Are there any MSI K9A2 Platinum Bios version with better V-core adjust?

Hi everyone
I wonder if anyone knows if there are some bios version to MSI K9A2 Platinum there they have change the V-core settings. I think it´s very big step between the different V-core setting.
In my bios (v.1.3) i have this settings at V-core. Auto=1.32v (AMD 5000+ BE) then 1.36, 1.39, 1.44, 1.49, 1.51. etc.
So, if anyone knows if there are som bios version that have better options to the V-core settings i would be grateful

Quote from: AaronYuri on 05-April-08, 18:33:22
Moved it here, as you don't overvolt a chip to run it at stock.
Okay. I´m sorry if i post it wrong. I have change my profil now

Similar Messages

We feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.pls answer

we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.

I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
Anyway, I ran some commands and here are the results:
megaraid -showstatus
MEGARAID CLI version 1.0.12
No cmd argument
Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
megaraid -showdevices
Physical devices Available = 3
Drive ID Identification Size(MB) Status
0 Hitachi HDS722580VLSA80 78529 Failed
1 Hitachi HDS722580VLSA80 78529 Online
2 Hitachi HDS722580VLSA80 78529 Online
diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *153.3GB disk0
1: Applepartitionmap 31.5KB disk0s1
2: AppleHFSServer HD 153.2GB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *2.6GB disk1
1: Applepartitionmap 31.5KB disk1s1
2: AppleDriveATAPI 4.0KB disk1s2
/dev/disk2
#: type name size identifier
0: untitled *467.0KB disk2
/dev/disk3
#: type name size identifier
0: untitled *95.0KB disk3
/dev/disk4
#: type name size identifier
0: untitled *95.0KB disk4
/dev/disk5
#: type name size identifier
0: untitled *95.0KB disk5
/dev/disk6
#: type name size identifier
0: untitled *219.0KB disk6
megaraid -showconfig
Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
0 5 64 156958 Degraded
megaraid -showapater
FW Version = A130
Bios Version = G117
Product Name = MegaRAID SATA 150-4D
Cache Size = 64MB
diskutil checkRAID
No RAID sets found
Thank you for your help. I really appreciate it and so do the teachers and the students!

Are there any good fax programs that work with Efax besides Efax Messenger

I just signed up for a free months trial of Efax. I downloaded the Efax Messenger program which seems to work well except for the fact that it does not save any fax packages (on my computer) that I send out. This is an important needed feature. If I send out a package of 5 or 6 files to someone I need to be able to look up what I've sent them. The only way I can do this is to put all the files in a folder named for that particular fax, then put that folder in a second folder that is labeled faxes, then fax the files from the folder by Efax. Quite a process. I called Efax and was told that this feature was only available for a Windows Machine (Efax, catch up!)
Are there any other programs that are easy to use and at least as good as the Efax Messenger that have that feature?
We are traveling in a sailboat, don't have a land line. We only have a wifi internet connection when they are available, (internet cafes, etc.) or sometimes at anchor using long range wifi. I don't have the luxury of going online to check faxes all the time, hence the necessity of having them on the computer.
Any help appreciated.
Dan

Just to be clear, though, reducing the resolution of an LCD can have a negative effect on image quality. LCDs have an optimal "native" resolution and setting the resolution below that native level results in a poorer quality image.
Leopard claims "resolution independence" - I have not tried it yet, but if you read the description of this feature, you will note that it applies to the user interface elements. Granted, that's often what you notice the most (i.e. the problem with reducing the resolution below native for an LCD is that the text in Finder, all of the menu bar items, etc., looks "fuzzy"). By appropriately scaling the UI elements, Leopard overcomes the limitation. But the "fuzzyness" will still apply to non-UI things that are displayed - i.e. images. Since based on your posts you will be working with images primarily, high-res vs. standard is still a choice I'd recommend considering carefully, and ideally by trying them both side-by-side.
Ps. Thanks for awarding points!

Are there any voice recorder adapters that work with the ipod touch?

I have an IPod Touch and am starting school in august. Are there any voice recorders that work with the IPod touch? I know there are some that work with the others but any info would help! Thanks

All ipod microphone adapters should work!

Are there any risks to extending my wifi with a retired (1st Gen) Time Capsule?

I just replaced the Time Capsule as the hub of my wifi network. The only problem with the old TC (1st Generation I think) is that it didn't have enough storage, so it could be used again. I can either sell it (not sure if there is a market for it), or I can use it to extend the network. I already have an Airport Express extending the network at one end of my house.
Is there any downside to setting up the old TC to extend the network at the other end of the house?
Does the performance or throughput go down?
Thanks,

Bob,
Thanks for getting back to me. I do appreciate it.
So does this mean that the Airport Express that I use for iTunes, my AppleTV, my wireless HP printer and the Wifi interface to my DirecTV receiver are all causing a degradation in wireless performance? I have noticed some performance issues, where I normally use my MB Pro, but I always thought that was a location problem. We haven't had any problems with the AppleTV, and that's probably where the highest bandwidth requirements are.
I might be able to wire some or all of the devices, but it would be difficult, and it would probably mean buying some sort of Ethernet switch for one location. The AppleTV, Airport Express and DirecTV are all in the same spot. We don't use the printer very often.

My pause forward and backwards button wont work. Are there any handicaps that i can use with the middle button?

My buttons dont work and i wanted to know if there are any substitues that i can use with the home button.

Nope, it either needs to be plugged in or turned on with the power button.
A replacement iPhone 4 is $149, but at least the whole phone is replaced.

HT1933 Following the instructions above, I'm constantly redirected to this help page rather than receiving any drop down list to select what my problem is. Are there any other ways to report issues with purchases?

Following the instructions for reporting an issue with a purchase problem, when selecting "report a probelm", I am not provided with a drop down list, I am redirected to the help page instead.
Is there any other way to report an issue where the app owner has taken the funds twice for the same product at literally the same time?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Are there any DAQmx examples available for use with pci 6229 M series card?

I have been searching around for examples which work with the pci 6229 M series DAQ card. Most examples do not list this card as applicable and the one I have found gives an error. Is there anywhere specifically available, what I am particularly interested in is seeing an analogue channel being triggered by another analogue channel reaching a certain value.
Thanks
Kevin

Hi Kejoglo,
You are right in the fact that the M-Series card is newer than LabVIEW (and therefore the examples that are shipped with it) and therefore the example finder doesn't list the M-Series cards in the list of available hardware.
Basically though, the M-Series cards work with DAQmx and not Traditional DAQ so if you just go into the example finder and search under Hardware Input and Output>>DAQmx and choose an example from that folder to run on your M-Series card. As long as you don't try to do anything outside of the specifications of your card (which I doubt you will do) then you shouldn't have any trouble running any of the DAQmx examples on an M-Series card.
Hope this helps, if you still have problems then please feel free to write back.
Best regards,
Peter H
Applications Engineer
National Instruments UK

Are There Any Other Speakers You Can Use with MacPro Besides 5.1?

I have Logitech Z5500 speakers on my PowerMac G5 and I wanted to get speakers for the MacPro but not the 5.1 speakers because I don't want to crowd it up with 5 more speakers. But it seems like the only speakers that have the optical port are the 5.1 speakers and they don't have 2 optical ports to support both computers.
Do I have any other choices? Any ideas??
MacPro 2.66 ghz, Macbook Pro, Macbook, PowerMac G5 Dual Core Mac OS X (10.4.7)

Glad to have been of service.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Are there any shortcuts to connecting the printer with web services and/or the eprint server?

(HP Officejet Pro 8600 Plus, IE, Windows 7)
As I am unable to execute the instructions given by
by Ryamond 1411, I'm looking for other avenues to connect my printer to web services and/or
the eprint server so I can release 4 emails for printout now stuck in que.

Hello MurrayJ,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Are there any Final Cut Pro 4 conflicts with 10.3 Panther?

I just bought FLIP4MAC software which will allow me to save my Final Cut Pro 4 Quicktime movies as Windows Media Files (I make short comedy films), but neglected to see that it only works with 10.3 Panther. I've been running 10.2.8 for over a year and it doesn't have any conflicts with FCP 4 that I can see. I've purchased the 10.3 installation disks already. Any conflicts I should be aware of before I jump in and install?
Thanks.

AS long as ur not in the middle of a project, I'd go ahead and install.

I have a MSI K9A2 Platinum Motherboard. Bios version 1.8 overclocking

I have a MSI K9A2 Platinum Motherboard. Bios version 1.8
AMD Phenom II X4 940 3.0 GHZ that I have over clocked to (17.5) 3.4Ghz
However anytime I go over that to say multiplyer set to 18 (3.5 ghz) it still runs but crashes when running high end games. I know I have to go in an adjust voltages. However, in the cell menu I can't access the CPU voltage areas I hit enter but nothing happens. It tells me Grey is defualt, White is stable and red is the obvious not recommended setting, but again I can't access it. Is there something I need to disable before I mess with the voltages?
I know that doing any of this could fry the chip I have liquid cooling pretty much this idles at 28 deg Celcuis, that is with it over clocked so I know I have som room and know I should only up the vltage slightly. I just need to know how to do it.
I also wanted to adjust the FSB from the current 200 to 270 which I was told is possible with this board and also that is where it should run stable. Again I just need to know how to access these things in the Bios. If its a bios issue I can update to the next one,1.9, but did not see the need to do so. Anyways any help is greatly appreciated. I am familar with overclocking just not with this motherboard. Any user who uses MSI who could offer assitance would be greatly appreciated. Thanks.
Windows 7 64bit Proffesional.
AMD Phenom II X4 940 3.0Ghz (OC to 3.4)
Liquid cooling
MSI K9A2 Platinum Bios release 1.8
6 GB of DDR2 (800) Memory
2GB Radeon 4870 X2 FO
Power supply= 850 watts

Use the keyboard number pad + or - keys.

Are there any issues regarding running Labview on Windows Vista

I am a cognitive psychology graduate student, and I am considering switching to LabView to display stimuli and gather RT data. I have previously used E-Prime for this task, but E-Prime doesn't seem to run well with Windows Vista. Are there any known issues regarding running LabView with Windows Vista?
Thanks
Chris

I've had no problems on Vista*. Only issue I've had was concerning how Vista uses fonts, but if you start on Vista and don't switch between XP and Vista, etc., then you'll be OK.
*no problems with LabVIEW's compatibility with Vista. Now, Vista in general, that's another story and not for this thread/forum.
Richard

Kingmax Hardcore DDR500 with MSI MS K8N Neo Platinum (Bios Version 1.40)

I am interested in Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM. Currently, I’m using MSI MS K8N Neo Platinum (Bios Version 1.40) with AMD 64bit 2800+ & MSI MS 8907 FX5200-TD128 AGP Card.
Please advice whether the Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM compatible with my systems.

The "safe mode" that the BIOS message refers to is not related to Windows' Safe Mode. The BIOS safe mode lets you un-do any overclocking or memory settings that might make your computer so unstable that you can't even get into the BIOS settings to change them. In that case, you hold insert while powering on to reset the BIOS to default safe values.
As for your problem getting into Windows' Safe Mode. If you upgraded from another motherboard that uses a different chipset, or if you somehow got the wrong chipset drivers installed, then the old AGP GART or chipset drivers will cause the system to halt/reboot very early in the Windows boot process even in safe mode. I've run into this problem before and its tricky. Best thing to do is switch back to the old motherboard, then go into safe mode and remove all chipset-related drivers, and then switch back to the new motherboard. If you can't do that, try running system repair from the windows setup CD. And failing that, you'd probably have to fully re-install the OS.

Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

I'm going to assume the consolidating files does not work due to hard drive space limitations.
Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility? That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
Also, using the Apple article on moving the library, take a slight twist on what it says. Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

Are there any MSI K9A2 Platinum Bios version with better V-core adjust?

Similar Messages

Maybe you are looking for