Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

To answer the obvious question. No. None that I've seen. But it may depend on what you mean exactly?
Connecting to file sharing service - None that I've seen
Connecting to Open Directory (assuming proper configuration) - None that I've seen
Using the Server's Mail Service (assuming proper configuration) - None that I've seen
I can say the same about anything else the Server may or may not be offering.

Similar Messages

TS3048 are there any known issues with the magic mouse? i believe mine is buggy and has been crashing Logic

mac pro quad core 2.8Ghz Lion 10.7.4 12 GB ram
magic mouse behaves very erratically; seems buggy and tracks slow. will crash Logic when rubber-banding or moving events in piano roll edit windeo. very frustrating. have not been able to duplicate this crash using my old wired mouse (from my G4)
someone at a Mac store suggested i may have a"bad" mouse... what gives? any help would be appreciated. i will be happy to replace the mouse if that is the issue...robert

Hello,
In answer to your question, I have not heard of any "known problems."
The device may, indeed, be faulty. Try resetting the PRAM and SMC before you buy a new one.
Barry

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Welcome to Apple Support Communities
Most of the applications compatible with Lion are also compatible with Mountain Lion, so you shouldn't have any problem. Mountain Lion supports the latest update for Parallels 7 and 8, so if you haven't got one of these versions, you should upgrade it before upgrading Mac OS X. That application uses extensions, so it may cause kernel panics

Are there any known issues when using PSE 13 after installing Apple's recent 10.10.3 Combo update for Yosemite?

I've had Yosemite for some time and bought/installed PSE 13 afterwards.
In the last few days I upgraded to Yosemite 10.10.3.
As a PSE 13 novice I've been working my way through "Adobe Photoshop Elements 13 - Classroom in a Book". Working through the exercises I've found my iMac is sometimes taking longer to process the functions I'm using than prior ro the 10.10.3 upgrade. E.g., using the Healing Brush tools, Straighten Tool etc.
I've struggled with Apple's upgrade and had to re-install my machine from a previous Time Machine Backup and so I was wondering:-
Are there any known issues with PSE 13 post 10.10.3 upgrade?
Are there things I should be concerned about in the future before accepting an OS X upgrade?
Thanks,
Andy

No, no known issues. However it's a good idea to always delete preferences after OS X system updates.

Are there any known issues when updating to iLife 9.12

I am getting a notice to update iLife to 9.12. Are there any known issue with this release?

Yes. There are issues with syncing to iOS devices. These are fixed in 9.1.3, so update to 9.1.2 an then to 9.1.3
Regards
TD

Are there any known issue with the HP 3005pr USB 3 replicator ?

Hi,
I recently ordered an HP laptop Pavilion dv6t-7000 with Intel i7 and nVidia video. While the unit isn't due to arrve for about 2 weeks, I'm looking for a docking station/port replicator.
Are there any known issues with the HP 3005pr USB 3 replicator ? Does it fully support Win7 64 bit? I am also considering the Targa U3 unit, but I'd prefer HP if I can be assured that it works.
I'd like to be able to leave the laptop closed when at my desk so I can use an external keyboard, mouse, and monitor.
Does HP make this device or does a 3rd party make it for them?
I've read so many stories on various forums regarding these things.
Any suggestions from HP or others? I need to order something soon, but I don't want head aches when it arrives.
thanks,
Steve

This HP USB 3.0 Port Replicator fully supports with Windows 7 64-bit, if that is the one that you are talking about.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Are there any known issues with running Keynote '09 on Mavericks?

Before I install Mavericks, I want to make sure I can maintain the full functionality of Keynote '09. Any known issues using the old program on the new system?

Hi OnceBeforeIDie,
Welcome to Apple Support Communities!
Take a look at the article below, it has some some tips that will resolve a performance issues like the one you described.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
-Jason

Are there any known issues concerning using DIGEST-MD5 SASL authentication with iPlanet Directory Server 5.0 on Windows NT 4.0?

I am developing support for the DIGEST-MD5 sasl mechnism on a c-ldap client. I am using the evaluation version of the iPlanet Directory Server 5.0 which lists DIGEST-MD5 as a supported SASL mechanism. The server is running on NT 4.0 After installing the Directory Server with the test database, a changed the passwordStorageScheme from the default of SSHA to clear text. I then added my test user. When I run my test I always get back a resultCode of 49 (invalidCredentials). The digest-challenge I receive from the server and my digest-response are shown below. I have satisfied myself that the calculation of the response directive in the digest response is correct. Does anyone see any problems in the digest response or have any other suggestions? Is there a known problem with the iPlanet Directory Server 5.0?
digest-challenge:
realm="BGB2.ndp.provo.novell.com",nonce="Ed8UPLXsWaC6CN",qop="auth",algorithm=md5-sess,charset=utf-8
digest-response:
username="uid=bgbrown,ou=people,dc=siroe,dc=com",realm="BGB2.ndp.provo.novell.com",cnonce="A9IuPJKr30RiwL",nc=00000001,qop=auth,digest-uri="ldap/BGB2.ndp.provo.novell.com",response=97061205298e5ebaf206c8ac3598fdce,charset=utf-8,nonce="Ed8UPLXsWaC6CN"

Found the answer. When the username is an LDAP DN it needs to be proceeded by "dn:".
example: username="dn:uid=bgbrown,ou=people,dc=siroe,dc=com"
The server also accepts a simple uid value.
example: username="bgbrown"

Are there any known issues with a 2003 server authenticating to a 2012 domain controller

I am trying to get off of these 2003 domain controllers. But I still have a couple of 2003 servers that will be decommissioned by early next year. If I change my environment and get rid of the two 2003 dc's, and promote two 2012 dc's. Will I have any issues
with the 2003 servers authenticating? I have a very small maintenance window, and do not have time to test on my own. I was hoping someone else has tried this before, and knows the results.

Hi,
I am not aware of any issues with 2012 as domain controller role. There was an issue with 2012 R2 as domain controller role related to the AES encryption for computer password, but MS issued a hotfix and a rollup (covers many other issues along).
https://support.microsoft.com/kb/910205?wa=wsignin1.0
Once you upgrade your schema to support 2012 domain controllers you can start promoting those and eliminate 2003 ones.
I have been running this in our environment and I see no issues. In fact i am using 2012 R2 DC which were problematic.
Here is another good link to upgrade from 2003 to 2012 or 2012 R2.
http://blogs.msmvps.com/mweber/2012/07/30/upgrading-an-active-directory-domain-from-windows-server-2003-or-windows-server-2003-r2-to-windows-server-2012/
Hope it helps.
Regards,
Calin

Are there any known issues with Silverlight plugin?

Every time I attempt to see a page using
the silverlight plugin, Safari stops responding!
Is it just my configuration, or are there more issues with this plug
in as there were with Windows Media Player?
Regards

OK, as I am on a PPC Mac I have never tried version 2.
As you may recall, Silverlight got its 'breakthrough' when the Chinese authorities decided to broadcast the Olympics using Silverlight. Suddenly everyone needed it!
Now you read press reports of this or that news agency dropping Silverlight, and I don't think I have come across it more than once since the Olympics.
I am beginning not to wonder why!
But this article may be of interest:
http://news.cnet.com/8301-1023_3-10212843-93.html

I am currently running webroot internet security essentials with spy sweeper antispy protection. Are there any known issues with software?

I don't know what else to put. I am just asking a question.

I actually dont have any trouble with the mode switching right now, it works great. That's actually why I'm buying the second X-fi, so I have the ability to switch modes with the different cards. I'm not using the software that came on the CD, but the updated drivers off of the web, and there is a drop down box to change which card you want to set settings for. What issues should I be looking out for?

Are there any known issues with the Sony DCR-SR65?

Has anyone had any experience with this camera? My school is looking to buy one so I can record classes & school events. I am just trying to make sure it is recognised by the computer and that there are no major problems with it.
Also, it seems that it only has USB (no firewire). Does anyone see this as an issue?
Does anyone have a better recommendation for a video camera than the above?
I have a late 2007 iMac with both iMovie 08 and 06.
With thanks
Mike.

I would disagree with Bengt's advice to this extent.
You don't need firewire for the modern high definition cameras that are on the Apple Supported List.
http://support.apple.com/kb/HT1014
Most of these cameras require USB and do not even have firewire.
However, avoid USB-only cameras for standard definition or DV formats (especially if they are not on the supported list.)
Also, just about any miniDV/Firewire camera will work. You don't have to worry whether or not they are on the list.

Are there any known issues with the latest update to iTunes on Windows 7 maxing out the processor and nearly bringing the system to a hault.

Has anyone experienced an issue with the latest update to iTunes (11.2.0.115) for Windows where iTunes pegs out the processor at 97%, 98%, and holds there for maybe 15 minutes before dropping to 50%. During that time, the system is basically useless. You just have to ride it out. I'm running Windows 7 Home Premium.

Hi OnceBeforeIDie,
Welcome to Apple Support Communities!
Take a look at the article below, it has some some tips that will resolve a performance issues like the one you described.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
-Jason

Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

Similar Messages

Maybe you are looking for