Are there any problems using a back cover.

I want to protect the back of my iPad from scratches. Are there any problems using a skin or cover on the back?

Is it ok to cover the back of iPad 2? Won't it affect the cooling system? Coz I don't see any ventilation point and it may be the back metal plate itself which brings out the heat. I purchased a "Targus" back cover from apple store and it fits perfectly and beautifully also very comfortable to handle but I removed it thinking that it might harm., also Apple hasn't introduced any sort of back cover either, only the smart cover for the screen they have, may be coz the back is designed to be open to the air.

Similar Messages

Are there any problems using an ipad imported to the UK from korea?

Are there any problems buying an Ipad in South Korea to use in the UK?

Me too - its a possible gift and (like most things) iPhones are cheaper in the states than in Canada.
I'm assuiming these phones are universal. But i'd rather know before buying.
Thanks

Are there any problems using the Ipad while is is plugged into the wall and charging?

Are there any contraindications using the Ipad while it is plugged into the wall and charging???

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
 Cheers, Tom

Are there any problems using transitions with a layered menu

I am creating a DVD using layered Photoshop files for the menus. I know there are many issues when doing this.
I have 2 questions.
Will creating a 3 state button (normal, rollover, select) cause more problems than a 2 state button?
Can I use the menu trasitions with a layered Photoshop menu?
Thanks

I don't know of many "issues". In fact i think using photoshop files is a standard practice.
The only issue i can see from having a 3 state button is using an overlay in the normal state might create some distortion in your button, but other than that there can be some great advantages to using all three states like an overlay mask.
Yes you can use the transitions. One of the best ways to find out is to give it a try.

Are there any problems using the Thunderbolt to Firewire 800 adapter?

I found the only way to migrate my old mac to my new i
mac was to use a firewire 800 to thunderbolt adapter, or ethernet. Am I correct?

Welcome to the Apple Support Communities
You can also migrate wirelessly > http://support.apple.com/kb/HT4889
However, I recommend you to use FireWire to migrate from your old Mac because it will be much faster than Wi-Fi or Ethernet, so if your old Mac has got a FireWire port, buy the Thunderbolt to FireWire adapter for your Late 2012 iMac and migrate from your old computer

Are there any problems with Snow Leopard Server (Xserve) and PPC Clients

Hi,
are there any problems identified yet with Snow Leopard Server, installed on a Xserve and PPC Clients running Mac OS X Tiger and Leopard?
Currently I have a Xserve Intel running Leopard Server and about 12 Mac Minis PPC running Mac OS X Tiger and Mac OS X Leopard. The Xserve serves services like DNS, OpenDirectory, Software Update Server, NetBoot, etc. All users have Home Directories stored on the Xserve.
Now I want to install Snow Leoaprd Server on the Xserve, but I wonder if there are any problems using the PPC Clients? I have read something like this on a german website.
Thanks!

We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
Thanks
Paul

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
tag. This not only gives points to the posters, but points anyone
searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...

Are there any problems running oracle database express 10g and iis together

Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
Does oracle database express cause any conflicts with iis (because of used ports etc)
Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

I would not expect a problem under normal circumstances.
Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

HT4623 Should I update my iphone4 to iOS 7?Are there any problems in this?

Should I update my iphone4 to iOS 7?Are there any problems in this.

I read the same thing about iOS 3, 4, 5, 6. You come to a forum that provides support, you are going to read problems. I did not have any, but I didn't come here to report that. Just like asking if everyone you see in an emergency room is sick.

Are there any problems with a "required Extended Protection" / "Always On" / "Livelink Server" combination?

Hello,
we have a Livelink Server database running with two replicas on two nodes as Always On Group, both instances running extended protection in "allowed" mode.
Our company security policy demands setting the extended protection to "required".
Are there any known problems with a "required Extended Protection" / "Always On" / "Livelink Server" combination?
Environment:
OS: Windows Server 2008 R2 Enterprise X64 SP1
DB: SQL Server 2012 (11.0.5556.0)
Thx & BR
Achim

Hi Achim,
According to my knowledge, there are no known problems with a "required Extended Protection" / "Always On" / "Livelink Server" combination.
Extended Protection helps to prevent an authentication relay attack by using service binding and channel binding. We need to note that when Extended Protection is set to
Required, only connections from protected applications on protected operating systems are accepted. This setting is the most secure but connections from operating systems or applications that do not support Extended Protection will not be able
to connect to SQL Server. For more details, please review the following article.
Connect to the Database Engine Using Extended Protection
https://msdn.microsoft.com/en-us/library/ff487261(v=sql.110).aspx
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Are there any problems with un-compressing a drive?

Bottman wrote:
The only issue that I can think of is if the compressed files are then larger than the available space on the drive.
If you're worried about this, you could uncompress a block of files at a time.
The drive is currently 67% free. I don't know what the compression ratio is but it probably wouldn't cause an issue with drive space.

I have a very important 2TB logical disk (NTFS, Basic, not the system disk) attached to a Server 2008 R2 virtual machine. Write performance has been very slow with large files and I realized that "Compress this drive to save disk space" is checked for the whole drive. Are there any issues with disabling this feature? It's easy enough to enable but I don't know what happens when I disable it.
This topic first appeared in the Spiceworks Community

Are there any problems with Lion and Adobe CS5 ?

I am wanting to upgrade to Lion but don't want to have the hassle of trying to fix any problems as I have heard some people had problems with earlier versions of Adobe Creative Suit and Lion and having recently moved I have no clue where my CS5 keys are so before doing so I want to know there will be no errors.
Peoples experiences would be appreciated and many thanks.

I have upgraded two Mac mini's which both have the Adobe Creative Suit Cs5 Acrobat, Illustrator, InDesign and Photoshop. I have had no issues regrding the upgrade, they just work.
However I do have two user interface issues. InDesign the keyboard page up, page down keys no longer work as expected, they simply jump to the next screen, the workaround is to use a trackpad for the left hand and use two finger scrolling.
The other is the arrow buttons in the vertical scroll bar no longer exist, so again the trackpad comes in for scrolling.
This applies for almost all software and the finder.

Is there any problems using LabView 5.1.1 on Win2K?

I am currently upgrading the company's system from Win NT 4.0 to Win2K and I am wondering if there is any problems in upgrading LabView to Windows 2000?

No infact i'm running LV5.1.1 and LabVIEW 6.0.2 on the Win2k system.
A Rafiq
National Instruments
http://www.ni.com/support

I can't download any of the updates i have, also i can't download any new app , are there any problems with the app store ?

Does any one has the same problem ? I can't download or update any app using app store from the mobile

I am not able to download any app in the App Store. The download circle starts to spin and stops again after a few seconds.

Are ther any Problems with HTML in iOS 6?

We are having a problem with animated HTML-Objects in Adobe DPS. It's seems to be related with the iOS 6 update. We have two iPads, one with the updated software (iOS 6) and the other without it (iOS 5). Both of these have been updated with the new Adobe Content Viewer. The one with the old iOS works perfectly (HTML, Edge Animation, Videos) but the other with the most-up-to-date software does not. The HTML doesn't play and some times plays it once. We even tried by adding it to the HTMLResource folder to be trigger by a button to open a new window by itself, but no joy. Again we don’t have any of these problems on the iPad without the current software update. They all work perfectly

All the HTML content on my iOS 6 devices renders fine.
What does a web page from a non-Adobe DPS site look like?
From your description, it's a problem with the Adobe software.
Contact them.

Are there any problems using a back cover.

Similar Messages

Maybe you are looking for