Are there any reference manager systems that allow inserting citations into pages other than endnote?
Are there any reference manager systems that allow inserting citations into pages other than endnote?
Only Endnote is integrated with Pages. How other reference manager systems work, i do not know but that are not integrated with Pages.
Similar Messages
-
Question:
I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. PhuongHi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
Are there any digital/video frames that will play .mov files?
are there any digital/video frames that will play .mov files?
Hi
Not understanding Your Question - I can only guess
.mov - are no specific Video Format (Codec) it is a container (read folder) and can hold Codecs many program can use and NOT.
QuickTime Player use to open many of them - try this and if it opens then Open Inspector [ cmd + I ] and read
• Video Format (Codec): nnnnnnnnnn
• Frame Rate: yyyyyyy
What does they say
When QT-Players don't open - I use VLC-Player (Google it and download for free). It use to take most of the Codecs.
Yours - May be far out in the Blue - Bengt W -
Are there any free TV channels that can be received on the Apple TV?
Are there any free TV channels that can be received on the Apple TV?
No, it's not a TV tuner. It's primarily marketed as a rental vehicle for iTunes store movies/purchases and for playback of compatible (see specs) media from iTunes.
Some subscription streams are available eg Netflix, MLB as well as youTube and some limited internet content (no browser).
Check the Apple tech pages. -
Are there any tools or apps that would allow the use of iMessage from a desktop
Hello,
I am curious to see if there are currently any apps for programs that would allow me to use iMessage from my desktop pc at this time.
Malcom ChakerySo if I had a mac laptop I could imessage from it?
-
Are there any good fax programs that work with Efax besides Efax Messenger
I just signed up for a free months trial of Efax. I downloaded the Efax Messenger program which seems to work well except for the fact that it does not save any fax packages (on my computer) that I send out. This is an important needed feature. If I send out a package of 5 or 6 files to someone I need to be able to look up what I've sent them. The only way I can do this is to put all the files in a folder named for that particular fax, then put that folder in a second folder that is labeled faxes, then fax the files from the folder by Efax. Quite a process. I called Efax and was told that this feature was only available for a Windows Machine (Efax, catch up!)
Are there any other programs that are easy to use and at least as good as the Efax Messenger that have that feature?
We are traveling in a sailboat, don't have a land line. We only have a wifi internet connection when they are available, (internet cafes, etc.) or sometimes at anchor using long range wifi. I don't have the luxury of going online to check faxes all the time, hence the necessity of having them on the computer.
Any help appreciated.
DanJust to be clear, though, reducing the resolution of an LCD can have a negative effect on image quality. LCDs have an optimal "native" resolution and setting the resolution below that native level results in a poorer quality image.
Leopard claims "resolution independence" - I have not tried it yet, but if you read the description of this feature, you will note that it applies to the user interface elements. Granted, that's often what you notice the most (i.e. the problem with reducing the resolution below native for an LCD is that the text in Finder, all of the menu bar items, etc., looks "fuzzy"). By appropriately scaling the UI elements, Leopard overcomes the limitation. But the "fuzzyness" will still apply to non-UI things that are displayed - i.e. images. Since based on your posts you will be working with images primarily, high-res vs. standard is still a choice I'd recommend considering carefully, and ideally by trying them both side-by-side.
Ps. Thanks for awarding points! -
Are there any voice recorder adapters that work with the ipod touch?
I have an IPod Touch and am starting school in august. Are there any voice recorders that work with the IPod touch? I know there are some that work with the others but any info would help! Thanks
All ipod microphone adapters should work!
-
Are there any free plugin's that I need to download? (was Lightroom 4.4)
Good afternoon.
Question------yesterday I received a e-mail telling me LR 4.4 was now available to download, which I did. Are there any free plug*in's that I need to download?
KennyO.K. Sorry about that. Please help me out. I am very new to LR, and I am having a difficult time learning it. I am 74 years old and have Dementia, so please excuse my ignorance. What should I be putting at the top?
Kenny -
Are there any known conflicts when Norton Antivirus is loaded into mavericks?
Are there any known conflicts when Norton Antivirus is loaded onto a MacBook Pro running mavericks?
If you installed it, uninstall it.
One or more of the following support documents may be applicable:
Uninstall Norton Internet Security for Mac
Removing Symantec programs for Macintosh by using the RemoveSymantecMacFiles removal utility
RemoveSymantecMacFiles -
Are there any apple experts online that can help me with my problem?
My problem is outlined here.
http://discussions.apple.com/message.jspa?messageID=4109139#4109139
I have spent months messing around on this site and other forums trying to get a response but there isn't much of a solution out there. Is there a way to e-mail someone at apple who can give me answers?
Thanks.Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Is there any version of Indesign that allows to open multiple instance at the same time
I am using Indesign CS3 to generate the bulk reports automatically(programmatically) using Adobe indesign library . One of the key limitation to this tool is it allows to open only one instance at a time unlike word where multiple instances can be opened at the same time. Is there any adobe indesign too version desktop/server which allows to open multiple instances at the same time. Any help on is appreciated. Thanks.
@PeterG
You said "You might want to examine the End User Licensing Agreement (EULA) for any prohibition against using these two instances at the same time with the same license; the license does permit two installs for the same user that are not used simultaneously." I thought that meant you had read the EULA. It's pretty unambiguous on that point.
For everyone's edification about multiple installations and server use with a standard license here's the relevant text:
2. Software License.
If you obtained the Software and any required serial number(s) from Adobe or one of its authorized
licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive
license to install and use the Software in a manner consistent with its design and Documentation and as
further set forth below. See Section 16 for specific provisions related to the use of certain products and
components, for example font software, Acrobat, After Effects, Adobe Presenter, Contribute, Adobe
Device Central, Flash Player, Flash Builder, and Adobe Runtimes.
2.1 Limited Use. The Software, or portions of the Software, may allow installation and use without a serial
number. If so, you may install but not use such non-serialized Software on any number of Computers as
part of an organizational deployment plan. Further, you may install and use such non-serialized Software
on any number of Computers for demonstration, evaluation and training purposes only and only if any
Output Files or other materials produced through such use are used only for internal, non-commercial and
non-production purposes. You may not use such non-serialized Software after any applicable time-out
period has ended, unless you input a valid serial number under Section 2.2. ACCESS TO AND USE OF
ANY OUTPUT FILES CREATED WITH SUCH NON-SERIALIZED SOFTWARE IS ENTIRELY AT
YOUR OWN RISK.
2.2 General Use. You may install and use one copy of the Software only on the Permitted Number of your
compatible Computers into which you enter a valid serial number.
2.3 Distribution from Server. You may copy an image of the Software onto Computer file server(s) within
your Internal Network for the purpose of downloading and installing the Software onto Computers within
the same Internal Network for use as permitted by Section 2.1 and 2.2.
2.4 Server Use. You may install the Software on Computer file server(s) within your Internal Network only
for use of the Software initiated by an individual from a Computer within the same Internal Network only
as permitted by Section 2.2. The total number of users (not the concurrent number of users) able to use the
Software on such Computer file server(s) may not exceed the Permitted Number.
By way of example, the foregoing does not permit you to install or access (either directly or through
commands, data or instructions) the Software: (a) from or to a Computer not part of your Internal Network,
(b) for enabling Web hosted workgroups or services available to the public, (c) by any individual or entity
to use, download, copy or otherwise benefit from the functionality of the Software unless licensed to do so
by Adobe, (d) as a component of a system, workflow or service accessible by more than the Permitted
Number of users, or (e) for operations not initiated by an individual user (e.g., automated server
processing).
2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
install a second copy of the Software for his or her exclusive use on either a portable Computer or a
Computer located at his or her home, provided that the Software on the portable or home Computer is not
used at the same time as the Software on the primary Computer.
2.6 Restrictions on Secondary Use by Volume Licensees. If the Software was obtained under an Adobe
volume license program (currently known as Adobe Open Options) by any licensee other than an
educational volume licensee, the second copy of the Software made under Section 2.5 must be used solely
for the benefit and business of that volume licensee. For more information about secondary use by volume
licensees, please visit our Web Site at http://www.adobe.com/go/open_options.
There is also language stating that if you have a dual boot or other system capable of running more than one OS you will need a separate license for each platform if you want to run the software on more than one. -
Is there any Enterprise Manager Utility that can help update the Hostname
I have installed An Oracle Database 12c and further planning to install Enterprise Manager 12c CC on top of this,
Since occassionally my system IP changes due to dhcp configuration, hence i prefer using hostnames instead of IP address and further update hosts.properties file iwthin C:\Windows\System32\drivers\etc\
further in case if i have to change the hostname of my machine, is there any utility that will help to update the hostname across properties files of all the Enterprise Manager components ?
Also when installing 12c EMCC, i understand there is a pre-requisite to deconfig dbcontrol.
In my case when i run from on Oracle 12c Database home, - emca -deconfig dbcontrol db -repos drop,
I get unkown command error.
C:\app\Oracle\product\12.1.0\dbhome_1\BIN>emca -deconfig dbcontrol db -repos drop
'emca' is not recognized as an internal or external command,
operable program or batch file.
C:\app\Oracle\product\12.1.0\dbhome_1\BIN>
kindly guide from where do i run the deconfig command or whether is it really required or notHi,
Just an update further.
The 12 EMCC installation of all components completed except for Agent Configuration Assistant.
View Log of Agent Configuration Assistant :
~~~~
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = E:\EnterpriseMgr\agent\core\12.1.0.3.0\oui\jlib\srvm.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\jlib\agentConfig.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\jlib\emConfigInstall.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\sysman\jlib\emagentSDK.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\modules\oracle.http_client_11.1.1.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\sysman\jlib\log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=E:\EnterpriseMgr\agent\core\12.1.0.3.0
2.AGENT_PORT=
3.ORACLE_HOSTNAME=NTEJANI-VBOX1.in.oracle.com
4.b_doDiscovery=true
5.AGENT_BASE_DIR=E:\EnterpriseMgr\agent
6.AGENT_INSTANCE_HOME=null
7.s_hostname=NTEJANI-VBOX1.in.oracle.com
8.OMS_HOST=NTEJANI-VBOX1.in.oracle.com
9.b_startAgent=true
10.b_secureAgent=true
11.b_chainedInstall=true
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4899
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : NTEJANI-VBOX1/127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:Trying for host : NTEJANI-VBOX1/10.180.63.214 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent: The agent port is 3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=E:\EnterpriseMgr\agent\agent_inst
2. agentBaseDir=E:\EnterpriseMgr\agent
3. oraHome=E:\EnterpriseMgr\agent\core\12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:E:\EnterpriseMgr\agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for E:\EnterpriseMgr\agent\core\12.1.0.3.0 and hosts=NTEJANI-VBOX1.in.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with E:\EnterpriseMgr\agent\agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into E:\EnterpriseMgr\agent\core\12.1.0.3.0\install\oragchomelist
INFO: oracle.sysman.top.agent:E:\EnterpriseMgr\agent\core\12.1.0.3.0:E:\EnterpriseMgr\agent\agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: cmd /c set NEED_EXIT_CODE=1&&E:\EnterpriseMgr\agent\core\12.1.0.3.0\bin\emctl.bat deploy agent -L -o NTEJANI-VBOX1.in.oracle.com:4899 -N E:\EnterpriseMgr\agent\agent_inst NTEJANI-VBOX1.in.oracle.com:3872 NTEJANI-VBOX1.in.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: E:\EnterpriseMgr\agent\core\12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : E:\EnterpriseMgr\agent\agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from E:\EnterpriseMgr\agent\agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'Asia/Calcutta' is installed in E:\EnterpriseMgr\agent\agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: cmd /c set NEED_EXIT_CODE=1&&E:\EnterpriseMgr\agent\core\12.1.0.3.0\bin\emctl.bat deploy agent -L -o NTEJANI-VBOX1.in.oracle.com:4899 -N E:\EnterpriseMgr\agent\agent_inst NTEJANI-VBOX1.in.oracle.com:3872 NTEJANI-VBOX1.in.oracle.com completed with status=0
INFO: oracle.sysman.top.agent:Exit value -1
INFO: oracle.sysman.top.agent:AgentUpgradeMain CreateService FAILED: The specified service already exists.
INFO: oracle.sysman.top.agent:Failed in creating service Oracleagent12c1Agent
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
~~~
I tried Starting the agent and it started successfully. But pingOMS failed and also in agent status,, it shows OMS unreachable
below is the commands i executed
~~~~
E:\EnterpriseMgr\agent\agent_inst\bin>emctl start agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
The Oracleagent12c1Agent service is starting..................
The Oracleagent12c1Agent service was started successfully.
E:\EnterpriseMgr\agent\agent_inst\bin>emctl pingOMS
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
EMD pingOMS error: An internal error has occurred at the agent: "unable to send response". Check the agent's error logs for details.
E:\EnterpriseMgr\agent\agent_inst\bin>emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.3.0
OMS Version : (unknown)
Protocol Version : 12.1.0.1.0
Agent Home : E:/EnterpriseMgr/agent/agent_inst
Agent Binaries : E:\EnterpriseMgr\agent\core\12.1.0.3.0
Agent Process ID : 3884
Parent Process ID : 6060
Agent URL : http://NTEJANI-VBOX1.in.oracle.com:3872/emd/main/
Repository URL : https://NTEJANI-VBOX1.in.oracle.com:4899/empbs/upload/
Started at : 2013-09-06 11:23:37
Started by user : NTEJANI-VBOX1$
Last Reload : (none)
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 82.39%
Collection Status : Collections enabled
Heartbeat Status : OMS is unreachable
Last attempted heartbeat to OMS : 2013-09-06 11:25:36
Last successful heartbeat to OMS : (none)
Next scheduled heartbeat to OMS : 2013-09-06 11:26:06
Agent is Running and Ready
E:\EnterpriseMgr\agent\agent_inst\bin>
~~~
Kindly guide.
Regards,
Nayan -
Is there any Content Management System better then Drupal?
Hi everybody,
I am in search of content management system for my new project it is for the collaboration of high school teacher. I want to provide following feature in it:
*Blog
*Lesson Plan
*Chat
*Email
*Virtual Class Room features
*Personal Resource
*Resource sharing
*discussion forums
*and more ... according to further requirement.
Please suggest me any better solution with Java technologies.Well, the basic unit of information in RH is the topic. There
are features to modify a topic and to exclude it from the final
output. But you can't re-use part of a topic in another topic.
In a real CMS, you are writing building blocks from which the
output is generated. Talking about online help, you can have one
building block appear in a multitude of different topics. If you
change one block, the changes propagate through all topics using
this building block.
And don't get me startet abour robustness, reliability and
the ability to handle large projects...
RH has several features which emulate a CMS, but the basic
concept is completely different.
---Dirk Bock -
Are there ANY memos/notes apps that will sync with Mac, NOT "cloud"?
In desperation I got BlueMarbleSOftware.com's "Memos" app to move memos from my now defunct Palm to my iPhone. I then discover that "Memos" can't create a new category on the iPhone. Grr. It also uses a Google Files account to move them. I keep sensitive information in my memos and I'm NOT going to put that out in the "Cloud". So, this isn't working out well.
My question:
Is there ANY iPhone/OS X application pair out there that will allow me to sync my notes/memos to my Mac and not to the Cloud? iTunes is a pretty poor sync mechanism since it can only allow me access to iTunes type stuff. iCal, while not very good, at least syncs with the calendar on the iPhone and contacts also sync with OSX. However, nothing that I can find will sync notes with the Mac directly. Has anyone out there found something that will? I'm happy to pay for it if it DOESN'T go through the "Cloud".
I love my iPhone's capabilities, but Apple's restrictions on its use are dimming my enthusiasm a bit about the iPhone being a killer "do everything" box.
Thanks,
DLCYou wrote:
Here ya go:
http://www.markspace.com/
MacBook Pro
This sounds ideal - My read of it wasn't perfectly clear - Does it sync through the USB cable that the Apple sync uses or though a wireless connection? How good is the Mark/Space notes app? Apple's notes doesn't allow grouping by category, everything goes into one place, is the M/S notes app better than that?
Thanks! This is looking perfect!
DLC
Maybe you are looking for
-
oracle form 6.0, how to do 3D chart, calender,mouser over changing....in we form, like microsoft style. Or it's better use 9i or 10g jdeveloper? or other tchnology?
-
Fetching a image in the adobe form from sap server/appliaction layer
hi all, i want to fetch a logo/image from the application layer/ sap server, so that everyone can use it in adobe form. i have already upload the image using SE78. I try to add the image into library, it works. But the problem is that, only from my l
-
How to force all pdf's to open with Acrobat
Hi, hope this isnt too silly a question, but how do I make acrobat the default for opening all pdf's as opposed to preview, thanks in advance
-
Copy all ABAP program to another server.
Hi all, I have 2 servers (example: server 1 is DEV1, server2 is DEV2). I developed all ABAP report,form and Ztable on DEV1. Now, I want copy all ABAP report, form and Ztable from DEV1 to DEV2. How to do it? Please help me I need it. Thank you
-
Tried to download Songbird, messed up iTunes bad (Error 13005)
So I wanted to see what songbird was like, so I downloaded it, didn't like it. Tried to go back to iTunes and it keeps giving me: Unknown Error (13005) A google search told me to delete my genius tab, it just kept getting recreated every time that I