Are there any issues with Mavericks OS with Office for Mac

Has anyone had any problems using Office for Mac software on the new Mavericks OS 10.9
(Macbook Pro)?

I have been having MAJOR problems with outlook office Mac 2011 and Mavericks (Macbook Pro Retina early 2013).
The issue seems to be intermittent with POP and IMAP email accounts, and I suspect it may be related to the keyring and outlook mac 2011 interactions with the keyring.
Intermittently my POP and IMAP accounts refuse to work, and I get asked to re-enter the password (and did I want to save it in the keyring) when I already did that.
A suggestion over on the Microsoft Office Mac forum was to delete the account and re-enter it (credentials for the POP and IMAP) into Outlook.  Did that, and still having intermittent issues.
This is causing be considerable GRIEF as I rely on these email accounts for time critical business issues, and failing to get emails is a disaster for us!
Word, Excel and PowerPoint all appear to be behaving ok under Mavericks so far, but Outlook is proving to be quite difficult!!!
Anyone else with these experiences???
Apple Support are you watching???
Thanks, IanB
Australia

Similar Messages

  • Are there any issues with using OS X Mavericks and Premiere CC?

    Are there any issues with using OS X Mavericks and Premiere CC?

    Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Peter Garaway
    Adobe
    Premiere Pro

  • Are there any issues with Maverick and Canon Pro10 printers

    Are there any issues with Canon Pro10 printers, Dymo 450 LaserWriter and Epson SX400 with the new Maverick?

    Try searching these forums and "Googleing" those devices on the web.....
    Barry

  • I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
    http://support.apple.com/kb/TS1398
    Regards.

  • Are there any issues with changing IP address of an ACS v5.3 system after initial setup?

    I am migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the original 4.2 machine so I don't have to change any configs on the network devices.
    Are there any issues with changing the v5.3 system IP address AFTER the initial setup?

    I tried it without a problem. I changed the ip address of the WLC many times.
    You have to make sure though that:
    1-) You change the switchport accordingly to the appropriate vlan if the new ip belongs to a subnet of a different vlan.
    2-) Make sure that all AAA clients configured to use the new IP address of the ACS servers.
    Here is the procedure how to change the ip of the interface (as per cisco doc):
    http://goo.gl/0BYqVT
    I changed also by normal ip address command and it works. but of course the server must be standalone before doing that step (i.e. no secondary ACSs registered to it and it is not registered to other ACSs in a distributoin).
    HTH
    Amjad

  • Are there any issues with itunes where as certain windows looks like a PC in safe mode?

    are there any issues with itunes where as certain windows looks like a PC in safe mode?

    Check your trash. I had some old uninstalled files in there. Deleted and restated itunes. seems to work.

  • Are there any standar iview that works with transaction Ad-hoc Query?

    Are there any standar iview that works with transaction Ad-hoc Query?
    So, I want the same iview for the various querys.
    Are there any iview how this?

    I am working with Portal and HR.
    Now, we are looking for to make a query, get the generated code, and insert it in a rfc. So, i could make a java web dynpro and call the rfc. But this is not the best solution.
    My question is about are there any standard iview for this scenario.
    Do you know?

  • I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 1.5TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.

    I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 3TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.

    Downgrade Lion/Mountain Lion to Snow Leopard
      1. Boot from your Snow Leopard Installer Disc. After the installer
          loads select your language and click on the Continue
          button. When the menu bar appears select Disk Utility from the
          Utilities menu.
      2. After DU loads select your hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status
          of the drive in DU's status area.  If it does not say "Verified" then
          the drive is failing or has failed and will need replacing.  SMART
          info will not be reported  on external drives. Otherwise, click on
          the Partition tab in the DU main window.
      3. Under the Volume Scheme heading set the number of partitions
          from the drop down menu to one. Set the format type to Mac OS
          Extended (Journaled.) Click on the Options button, set the
          partition scheme to GUID then click on the OK button. Click on
          the Partition button and wait until the process has completed.
      4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
    If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

  • I want to buy a 2nd iPad for my wife. we both have kindles and I have the kindle app for my iPad.  are there any issues or concerns in adding a 2nd iPad to the iTunes account

    I want to buy a 2nd iPad for my wife.  we both have kindles and i have the kindle app for my iPad. are there any issues or concerns in adding a 2nd iPad with kindle app?

    You can sync as many iDevices as you own to a single iTunes library if you want to do so. If you manage the content manually, you can pick and choose the apps, music, videos and so on that you want on each device. One iTunes account means using the same Apple ID to purchase and update all of your apps. You can share apps on both devices because once you buy an app, you can download it to all of your iDevices - as many times as you want - using the same Apple ID and iTunes account. If you decide to do this, you have to sync to the same computer each time in order to keep all of your shared apps in the one iTunes library.
    The Kindle App content is not synced to the iTunes library. It is controlled by your Kindle account. I believe that you can go into your Kindle account and transfer your purchase to your other devices - iPad, computer, etc. You can both have the Kindle app on your iPads and share the content as far as I know, so I see no conflict there. However, while I do have the Kindle app and an account, I do not use it very often.
    If you want to share the one iTunes account, there should be no problems with a second iPad. I sync my iPad, my iPod Touch and my wife's iPod Touch to my MacBook using the same iTunes library and we have different content on all three devices. My daughter uses my iTunes account for her iPod Touch and syncs to her own MacBook and her own iTunes library.
    Four devices using one iTunes account syncing to two different iTunes libraries.

  • Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
    trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
    The problem was the separated System Reserved Partition. After I removed using this instructions:
    http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
    The upgrade ran ok, and now have my DC as Windows 2012 R2.
    Hope that helps!.

  • Are there any issues with Adobe Photoshop CS5 and OS X Yosemite 10.10?

    Are there any known issues with Adobe Photoshop CS5 and OS X Yosemite 10.10? I heard I would need an older Java version to start it.
    [ spammy links removed by admin ]

    You'll need to reinstall Photoshop CS5 after installing the MacOS 10.10 update -- for some reason the OS updater stomps on some of the Photoshop files.

  • Are there any issues with MacPros+Dual Displays and FCP?

    I have a MacPro (2.1) with an ATI X1900XT graphics card (2 DVI ports). It is currently hooked up to a single 24". My usage is mostly Browsing, Final Cut Suite and Video. I am planning on upgrading to Dual Displays (2*24" or 2*27") but read about some vague issues the ATI might have when using dual displays and FCP (Color more specifically). Are there any specific issues I should be aware of before getting a second display?
    Many thanks in advance

    One graphics card? Two displays? ZERO ISSUES! Not sure what "vague issue the ATI" cards have, but I have that exact card, and run two 24" displays with no problems. I have run dual displays for years. I find working with one very...cramped.
    Shane

  • Are there Any Charting solutions that works with JDeveloper/ADF?

    Are there any Charting solutions ( e.g. barchart, piecharts, etc) that works with JDeveloper / ADF ?

    This question came up here once before. I think the conclusion is: No, not with vanilla ADF. However, if you're interested, the thread did mention some other library you might want to try.
    Good luck,
    Brian

  • Are there any issues regarding running Labview on Windows Vista

    I am a cognitive psychology graduate student, and I am considering switching to LabView to display stimuli and gather RT data. I have previously used E-Prime for this task, but E-Prime doesn't seem to run well with Windows Vista. Are there any known issues regarding running LabView with Windows Vista?
    Thanks
    Chris 

    I've had no problems on Vista*. Only issue I've had was concerning how Vista uses fonts, but if you start on Vista and don't switch between XP and Vista, etc., then you'll be OK.
    *no problems with LabVIEW's compatibility with Vista. Now, Vista in general, that's another story and not for this thread/forum.
    Richard

  • Are there any issues when using AirPlay on an Apple TV that is using a shared internet connection?

    I am currently in a hotel and I have my MacBook Pro, iPad, and Apple TV (2nd gen). The hotel I'm in has both wired and wireless internet connections. I cannot directly connect my Apple TV to either connection because the hotel connections require you to agree to some terms and conditions that the Apple TV can't access. To further complicate things the ethernet connection in my room doesn't work at all. So the solution I found to at least connect the Apple TV to the internet was this: using my MacBook Pro, I connected to the hotel wireless connection (to bypass the hotel internet's T&C). I then shared that wireless connection via ethernet to the Apple TV. It works. I can watch YouTube and Netflix but I can't take advantage of AirPlay. I've updated, restored, and reset the Apple TV numerous times, but no luck. Are there any settings or connections I'm missing?

    Airplay from what?  iTunes or iPad?
    I assume iPad - in this setup the iPad and AppleTv will be unlikely to be able to see each other on the hotel network even if both are connected wirelessly.  If they can and you don't have a user/room  specific login I'd be concerned about other users seeing my devices too.   These things are generally designed for single user access not to create your own local network.  I suspect in the T&Cs for the wi-fi service it may preclude sharing the internet connection with another device, but if it works....

Maybe you are looking for

  • I recently upgraded to OSX Leopard, now safari won't work at all.

    After installing successully the OSX 10.5.6 on two of my HDs, I went to "Software Update" and received 7 updates.  It was late, and I accepted the install, and went to bed.  this morning it [safari] doesen't work any way I can think to use it. I upda

  • ITunes wont run

    I can download and install itunes, the icons appear but itunes and quicktime will not run - 64 bit win7

  • Graph control causes general protection fault when changing axis range (64bit)

    Hello, i wrote a 32bit application which i'm porting to 64bit now and stumbled across a problem with the graph control. The Graph axsis are set to editable so that the user can change the axis range manually at runtime. The 32bit version has no probl

  • How to test the adapter ?

    Hi When you create an adapter it would be inactive in adapter monitoring and it would be active only when atleast one message is passed through it ? how do we test the adapter is working fine or not ?

  • Mighty Mouse bluetooth disable after computer shuts down

    I looked for a solution on the forum and could not find it yet. I have a Mighty mouse connected to my G5 Mac tower for almost a year and never had a problem. Now since last week, every time I shutdown the computer it disables the bluetooth hardware.