Are there any keyboard shortcuts for navigating conversation view?

In sparrow- which I'm coming over from due to it's support of Gmail, you can use various keyboard shortcuts to move back and forth in the thread.
I prefer the Mail layout, but might have to go back if I have to click everywhere!

Some other commands that can make it easier to work with layers:
Frame and Layer Utilites: contains a number of commands for working with layers, like hiding the current layer in all other states but the current one, or moving the layer up or down in the panel. Any of the commands can be assigned keyboard shortcuts. http://johndunning.com/fireworks/about/FrameLayerUtils
QuickFire: lets you quickly match a layer by typing part of its name and then hiding it, locking it, etc. http://johndunning.com/fireworks/about/QuickFire
Solo Selection: hides all elements except the selected ones, so you can work on just a part of the document. Run it again to make everything visible again. http://johndunning.com/fireworks/about/SoloCommand
I'm also working on a command that will you navigate the elements in a doc via the keyboard, which should be ready soon.

Similar Messages

Is there any keyboard shortcuts for navigating through Fireworks layers? Yes there are!

Since I couldn't find a way to post a reply on the original question I decided to create my own discussion on this.
The "alt" key is your best friend when working with layers.
Alt click on show/hide, lock/unlock, and expand and collapse arrows will apply to all.
Example: Lets say you have 20 layers, all unlocked, it is starting to become extremely difficult to select just a single item from a single layer. If you alt click any layer, all your layers will become locked, then you can easily just unselect the layer that has your content in it. Alt clicking again unlocks all your layers. (*note - sometimes sub-layers remain locked even when the parent is unlocked).
Again this works with the show/hide and the expand and collapse toggles as well.
In addition I wrote a command and assigned a shotcut key to it that lets you do several very useful layer interactions with one shortcut key.
My command lets you:
1) Copy all your selected objects (regardless of what layer they are in),
2) Creates a new layer
3) Opens the name layer dialog so that you can name your new layer
4) Paste al your selected objects into your new layer.
You can find this comman here with instructions how to install it and how to set up a shortcut key for it). *Note this command is used with John Dunnings (johndunning.com) layers command.
http://fireworksinstructionalvideos.com/commands/NewLayerCloseOthers.zip
Video here: http://fireworksinstructionalvideos.com/tutorials/index.html

Some other commands that can make it easier to work with layers:
Frame and Layer Utilites: contains a number of commands for working with layers, like hiding the current layer in all other states but the current one, or moving the layer up or down in the panel. Any of the commands can be assigned keyboard shortcuts. http://johndunning.com/fireworks/about/FrameLayerUtils
QuickFire: lets you quickly match a layer by typing part of its name and then hiding it, locking it, etc. http://johndunning.com/fireworks/about/QuickFire
Solo Selection: hides all elements except the selected ones, so you can work on just a part of the document. Run it again to make everything visible again. http://johndunning.com/fireworks/about/SoloCommand
I'm also working on a command that will you navigate the elements in a doc via the keyboard, which should be ready soon.

Is there any keyboard shortcuts for navigating through Fireworks layers?

By default, there are no keyboard shortcuts. However, you can use custom commands. For example, http://johndunning.com/fireworks/about/FrameLayerUtils

Some other commands that can make it easier to work with layers:
Frame and Layer Utilites: contains a number of commands for working with layers, like hiding the current layer in all other states but the current one, or moving the layer up or down in the panel. Any of the commands can be assigned keyboard shortcuts. http://johndunning.com/fireworks/about/FrameLayerUtils
QuickFire: lets you quickly match a layer by typing part of its name and then hiding it, locking it, etc. http://johndunning.com/fireworks/about/QuickFire
Solo Selection: hides all elements except the selected ones, so you can work on just a part of the document. Run it again to make everything visible again. http://johndunning.com/fireworks/about/SoloCommand
I'm also working on a command that will you navigate the elements in a doc via the keyboard, which should be ready soon.

Is there any keyboard shortcut for Lift & Stamp?

I would like to know if there´s any keyboard shortcut for "Lift and Stamp". Something like "copy and paste".

no prob ... just know that that way will lift and
stamp ALL current adjustments ...
to selectively do it, just uncheck the other
adjustments you dont want L&S'd ...
i routinely use this method and rarely use the lift
HUD ('O') ...
Exactly, I find this method very useful in my work.
Regards.

HT1518 Are there a keyboard shortcuts for the alt or option symbol ⌥ and the cmd ⌘ symbol ?

Is there a keyboard shortcut for the alt or option symbol ⌥ and the command symbol ⌘? I need this a lot to take notes from tutorials etc. I know I can copy them from other text or access the special character menu, but I would love to have a easier shortcut.

You can try making one for yourself via system preferences/keyboard/text/symbol and text substitution

Are there any keyboard apps for other apps

I was wandering if there are any keyboard apps for other apps e.g for typing cheats

An app I am looking to use a keyboard on is gta 3 anniversary edition

Are there any keyboard shortcuts in Word?

Is there any way to go down or up a whole screen or page in a Word document using just the keyboard? Or to go to the end or back to the beginning of a document? I can't find a way, and it's frustrating having to go to the scroll bar each time. I know there's iScroll and Side Track, but I'm hoping there's something that's native Apple. Thanks for any suggestions.
Cheers, Peter

Hi peter,
well I don't know if there is a shortcut to go directly to the end, but to scroll down quite quickly I press fn+down/up.
I don’t know if that can be useful but I sometimes use it.
Cheers

Is there any keyboard shortcut for exection?

I query a lot of sql statements and I would like to know if there is a keyboard shortcut to execute queries.I use SHIFT+arrow keys to highlight,makes it more easier ...anyone has an idea?

ctrl+f5 for parsing the query set
F5 or ctrl+E for execution
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

Is there any keyboard shortcut for inserting picture in Powerpoint for mac 2011.

Hi,
Apologies as I did not know where to post this question and consequently ended up being here.
Please guide with the question and how to get the exhaustive list of Office 2011 keyboard shortcuts. Thanks.

Hi
I dont know of a shortcut for inserting a picture have never come across one for this function.
Here is a list of the shorcuts for powerpoint mac
http://office.microsoft.com/en-gb/mac-powerpoint-help/powerpoint-keyboard-shortc uts-HA102929488.aspx
Hope this helps

Is there a keyboard shortcut for the arrows in grid view?

When you click on an album (or TV-show) in grid view there are two small arrows in the upper right corner, for flicking through to next or previous album.
Question: is there a keyboard shortcut for these arrows? Would be relly nice...
I mean these buttons: http://dl.getdropbox.com/u/2205425/itunes_pilar.png

Ah this is useful!
However... it turns out that you have to press shift as well, so:
For left: ⇧⌘ [ (meaning SHIFT - COMMAND - LEFT SQUARE BRACKET)
For right: ⇧⌘ ] (meaning SHIFT - COMMAND - RIGHT SQUARE BRACKET)

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
Reference: http://www.securityresearch.at/en/development/fortify/
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

Hi Amalaraja Fernando,
I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
SharePoint diagnostic manager
SharePoint enterprise manager
What is SPCop SharePoint Code Analysis?
Dmitry
Lightning Tools Check
out our SharePoint tools and web parts |
Lightning Tools Blog | Мой Блог

Are there any JDBC Drivers for SQL Server 2000?

Hello Everyone,
Any news on the JDBC drivers for SQL Server 2000? I know it is not
certified yet but is there a date when it will be.
Which versions of WLS will they work with? Any help is appreciated.
Sincerely,
--Luis

Hello Michael,
Any news on the JDBC drivers for SQL Server 2000? I know it is not
certified yet but is there a date when it will be.
Which versions of WLS will they work with? Any help is appreciated.
Sincerely,
--Luis
"Michael Girdley" <[email protected]> wrote in message
news:3a6549bb$[email protected]..
Not yet, but they will appear on the web site in about two weeks.
Thanks,
Michael
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Stefano Picozzi" <[email protected]> wrote in message
news:[email protected]..
Are there any JDBC Drivers for SQL Server 2000 for Weblogic Server.

Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

hello
are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

Are there any firmaware updates for time capsule?

Are there any firmware updates for Time Capsule/Time machine?
I just had a new hybrid (SSD and spinning disk) drive (750 GB) installed on my MacBook Pro and used Boot Kamp to partition it and run Windows xp. Now, my previously working Time Machine won't function. It says the "sparsebundle" is open (or in use) preventing the back-up from working properly. When I try and remove and re-install Time Capsule as the disk to back-up to, it still doesn't work. My plan "B" is get a second Time Capsule and dedicate it to the MacBook. But, I fear I'll face the same problem.
When I open to reconfigure Time Machine, the Time Capsule disk is identified as the back-up, but it's also seen in the "available disks to use for back-up" along with with Boot Kamp disk which is part of the new SSD hybrid hard drive just installed. (Remember it's the partitioned part running Windows xp.)
I've unplugged/plugged-in the ethernet internet connection and the power cord many times to no avail. The message still says the sparsebundle is in the way.
Do you think deleting Boot Kamp disk from the list of available hard drives might solve the problem?
Bill in Tulsa

TM can only use AFP and only on disks formatted HFS+ (ie Mac Extended Journaled) so it should not bring up a boot camp partition as a possible destination at all .. but I have not done that seutp.
It says the "sparsebundle" is open (or in use)
That error is well known. It should simply required the TC to be restarted..
That sometimes gets things working where the simple restart won't.
I would recommend using short names, with no spaces and pure alphanumeric.
That is C9
http://pondini.org/TM/Troubleshooting.html
If you have a more complicated setup.. I would recommend firstly doing a TM reset in the computer.
See A4 in the same reference.
Do a verify then of the sparsebundle on the TC.. A5 but you might need to inherit the old backup if you want to continue an old backup.. A new hard disk will make the TM consider the old backup no longer belongs to the computer.. there is a UUID connection to the actual hard disk used in the backup.
Again read the info in pondini. B5 and B6.
The sparsebundle in use is C12 but there are a number of sparsebundle issues in section C.. C17 is another common issue.
Some of what you have done is not adequate.. eg disconnecting ethernet is not enough.. you need to reboot the TC.

HT201541 are there any new templates for Motion 5 since Motion 4?

are there any new templates for Motion 5 since Motion 4?

Hello and good day.
Yes there are many more templates and with the latest Motion Update we now have 3D Text Templates.
Plus you can always find new freebies being released here: http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
There are also many 3rd party developers that create Motion Templates as well for Motion 5.
Also, you can create your template with the ability to add many different parameters to control from inside of FCPX.
Please let me know if you have any questions. Have a great day!

Are there any keyboard shortcuts for navigating conversation view?

Similar Messages

Maybe you are looking for