Are there any SB cards that still use MME / WDM drivers?

That's what I need to know;
the company I contract for is replacing the audio recording PC and will need a sound card that's MME / WDM compliant?
I have a recording PC in my home studio and it has an ASIO card (E-MU 0404 PCI)
and I have to do retakes due to major drop outs about 20% - 25% of the time
even after setting it up for recording and changing the process priority of the card drivers & services
but the old P4 that the company has is using an SB-Li've and I've never seen it drop out once in the last 5 years of recording.
I've been given the task of researching the components needed to build the PC from the ground up.
?any helpful info would be appreciated.

Hi Plowboy and welcome to the BlackBerry Support Community Forums!
Unfortunately RIM does not have any drivers supported by Windows 98.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
    Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
    Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
    1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
    No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
    2) Are there any changes I can make to get this working again?
    If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
    Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

  • Is there a way to download movies onto the iPad?  If so, are there any particular sites that I should use?

    Is there a way to download movies onto the iPad?  If so, are there any particular sites that I should use?

    You can only download content from the apple itunes and app stores.

  • My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
    In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
    Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

  • Are there any mp3 players that CANT record and runs by replacable batteri

    hello,
    like the topics says, are there any mp3 players that DOES NOT have the recording function and runs by replacable alkaline batteries?
    i really need one as i am working in a place that requires stay in and i cant charge players, what makes it worst is that there are like top secret information there and they forbits any recording devices, which most mp3 players have XD
    Some help please? thanks! =D

    You can check out the MuVo Sport C00 and MuVo Mix player. They are both operating using AAA battery and without voice recorder.
    Jason

  • Running Snow Leopard and having issues syncing.  Are there any donwload/upgrades that can help?

    ...besides Lion, which I am unable to download because it is telling me I don't have enough memory on my Mac.  I am looking for a way toset up iCloud on my desktop. I still get the mobileme logo oin my system preferences???

    Running Snow Leopard and having issues syncing.  Are there any donwload/upgrades that can help?
    Yes. iCoud requires Lion v10.7.2
    Read here >  Apple - iCloud - Learn how to set up iCloud on all your devices.
    am looking for a way toset up iCloud on my desktop
    It can't be done with Snow Leopard.  

  • HT5622 Are there any parental controls that can be placed on an apple ID that a parent would obtain for a child?

    Are there any parental controls that can be placed on an apple ID that a parent would obtain for a child?

    Not on the ID as such, but you can certainly use parental controls (Sustem Preferences) and/or create a limited access user account  (in Users & Groups). You would have to delete any applications or folders s/he is not allowed to have access to.

  • Are there any screen protectors that are made of 0.40 tempered glass but also has privacy glass so others cant look at your screen from the side?

    Are there any screen protectors that are made of 0.40 tempered glass but also has privacy glass so others cant look at your screen from the side? I have found only one that says this and that is Amzer® Kristal™ Privacy Tempered Glass HD Screen Protector for iPhone 6. they are not a very well known brand and I am scared to buy this because there is not much information on it tat I could find. please help.

    Are there any screen protectors that are made of 0.40 tempered glass but also has privacy glass so others cant look at your screen from the side? I have found only one that says this and that is Amzer® Kristal™ Privacy Tempered Glass HD Screen Protector for iPhone 6. they are not a very well known brand and I am scared to buy this because there is not much information on it tat I could find. please help.

  • Are there any interesting tricks that the iphone 5 can do?

    Are there any interesting tricks that the iphone 5 can do? Are there any secrets?

    How about these:
    Apple - iPhone 5 - Learn some helpful iPhone tips and tricks.
    50 iPhone 5 tips and tricks - Opinion - Trusted Reviews

  • Are there any standar iview that works with transaction Ad-hoc Query?

    Are there any standar iview that works with transaction Ad-hoc Query?
    So, I want the same iview for the various querys.
    Are there any iview how this?

    I am working with Portal and HR.
    Now, we are looking for to make a query, get the generated code, and insert it in a rfc. So, i could make a java web dynpro and call the rfc. But this is not the best solution.
    My question is about are there any standard iview for this scenario.
    Do you know?

  • Are there any PC cards which have sample and hold capability

    Are there any PC A/D cards which have sample and hold capabilities up to a 10 Khz sampling rate which we are interested in for modal testing of engine structures. Also if this type of card is available what would be the maximum input channel count of this card. We would be interested in the highest count available up to 64 channels.
    A second question: We currently have a 64 channel PCI 6071 capable of 1.25 MS/s throughput. If we are using all 64 channels what would be the interchannel delay between the first and last recorded channel and at what frequency would we have to be sampling to even be able to see the affect of the interchannel delay of this specific card.
    This issue has been debated wi
    th in our group and your insight would be appreciated as you are the experts in this field.

    Dear Sir,
    Thank you for using NI Developer Zone.
    National Instruments has a product line designed specifically for acquisition of dynamic signals, it is called DSA - Dynamic Signal Analyzers. In according to the description of your application the card that best fits your needs is the NI-4472 that is available in PCI and PXI format. This card is able to acquire 8 channels simultaneously, as opposed to the regular DAQ cards that have a single A/D converter and a multiplexer. The NI-4472 has 8 Delta-Sigma A/D converters one per channel, what results in a better performance than having a single A/D converter in combination with a sample and hold and a multiplexer. To Acquire 64 channels you would have to have 8 boards and synchronize all 64 channels. The Synchronization process is very simple and with a couple of software calls we can synchronize as many as 112 channels for simultaneous acquisition at 102.4K samples per second per channel.
    Regarding your second question, the PCI-6071 will sample between channels in a single scan at the maximum sample rate of the board (1.25 MS/s) but the
    scan rate, i.e. the rate in which the same channel is sampled is defined by the user. Being that said, we can conclude that the interchannel delay will be the inverse of the 1.25 MS/s clock, or 0.8 micro seconds.
    For a 1 KHz sine waveform, this represent a phase delay of 0.288 degrees between consecutive channels. For a channel list of 64 channels each one having the same 1 kHz sine waveform, the phase delay between the first and the last waveform will be 18.432 degrees.
    I really recommend the NI-4472 as a very good solution for your application, besides that the combination of the NI-4472 with LabVIEW and the sound and vibration toolset will give you a tremendous tool to solve not only your immediate need but also provide you a system that will be easily modified and adapted for future needs.
    If you need more info, feel free to contact me and I can give you more details about this product.
    Call 1 800 IEEE488 and ask to speak with the Computer Based Instruments (CBI) support team.
    Best Regards.
    Omar De Andrade
    Applications Engineer - Computer Based Instruments
    http://www.ni.com/support/

  • Are there any iPhone headsets that allow volume control?

    The new Apple In-Ear headphones are shipping at last, and I am considering buying some. I am currently looking to upgrade to some high-quality headphones from my standard iPhone buds, but I would like to have a working microphone and remote like those Apple buds have for my convenience. Are there any such headsets with working volume controls as well? Does the iPhone's audio jack lack a connector for this additional piece of equipment, as some folks are suggesting? A lot of people have been saying that the remote and microphone portion of the new In-Ear headset will work with the iPhone, but the volume buttons do not. I've seen mixed reports, so I'd like to hear some more opinions on this matter.
    If volume control is not possible, I will still look into upgrading. So far, I'm considering the In-Ear phones, the V-MODA Vibe Duo headset. Any other thoughts or recommendations are appreciated.
    Thanks in advance.
    -MacUser

    I bought a set of the Vmoda Vibe with the microphone. They sound great !! the silicone seals are just your average seals. After a couple of months the seals would sometimes stay in my ear when I pulled the earpiece out. A couple of months ago i bought some foam seals that work absolutely great. They are available on the Vmoda website. Kinda pricey..$14 ish for three pair. they only come in gray and accumulate dirt faster than the silicone seals but, they stay in your ear. Last week, as i wrapped the cord, i noticed it was broken at the pin plug site where it's curved (bends). This ***** as now when talking on the phone with the earbuds everything echos. My audio and the other persons audio also. Of course Apple won't exchange them since I purchased them more than two weeks ago. (A year hasn't expired yet) I'm going to send them to Vmoda and see what happens. I purchased the new Itouch earbuds. they are Apple white. I wished they came in black but, they are AWESOME !! The sound is incredible. The silicone seals work great so far. They look to be shaped differently so now they stay in your ear..so far...I purchased them for my iphone. The microphone/hold button work fine with no echo on either side. They have a volume level control but it does not work on the iphone. Bummer...This feature would have made them the ultimate Iphone earbuds. The volume does work on my ipod. Go figure. Overall, the new Apple In-ear headsets are great, They must have a tweeter and woofer in there cuz the sound is fantastic and the silicone seals actually stay in place.

  • Are there any sound cards with best driver support for Arch?

    I was wondering if there are any sound cards that have the best driver support for ArchLinux? I currently own a Creative Labs X-FI Platinum Edition. The main reason I like the Platinum is that has an interface you can plug MIDI and Audio ports into. It seems to me, however, that Creative is the worst company to support Linux drivers. If anyone has any opinions, please feel free to comment. According to all my research, ALSA sound drivers are the most supportive for sound. Am I also correct in this assumption?

    yeah, creative sucks. go with m-audio. they support linux unlike creative.

  • Are there any updates so i can use my HP Photosmart C4780 All in One Printer wirelessly?

    just wondering..are there any updates for the iMac with OS X (10.8.2) so I can use my HP Photosmart C4780 All in One (Print,Scan,Copy)?

    Hi,
    An HP Full Feature Software is not available for Mountain Lion, therefore the Wireless configuration is tricky and cannot be done through the software.
    To connect the printer to your wireless network you will need to create a temporary wireless ad hoc connection, then the wireless connection to your router can be configured via the EWS page:
    Step one: Restore the printer's network default settings
    Touch the ATM button ( ) next to Wireless / Scan .
    Touch the ATM button ( ) next to Wireless Menu .
    Touch the ATM button ( ) next to Wireless Settings .
    Use the up and down ATM buttons ( ) to select Restore Network Defaults , and then press OK .
    Touch the ATM button ( ) next to  Yes to confirm your selection.
    Step two: Networkly connect the Mac to the printer by creating a temporary ad-hoc connection
    From the Mac, click the Wi-Fi icon.
    Click Join other network.
    Click Show Networks.
    Select the printer's SSID, it should be listed as HPSETUP or should contain HP or C4700 within its name.
    Click Connect
    Allow two-three minutes to fully establish the network connection.
    Step three: Connect the printer to your router via the EWS page
    Open Safari.
    Click the Bookmarks icon ()
    Click Bonjour.
    Double click the printer name, the EWS page appears.
    Open the Networking tab.
    From the left pane select Wireless.
    Click the Start Wizard button and follow the steps to connect the printer to your router.
    Step four: Reconnect the Mac to your router
    From the Mac, click the Wi-Fi icon.
    Click Join other network.
    Click Show Networks.
    Select your router SSID.
    Click Connect
    Allow two-three minutes to fully establish the network connection.
    Now the printer should be connected to your network.
    Open Print & Scan, click the Plus sign and add the printer listed as Bonjour.
    btw John Galt - I this it should be spelled as OS X, please correct me if i'm wrong.. ;-)
    Hope that helps,
    Shlomi

  • Is Quark V8.5.1 compatible with OS Lion? Are there any other issues that anyone knows about?

    I have a Mac running 10.6.8 and would like to upgrade to Mac OS Lion 10.7.2. Are there any compatibility issues with Quark 8.5.1, Adobe CS5 etc.?

    Quark XPress (version 8.5.1)
    ISSUE: tools in the tools panel are invisible
    current operating system: 10.7.3
    It is growing progressively hard to continue to use Quark XPress
    I am finding that they are having a very difficult time keeping up with
    updates and price points with Adobe and Apple.
    I had to purchase this software called Markzware so that I could convert the Quark file to InDesign.
    It was not cheap but it was no where near the cost to update Quark to version 9
    I like Quark and have to use it for some clients, but the issues are starting to catch up with me now.
    If anyone knows how to fix this issue... I WOULD LOVE TO FIND OUT!!!

Maybe you are looking for