to worry about.

  • Are there any Color Adjustments for Safari?  Printing with Magenta overlays.

    Are there any Color Adjustments for Safari?  When printing the iphone at www.apple.com/iphone/compare-iphones/ the phones have a Magenta Overlay on them.  Tried Firefox and Chrome with same computer, plus a PC to the same printer.  All else prints fine.  Have Intel based iMac, updated to 10.7.5, and using Safari 6.0.1.  I called Canon, and they said it is an issue with Safari.  Any Solutions?  Any way of replacing Safari?  (Recently updated to Lion via software downloads.  No disc.)

    Welcome to Apple....
    Kumusta Ka?  Ma init pa dyan?
    If you're browsing the web and you're internet connection is slow or sometimes dropping, it is normal for Safari to hang or freeze for a little bit until it connects to the site you're trying to view or visit.
    Try this - go to system preferences - network - advance - dns and change your dns server.
    see image below - let me know if na ayos mo na ang internet mo.

  • Is there any retro effect for this changes we made in 2001 Infotype for

    HI Experts...
    Please advice me on the follwing absence issue.
    In my clients company.... .... one of Personnel areas employees Earned leave records are not updating in 2001 Infotype from the begining.
    Now they wish to have to update in 2001 Infotype.
    What  are the  Retro effects after updating the EL s in 2001 IT for previous dates.
    Is there any retro effect for this changes we made in 2001 Infotype for the past dates.
    We dont need retro effected from those changes.
    Please advice...
    Sai.

    HI Vincent....
    Thanks for the reply.
    Last month professional tax rates were shown up correctly only.
    For the employees slab rates are similar  that is  200 per month.
    Last month professional  tax rates  were correct only.
    For the current month also the prof tax amount is showing up correctly only.
    Please advice to get the professional tax amount in the payslip.
    Regards,
    V Sai.

  • I do not want Creative Cloud. My current version of Lightroom is 5.7. I take it I have to buy Lightroom 6 outright? Are there any price concessions for upgrades?

    I do not want Creative Cloud. My current version of Lightroom is 5.7. Are there any price concessions for upgrades or do I have to buy Lightroom 6 outright?

    @landaloons who posted: "Clicking 'Checkout' does nothing.  There is apparently no way to get the upgrade at present."
    Your browser has to have tracking enabled and open a pop-up for Checkout to work. Browser add-ons and custom settings can block this from happening.  In Firefox I had to temporarily disable Ghostery to advance past the Checkout button. You may have a similar tracker/pop-up disabler in your browser that you need to turn off temporarily. Alternatively try a different browser with no custom settings. Doing this I was able to download and install a $79.99 upgrade version, so it does work, but they don't make it easy to find or do. They want you to subscribe instead. (In fairness, though, you'd have this same Checkout issue trying to subscribe to CC if your browser settings block advancement past the Checkout button.)

  • Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

    Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
    I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
    Reference: http://www.securityresearch.at/en/development/fortify/
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Hi Amalaraja Fernando,
    I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
    SharePoint diagnostic manager
    SharePoint enterprise manager
    What is SPCop SharePoint Code Analysis?
    Dmitry
    Lightning Tools Check
    out our SharePoint tools and web parts |
    Lightning Tools Blog | Мой Блог

  • Are there any JDBC Drivers for SQL Server 2000?

    Hello Everyone,
    Any news on the JDBC drivers for SQL Server 2000? I know it is not
    certified yet but is there a date when it will be.
    Which versions of WLS will they work with? Any help is appreciated.
    Sincerely,
    --Luis

    Hello Michael,
    Any news on the JDBC drivers for SQL Server 2000? I know it is not
    certified yet but is there a date when it will be.
    Which versions of WLS will they work with? Any help is appreciated.
    Sincerely,
    --Luis
    "Michael Girdley" <[email protected]> wrote in message
    news:3a6549bb$[email protected]..
    Not yet, but they will appear on the web site in about two weeks.
    Thanks,
    Michael
    Michael Girdley, BEA Systems Inc
    Learning WebLogic? Buy the book.
    http://www.learnweblogic.com/
    "Stefano Picozzi" <[email protected]> wrote in message
    news:[email protected]..
    Are there any JDBC Drivers for SQL Server 2000 for Weblogic Server.

  • Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

    hello
    are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

    You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

  • Are there any firmaware updates for time capsule?

    Are there any firmware updates for Time Capsule/Time machine?
    I just had a new hybrid (SSD and spinning disk) drive (750 GB) installed on my MacBook Pro and used Boot Kamp to partition it and run Windows xp. Now, my previously working Time Machine won't function. It says the "sparsebundle" is open (or in use)  preventing the back-up from working properly. When I try and remove and re-install Time Capsule as the disk to back-up to, it still doesn't work. My plan "B" is get a second Time Capsule and dedicate it to the MacBook. But, I fear I'll face the same problem.
    When I open to reconfigure Time Machine, the Time Capsule disk is identified as the back-up, but it's also seen in the "available disks to use for back-up" along with with Boot Kamp disk which is part of the new SSD hybrid hard drive just installed. (Remember it's the partitioned part running Windows xp.)
    I've unplugged/plugged-in the ethernet internet connection and the power cord many times to no avail. The message still says the sparsebundle is in the way.
    Do you think deleting Boot Kamp disk from the list of available hard drives might solve the problem?
    Bill in Tulsa

    TM can only use AFP and only on disks formatted HFS+ (ie Mac Extended Journaled) so it should not bring up a boot camp partition as a possible destination at all .. but I have not done that seutp.
    It says the "sparsebundle" is open (or in use)
    That error is well known. It should simply required the TC to be restarted..
    That sometimes gets things working where the simple restart won't.
    I would recommend using short names, with no spaces and pure alphanumeric. 
    That is C9
    http://pondini.org/TM/Troubleshooting.html
    If you have a more complicated setup.. I would recommend firstly doing a TM reset in the computer.
    See A4 in the same reference.
    Do a verify then of the sparsebundle on the TC.. A5 but you might need to inherit the old backup if you want to continue an old backup.. A new hard disk will make the TM consider the old backup no longer belongs to the computer.. there is a UUID connection to the actual hard disk used in the backup.
    Again read the info in pondini. B5 and B6.
    The sparsebundle in use is C12 but there are a number of sparsebundle issues in section C.. C17 is another common issue.
    Some of what you have done is not adequate.. eg disconnecting ethernet is not enough.. you need to reboot the TC.

  • HT201541 are there any new templates for Motion 5 since Motion 4?

    are there any new templates for Motion 5 since Motion 4?

    Hello and good day.
    Yes there are many more templates and with the latest Motion Update we now have 3D Text Templates.
    Plus you can always find new freebies being released here: http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
    There are also many 3rd party developers that create Motion Templates as well for Motion 5.
    Also, you can create your template with the ability to add many different parameters to control from inside of FCPX.
    Please let me know if you have any questions.  Have a great day!

  • HT1222 Are there any security updates for the Mac OS 10.4.11?

    Are there any security updates for my G4 PowerPC OS 10.4.11?

    No. Tiger is an obsolete and unsupported OS at this point. If there were any updates you would find them using Software Update.

  • HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    No.
    You must restore.

  • Are there any bluetooth adapters for ipod classic to use a speaker?

    are there any bluetooth adapters for ipod classic to use a wireless speaker?

    I know there are a few different bluetooth adapters out there that add bluetooth hardware capability, but I'm not sure of what's available for compatible bluetooth speakers.
    Here is one such bluetooth adapater.
    http://www.buy.com/pr/product.aspx?sku=218214010&sellerid=30193374
    B-rock

  • Are there any user exit for ess travel?

    Hi all
    I want to ask,
    are there any user exit for ess travel?
    and if I want  to know if we already had enhancement for back-end system (sap gui)
    is it automatically applicable to ess too?
    many thanks

    check this
    ESS: BAdi for Checking Mileage
    Thanks
    Bala Duvvuri

  • After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    Try to reset the iPod by  pressing the home and sleep button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset, but it can clear some glitches after installing new software or apps.

Maybe you are looking for

  • Capture .bmp from hidden desktop

    Hi , I'm trying to capture a desktop created with the "CreateDesktop" methode. But I have some problems. I only get the capture .bmp from the desktop, when it is active. This desktop runs on vm,and I connect to it through remote desktop. Well, as I s

  • Visa resourse missing in pda module

    i am creating a simple read and write ,rs232 program and then generating exe file from labview mobile module.when i am trying that exe file to run in wince compatible arm board , the com port controller(VISA RESOURCE) of VISA  is not visible.how to c

  • Indesign CS6 trial version installation failling

    Hi, I'm trying to install a trial version of Adobe Indesign CS6 on a (2009) Mac mini 2.26 Ghz Core 2 Duo with 4Gb Ram. The internal hard drive still has 18Gb free space that should be enough to install just indesign. I tried several times (after rebo

  • How can I get my CLIP working?

    I'm trying to figure out how to use CLIP with Labview FPGA 8.6. I've created a small vhdl file and matching xml file. For some reason, simulation shows the output vector as random data. Output is stuck at zero when I run it on my PXI-7811R. I wonder

  • When downloading ios 5 to my itunes an error message saying "the network connection has timed out" keeps popping up. how do i fix this?

    when downloading ios 5 to my itunes an error message saying "the network connection has timed out" keeps popping up. how do i fix this?