Are there any tutorials on how to create a folio to an interactive pdf?

Is this feature possible at the moment? If yes, would appreciate exact how-to steps. Thanks in advance. 

The interactivity in a folio and that of an interactive PDF only overlap
in very small areas. There is no way to convert a folio to PDF.

Similar Messages

  • Are there any guidelines on how to customize R/3 reports into BW

    Hi Everyone,
    I have quite a number of R/3 reports that is required to be converted into a BW report but I do not know what I am supposed to do.
    Are there any guidelines on how to determine if a R/3 report should be created in BW? If it should be done in BW, how do I consider if it should be reported of a cube or an ODS?
    I have been doing development for ard 3years and this is the first time I have to analyze and come up with a functional/design specs. Need help.
    If there is any documents on the guidelines, please send it to [email protected]
    Thanks.
    Regards,
    Shunhui.

    Hi Shunhui
    TABS -> here Venkat was refering to SAP education courses on BW on extraction,reporting etc.
    I am not aware if there are any guidelines given by SAP.
    I will try to help you build the approrach for this:-
    1. You should collect functional specification of R/3 report. This will include the functionality of that report, logic & calculations involved, usage of report output by end users etc.
    2. Collect technical specification- In this you create excel sheet with all fields in R/3 report with relevant details such as formulas used, calculations involved etc.
    3.Map these technical specs with BW business content. Try to see if you can get Business content datasource which will be a fit for majority of your R/3 report fields.
    4.Carry out gap analysis and end of this excerise determine how you are going to fill this gap - whether buy using Zinfoobject,routines,datasource enhancements etc.
    5.Classify the reports as Aggregate or transactional level. If it is transactional level then you need to make use of ODS.This will determine your data model in BW.
    6.Based on 5 steps mentioned above,create a design document with dataflow & data model details.
    7. Get a Sign off on functional,technical specs & design document with proposed dataflow from users and implement it.
    For templates of functional & technical specs , you can refer to blueprint section of Accelerated SAP.
    Hope this helps
    Regards
    Pradip

  • Are there any tutorials for calling the Apple StoreKit API with a DPS app?

    Are there any tutorials or resources for learning how to sell a 'non-consumable' in a DPS app running on iOS.
    Mark 

    You have two options:
    One get the OE creation script from some other Oracle install and install them on the XE database.
    More info on where to get it is here:
    http://www.oracle.com/technology/obe/obe_as_1012/j2ee/common/obeconnection.htm
    Or just use HR tables instead - most of the tutorials simply use a master details relationship - so in OE it is usually the customer who has order - and you can adopt it to the HR schema using the departments that has employees.
    Don't know about the XE license, you might want to ask this on the XE forum.
    Shay

  • Are there any Tutorials on wireless apple television

    ARE THERE ANY TUTORIALS  ON APPLE TV         

    what do you mean if you mean how you set it up then I'm sure youtube would have a ton
    how to setup apple tv

  • I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

  • I have Photoshop CC and I'd like to make an event flyer.  Are there any tutorials, templates, help???

    I have Photoshop CC and I'd like to make an event flyer.  Are there any tutorials, templates, help???

    Since your question is about Photoshop, I've moved it to the Photoshop General forum.

  • Are there any standard BAPIs to change/create/delete quote data on CRM side

    Hello Friends
    I am getting prepared for the XI integration of the data (quotes related) from our application to CRM. Are there any specific BAPIs that you guys are using to create, modify, delete a quote in CRM.
    Any feedback or advice will be highly appreciated.
    Tks
    Ram

    Hi Ram,
    Check these BAPIs:
    BAPI_QUOTATION_CREATEFROMDATA2
    BAPI_CONTRACT_CREATEFROMDATA
    Hope this helps you.
    Regards,
    Chandra Sekhar

  • Is there any tutorials on how to make a form in Adobe Acrobat?

    http://www.bgsu.edu/downloads/hr/file26711.pdf
    I need help! I need to make a form just like the one in the link above. Is there any step by step directions on how to do this?
    Thanks!
    Salome Roe

    That's a pretty basic form built using an older version of Acrobat (not sure what you are using. This is the Reader forum by the way).
    You can start with this tutorial: http://tv.adobe.com/watch/learn-acrobat-x/getting-started-creating-simple-forms/

  • What are the possible causes of following errors in MAX? Are there any references on how to use MAX?

    Hi, it's me again.
    I've checked the encoder response in MAX (-ve ccw, +ve cw) and it seems fine. But when the motor moves MAX will generate a following error message. Is my encoder causing the problem or have I made a mistake in the settings? I've checked the connections to the encoder and they are all correctly wired.Could there be other causes of following errors?
    The motor does stop earlier when I reduced the following error value, so I'm assuming that the motor stops only when it has reached the set number of following errors and NOT because the motor has reached the target position. Any help is greatly appreciated.
    Thank you.

    It may be that the 7344 is missing encoder values, or that the motor isn't tuned correctly. The first thing I'd like for you to check is that the Encoder Counts per Revolution input to the Axis Settings menu in MAX is set correctly (I believe it defaults to 2000 counts). To check this, you can rotate the motor by hand one revolution to see how many counts have accumulated. Most encoders are either 2000 counts per rev or 4000 counts per rev.
    Once you have that confirmed, autotune the motors and make sure the values for Kp, Kd, and Ki are resonable. (Kd is often around 10x Kp) Once these are set, start your motors moving slowly and observe the following error. This can be seen under the Advanced tab of the 1D Interactive menu. If it is slowly incrementing, t
    hen your're missing counts. If it is negative, then the encoder phases may be backward. If there is no following error, or the count stays constant, then try increasing the speed. It could just be that your encoder sends pulses too fast for the 7344 to read.
    Let me know how it goes.
    Kyle V

  • Are there any WLST 11g Scripts to create an OSB domain?

    All the ones I can find (forums, blogs, etc.) are for 10g. Things have changed since then, it seems. For example, most scripts contain something like:
    addTemplate(workshop_home + '/common/templates/applications/workshop_wl.jar')
    addTemplate(wl_home + '/common/templates/applications/wls_webservice.jar')
    addTemplate(osb_home + '/common/templates/applications/wlsb.jar')
    Since Workshop no longer exists, this fails.
    11g doco is sadly lacking...
    Thanks for any help.
    Alph

    I've also been attempting to create and configure an OSB 11gR1 domain using WLST and am also hitting some issues when adding the extention templates.
    I think I've identified the required templates as the following:-
    ${middleware.home}/oracle_common/common/templates/applications/jrf_template_11.1.1.jar
    ${osb.home}/common/templates/applications/oracle.soa.common.adapters_template_11.1.1.jar
    ${wls.home}/common/templates/applications/wls_webservice.jar
    ${osb.home}/common/templates/applications/wlsb_base.jar
    ${osb.home}/common/templates/applications/wlsb.jar
    The correct resources appear to be added but many of the deployments are wrongly targetted when using an admin + cluster topology.
    I've found that the templates contain dependency references in the template-info.xml and dependencies are implicitly included when you use WLST addTemplate(). The wlsb.jar template is dependent on the other 4 templates so you can just add wlsb.jar and the others get pulled in for you or explicitly add them all (starting with the children otherwise you will see a template already added error).
    I’ve tried various combinations of the 5 templates and essentially what I see is that the same apps and resources are always included but with seemingly random (and wrong!) targeting.
    One thing I have noticed is that the domain template framework seems to have been changed between 10gR3 and 11g. The most relevant difference (for this issue) appears to be addition of “config groups” configuration files. I can’t find any docs on these but they appear to group applications, libraries and other resources according usage and/or deployment requirements e.g. OSB-ADMIN-APPS, OSB-ADMIN-AND-CLUSTER-APPS, WLS-WEBSERVICE-MAIN-APPS etc and I imagine that they are used during domain configuration to target apps at the correct servers and clusters. Perhaps some additional WLST function calls are required to ensure these are applied correctly?
    If I use the domain configuration wizard then I can successfully create the domain so this is an option, but we'd rather have a fully scripted and repeatable domain creation process if possible. I expect that the config wizard must be using the same templates so there must be a way to script this?
    Thanks in advance

  • Are there any tutorials on making animated gifs in flash, from a video?

    I have an avi video file that i'd like to make into an animated gif in flash. How do I go about doing this? I know there is an option in photoshop where you can import the video frames onto layers. Is there something similar in flash?

    [http://wetpixel.com/forums/lofiversion/index.php/t16884.html]
    This might provide a bit of insight.

  • Are there any tutorials out yet?

    The window looks simple enough, in that I am familiar with iMovie 11, but no doubt will need a tutorial or ten. Has anyone offered any video tutorials, like Lynda.com or???
    Hugh

    I bought the Ripple training and am watching it now, piece by piece. It is very helpful, and I am really impressed by the delivery to iTunes. That allowed me to make a data dvd of the quicktime movie files, as well as make a playlist and watch in iTunes.
    The (relatively) low cost was also a nice touch.
    I get the problems the pros have, but as a home consumer, I am blown away by FCPX.
    It is obviously something that is, under the hood, just really complicated and demands that one both spend a lot of time playing around getting experience, and getting some sort of tutorial.
    The tutorials go a little fast for me, so I am keeping a piece of paper next to the mouse and am copying down info as needed, but am sure it will come together by Apple's first update.
    Hugh

  • Are there any tutorials for JDeveloper with Oracle XE?

    I have downloaded a tutorial for JDeveloper over Oracle.
    In this it uses a connection to the OE (Oracles order entry database?), however it does not contain this database in the XE version.
    There is however a HR (Human resources) database which I made some connection to, but this mean you cannot realy follow the whole tutorial, which is the point of a tutorial.
    Also I read that the License to XE expires the end of next Jan, so that dosent give me much time to check it out.
    thanks.

    You have two options:
    One get the OE creation script from some other Oracle install and install them on the XE database.
    More info on where to get it is here:
    http://www.oracle.com/technology/obe/obe_as_1012/j2ee/common/obeconnection.htm
    Or just use HR tables instead - most of the tutorials simply use a master details relationship - so in OE it is usually the customer who has order - and you can adopt it to the HR schema using the departments that has employees.
    Don't know about the XE license, you might want to ask this on the XE forum.
    Shay

  • Are there any tutorials on the basics of using iBook Author?

    I am an established author and want to use iBook Author to make some of my op material (where I have secured all rights)to be made available again.  I have to adapt the iBook Author templates to accomodate the pages.  I need help learning how to do this.

    Regarding templates this thread may be useful.  One user is working on a handbook.
    https://discussions.apple.com/thread/3677610?tstart=30
    The basic info produced so far by Apple (aside from the in-app Help) is at
    http://www.apple.com/support/ibooksauthor/

  • Are there any tutorials or books for an acoustic project ?

    I've been through the Martin Sitter book and so much of it is for "Loopers" .
    I was just at the macProVideo site http://www.macprovideo.com/tutorial/logicEnvironment and these also seem interesting but I really need just the audio info .
    I would love to find a book or tutorial that takes you through an acoustic project with no midi (maybe an acoustic guitar and voice) from start to finished mix .
    Does anybody know of anything like this
    iMac 2.33 GHz- Powerbook - eMac   Mac OS X (10.4.8)  

    Hey Bob,
    what you probably need is some information
    on how to Mic a guitar or recording vocals mix it,
    and recording environment (meaning your fisical space).
    Instead of buying a lot of books and DVD's on the subject,
    a good solution's probably a sound on sound esub (after
    subscribe you have acess to the past articles (on a search
    data base) and the mag online for a year.
    It's a wonderfull way to learn too.
    http://www.soundonsound.com/
    Cheers,
    Jorge

Maybe you are looking for

  • What size external hard drive do i need to backup my macbook pro?

    I know I need to backup my computer, especially since I have been experiencing some problems with it and will need to take it into a store to get looked at, but I do not know what size external hard drive I need to back my computer on.

  • Forwarding Webmail to Mac Mail client

    My university runs on a mail server called Webmail. I have the mail forwarding from webmail to my g-mail account on the generic Mac Mail client. I like this so I can get all my mail from school sent to my iPhone. However, my issue is that I would lik

  • Can't open file. wants me to upgrade.. but mac says its up to date !

    i'm trying to open a document modified a few months ago. i have pages 09 version 4.3. its says i must have a later version to open the file, but when i go into my mac's app store, its says no updates are available for my app. although there is some m

  • Preferred style of event handling?

    Having developed several java applications I found that my preferred method of event handling in java is to have one component (often named EventHandler) which implements ActionListener's, MouseListener's, ListSelectionListeners, etc. I like this app

  • What is the POINT of the Creative Cloud App?

    This is a bug report and a rant: Every time the CC app updates, one or more of my Installed Apps disappear from it. With the last update, all but two disappeared. The apps themselves (Dreamweaver, Photoshop, Illustrator, Muse, etc.)are all still ther