Are there any problems using the Ipad while is is plugged into the wall and charging?

Are there any contraindications using the Ipad while it is plugged into the wall and charging???

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
 Cheers, Tom

Similar Messages

Are there any problems using an ipad imported to the UK from korea?

Are there any problems buying an Ipad in South Korea to use in the UK?

Me too - its a possible gift and (like most things) iPhones are cheaper in the states than in Canada.
I'm assuiming these phones are universal. But i'd rather know before buying.
Thanks

Are there any problems using the Thunderbolt to Firewire 800 adapter?

I found the only way to migrate my old mac to my new i
mac was to use a firewire 800 to thunderbolt adapter, or ethernet. Am I correct?

Welcome to the Apple Support Communities
You can also migrate wirelessly > http://support.apple.com/kb/HT4889
However, I recommend you to use FireWire to migrate from your old Mac because it will be much faster than Wi-Fi or Ethernet, so if your old Mac has got a FireWire port, buy the Thunderbolt to FireWire adapter for your Late 2012 iMac and migrate from your old computer

Are there any problems using a back cover.

I want to protect the back of my iPad from scratches. Are there any problems using a skin or cover on the back?

Is it ok to cover the back of iPad 2? Won't it affect the cooling system? Coz I don't see any ventilation point and it may be the back metal plate itself which brings out the heat. I purchased a "Targus" back cover from apple store and it fits perfectly and beautifully also very comfortable to handle but I removed it thinking that it might harm., also Apple hasn't introduced any sort of back cover either, only the smart cover for the screen they have, may be coz the back is designed to be open to the air.

Are there any problems using transitions with a layered menu

I am creating a DVD using layered Photoshop files for the menus. I know there are many issues when doing this.
I have 2 questions.
Will creating a 3 state button (normal, rollover, select) cause more problems than a 2 state button?
Can I use the menu trasitions with a layered Photoshop menu?
Thanks

I don't know of many "issues". In fact i think using photoshop files is a standard practice.
The only issue i can see from having a 3 state button is using an overlay in the normal state might create some distortion in your button, but other than that there can be some great advantages to using all three states like an overlay mask.
Yes you can use the transitions. One of the best ways to find out is to give it a try.

I can't download any of the updates i have, also i can't download any new app , are there any problems with the app store ?

Does any one has the same problem ? I can't download or update any app using app store from the mobile

I am not able to download any app in the App Store. The download circle starts to spin and stops again after a few seconds.

Are there any problems with Snow Leopard Server (Xserve) and PPC Clients

Hi,
are there any problems identified yet with Snow Leopard Server, installed on a Xserve and PPC Clients running Mac OS X Tiger and Leopard?
Currently I have a Xserve Intel running Leopard Server and about 12 Mac Minis PPC running Mac OS X Tiger and Mac OS X Leopard. The Xserve serves services like DNS, OpenDirectory, Software Update Server, NetBoot, etc. All users have Home Directories stored on the Xserve.
Now I want to install Snow Leoaprd Server on the Xserve, but I wonder if there are any problems using the PPC Clients? I have read something like this on a german website.
Thanks!

We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

Are there any settings in the options (or anywhere else) that I can use to set up an auto confirm and resend without having to manually click the 'resend' butto

There is a certain website I use that I refresh frequently. Every time I do I get a pop up message labeled ‘Confirm’ with a question mark in it that says;
“To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier."
It only seems to be a problem with this one particular site. Are there any settings in the options (or anywhere else) that I can use to set up an auto confirm and resend without having to manually click the ‘resend’ button in the pop up window?

Hi cor-el, Thanks for responding;
I am accustomed to seeing this type of pop up on occasion and understand why they are necessary to prevent duplicating orders, payments, etc. I am not using a back button, I wanted to use an auto-refresh app to search for reservation openings on a certain web site and can not because this pop up requires me to manually push a button every time the page refreshes. I am resending the same information every time (a date range) via the POST form, so, was hoping there was a way to either disable, override, or set up and auto response so I can use the auto-refresh app. Your description of how to avoid the pop up didn't entirely make sense to me, but If I have to do a bunch of manual steps in between each refresh attempt it doesn't matter because I'm no better off.

Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the

Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the sleep mode ? How do I check this out ?

You can set times for your computer to turn on or wake from sleep in the Energy Saver system preference pane using the Schedule... button.

Hi since sunday,my imessages are not working..i cannot even send normal sms to iphone users..is there any problems in the software ? pls advice

Hi since sunday,my imessages are not working..i cannot even send normal sms to iphone users..is there any problems in the software ? pls advice

Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
Thanks
Paul

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
tag. This not only gives points to the posters, but points anyone
searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...

Are there any problems running oracle database express 10g and iis together

Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
Does oracle database express cause any conflicts with iis (because of used ports etc)
Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

I would not expect a problem under normal circumstances.
Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

JPA and CAF BO - are there any editors of the JPA data (like CAF)?

Hello!
As you know SAP invented some layer above JPA and called it CAF. There is a very convenient way to edit data in CAF.
But now I have to create a complex database scheme, also with CAF doesn't allow us to work with objects. So we can't use someObject.getChildren().
So my question is are there any editors of the JPA data (like it is done in CAF)?

Hi Kirill,
at the beginning of our project at the end of 2009, we did a deep analysis of CAF since our architect vehemently suggested to use this framework.
First about the history and purpose of CAF: Initially, CAF was never meant to be a layer above CAF since CAF was invented in the time before EJB 3.0 and JPA standard where writing persistence with EJB 2.x CMP forced the developer to write pages of boiler plate code. This background was approved by SAP.
With upcoming of JPA, CAF ist mostly useless (except for very simply structured data) and prevents you from writing good software.
It is easy just to write @Entity, @Id and @OneToMany (for complex database schemes) and CAF forces you to use an ugly, imperformant database scheme (e.g. CAF uses mapping tables even for 1:n relationships, a clear antipattern!)
The CRUD-services generated with CAF are a pain, too. Usage of pessimistic locking is not up to date for web applications.
With your complex database schemes, you exceed the limit of CAF.
(We decided not to use CAF and did never regret this.)
Concerning your question: There is an "JPA Details" view in NWDS that might help you. It needs JPA Persistence facet on your project to work. Developed by SAP. For JPA beginners, it is a good cheat sheet for JPA annotations and their attributes.
You do not need more since a JPA POJO is easy to code.
Regards,
Rolf

HT4623 Should I update my iphone4 to iOS 7?Are there any problems in this?

Should I update my iphone4 to iOS 7?Are there any problems in this.

I read the same thing about iOS 3, 4, 5, 6. You come to a forum that provides support, you are going to read problems. I did not have any, but I didn't come here to report that. Just like asking if everyone you see in an emergency room is sick.

Are there any problems using the Ipad while is is plugged into the wall and charging?

Similar Messages

Maybe you are looking for