Are there apps available for this ipod

iPod Nano 5th generation - seeking sleep meditation apps - can apps be used on this model???

Unfortunatly, you can not get apps on iPod nanos.
I have a nano too and i was disapointed when i learned that you can not get apps on the nano.
Hope i helped!

Similar Messages

  • I wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do?plz suggest

    i  wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do? plz suggest

    The iPod touch has a very rudimentary camera.  It has only a 0.6 MP resolution, no optical zoom, no flash, etc.   There is no app that can improve this as it is limited by the hardware. So it is not a replacement for a digital camera (nor even for an iPhone whose camera has a 5.0 MP resolution.

  • My iPod touch is a model MB528LL running version 4.2.1.  I would like to download the At Bat 12 App (the $14.99 version) so I can listen to professional baseball games this year.  Will there be an app. available for my iPod?

    My iPod touch is a model MB528LL and runs version 4.2.1.  I would like to download the At Bat 12 app. (the $14.99 version) so I can listen to professional baseball games this year.  Will there be an app. available for my iPod this year?

    I went to the link you posted and followed all the steps.  I was thrilled to see that it worked!  I don't recall whether my PC still recognized my iPod Touch as a camera or not, but DEVICES did show up in iTunes and it recognized the name of my iPod Touch.
    Now, though, everything is back the way it was.  The PC tells me I have a camera connected via USB and iTunes doesn't even have DEVICES listed in the left-hand column.
    I'm wondering if this is the problem:  I had the iPod on until the battery was so "low" that it stopped.  I didn't press and hold the button on top.  In fact, until I read the article you linked to, I didn't even know you could turn the iPod on and off that way.  I would only press it once until the screen turned blank and simply pressed the Home buttom to turn it back on.  Until I read that article, I thought the Home button was the On button.
    So now my question is this:  Should I ALWAYS turn the iPod off by pressing and holding the button on top until I see the red slider on the screen?
    Thanks!

  • Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.

    Hi,
    I am using EWS Java APIs and passing OAuth tokens to fetch data from office 365 mailboxes.
    Because I am developing Web APIs I preferred using "Application Permissions" defined in Azure active directory application for Office 365, and used "client credential flow" OAuth flow to fetch OAuth token specific to application which will
    allow "Have full access via EWS to all mailboxes in the organisation".
    After fetching token with the procedure specified in the document "http://blogs.msdn.com/b/exchangedev/archive/2015/01/21/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx"
    I passed this token to EWS Java APIs,
    it gave me error saying:
    microsoft.exchange.webservices.data.ServiceResponseException: Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.
    I tried similar thing with EWS managed APIs for .net. Got similar error.
    Can anyone provide some help and direction to resolve this error.
    Thanks & Best Regards,
    Pranjal

    I see you found an answer with the X-AnchorMailbox header on StackOverflow:
    http://stackoverflow.com/questions/29554724/exchange-web-services-are-not-currently-available-for-this-request-because-none

  • Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

    Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

    Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
    (108187)

  • Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

  • Are there specific earbuds for an ipod touch?

    Are there specific earbuds for an ipod touch? I have replace the ipod twice now and each time, my earbuds to not work. The music is very faint, can barely hear...

    No. The iPods all use earphones with the standard 3.5 mm stereo plug.

  • My iPhone 4 with cash card is slowly emptying the balance of the card. Only Wi-Fi is normally ON, most other things OFF. Are the Apps responsible for this, or is something wrong with the phone itself? How can I stop the "thief"?

    My iPhone 4 with cash card is slowly emptying the balance of the card. Only Wi-Fi is normally ON, most other things OFF. Are the Apps responsible for this, or is something wrong with the phone itself?  How can I stop the "thief"?

    I have this exact same problem. One solution is having your friends change their fake aliases on Facebook to their real bloody names, but I realise this is no easy fix.

  • Are there templates available for scheduling in Numbers?

    Are there templates available for project management in Numbers (similar to Microsoft Project)?

    Valarie,
    Microsoft Project is much more than a template, and won't be replaced by a template in Excel or Numbers, but if all you want from it is a GANTT Chart, you can do a pretty good job of that. Some while ago I created a Numbers GANTT template and Yvan placed it in his public folder.
    To take a look at it, go to Yvan's idisk :
    <http://public.me.com/koenigyvan>
    and download :
    For_iWork:iWork '09:forNumbers09:JerroldGreenGanttChart.zip
    Let me know if you have questions.
    Jerry

  • Oracle EBSuite 12i - Are the apps available for Windows 64 bit machine?

    Hello,
    Can anyone help please? I am looking for Oracle EBSuite V 12i on eDelivery site. But the only Apps available for download is for Windows 32bit systems. Does anyone know if it is available for 64bit systems, given that most systems one buys now are 64bit machines? Based on the answer, i will either have to buy a new 32bit machine (if it is available) or get the downloads for 64bit systems. Please kindly let me know.
    Many thanks, Deepak

    1) Does one need to be a technical guru to install Oracle EBS R 12i on Windows?No.
    2) Do you have any documentation which takes this step by step for the non technical person?Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
    Oracle E-Business Suite R12 Installation Steps on Windows XP
    Oracle E-Business Suite R12 Installation on Windows 2003
    3) I downloaded EBS zipped folders (approximately 30 to 40) from the eDelivery site. I will obviously have to unzip them and then run the exe files. My purpose in having R12i is purely for learning purposes, using the Visions database. Will I need to purchase any license for this, or after isntallation, I can start using the visions database?You can use it for the first 30 days for evaluation as mentioned in the e-Delivery website -- https://edelivery.oracle.com/
    However, nothing would stop you from using the application after then -- The license is something ethical.
    Thanks,
    Hussein

  • Are there templates available for Numbers 08?

    I'm trying to create a sales account profile in Numbers. Is there a template available for this?

    d,
    Just be careful when you browse for Numbers Templates that you're getting an 08 version. The newer ones are likely to be for 09. You can use the trial version of 09 to open, browse and Save As 08 if you wish. There will likely be some fix-up to do in that case, but it would be better than nothing. It's amazing how the Numbers Templates on the sharing sites have improved in the past several months, and of course the best will be done is Numbers09.
    Jerry

  • RV110W - trying to set up 2 VLANS - are there docs / help for this?

    I am trying to set up an RV110W router with 2 VLANs - 1 for guests to the office to just have internet access via wireless and another for employees to be able to access the LAN and internet wirelessly. I have not done anything with VLANs before, so please bear with me.
    I thought this would be simple, but banging my head against the wall with all the terms in the docs:
    http://www.cisco.com/en/US/docs/routers/csbr/rv110w/administration/guide/rv110w_admin.pdf
    port 1 is connected to a wired LAN / unmanaged switch with office PCs. So these machines / nothing on this subnet tag the packets before they get to the router.  This subnet is using 10.10.1.0/24
    Port 2 is connected to an Engenius EAP 300, a wireless access point that can broadcast SSIDs and tie each SSID to a different VLAN.
    SSID1 is called Private and is set to be VLAN 1. There's encryption on this SSID - only office staff would be able to log on.
    SSID2 is called public and is set to be VLAN 10.  There's no encryption on this SSID.
    I know - the router also does this, but where the router is vs. where the wireless is needed, we need to have the Engenius at that remote location.
    I have the RV110W set to give out 10.10.1.0/24 IPs when you connect to the SSID1 / VLAN1
    And it gives out 10.10.10.0/24 IPs when you connect to the public SSID / VLAN10.
    Both get on the internet fine.  The only issue is how to set the VLAN membership for each port / and any other settings so that the wireless devices on VLAN 1 can get to the LAN devices on Port 1.  (and the public / vlan 10 devices on the wireless network to NOT get to the devices on port 1, but i think that's working.
    I played with tagged / untagged / excluded, for the port membership, but either the wireless VLAN 1 devices get blocked from even the web (when port 2 is set to untagged, since they ARE tagged VLAN1) or they can't get to port 1 when set to tagged, since the port 1 devices are all untagged and the reply packets get blocked?
    the doc for this unit talks about inter-vlan routing but doesn't explain what that is.  THe wireless isolation should be turned on for vlan 10, right? We don't want guests to be able to access other guest's machines?
    I saw on page 71 on how to set up the guest network, but that's using the wireless built into the box, not a wireless access point.
    Overall, what I want is:
    VLAN 1: port 2 (with tagged VLAN1 packets) and port 1 (with untagged packets) can pass data between each other and access the internet
    VLAN10: port 2 with tagged VLAN10 packets can only get to the internet.
    Is that doable?
    How?

    thanks.  Still not working
    For the vlan membership page
    when set like this:
               port1         port 2
    vlan1     untagged    untagged
    vlan10  excluded     tagged
    connecting to the vlan1 wireless SSID on port 2, I can't even get an IP address from the router (the dhcp request can't even come through port 2 because it's saying vlan1 packets have to be untagged?
    connecting to the vlan 10 wireless SSID on port 2 gets a DHCP address and can only get to the web, so that's good.
    If I change the membership to:
                      port1 port 2
    vlan1 untagged  tagged
    vlan10 excluded tagged
    connecting to both SSIDs on port 2 will get you a dhcp address, and vlan1 devices can get into port 1, but trying to admin the wireless access device on port 2 or even pinging it, now fails -  'cause the router gatekeeper says if you want to come through port 2, your packets have to be tagged? and the packets from port 1 to port 2 are untagged?
    If I change the membership to:
                port1 port 2
    vlan1   tagged tagged
    vlan10 excluded tagged
    connecting to both SSIDs on port 2 will get you a dhcp address, but replies from the wired PC on port 1 / vlan1  vlan1 can't get back out of port 1 'cause the router gatekeeper says if you want to leave  through port 1, your packets have to be tagged? and the ping reply is coming form a device with untagged packets?  although the devices on vlan1 / port 1 CAN get on the web with their untagged packets.
    the wireless device says it supports 802.1q
    http://www.engeniustech.com/resources/EAP300_DataSheet_v2.1.pdf
    when they say port 2 / vlan 1 tagged, is it saying packets coming in FROM devices on that port have to be tagged? Or packets going TO devices on that port have to be tagged?  or both directions?
    Any advice?

  • HT4199 The screen is freezing when i am mirroring a video from my mac to LCD TV via Apple TV? Are there any solutions for this problem?

    Anybody can help?

    One area to troubleshoot is to check the amount of bandwidth that you have available for mirroring. Starting with your Apple TV; which generation is it? What is the make and model of your wireless router? Is the Apple TV in the same room as the router, different room, or different floor? How about your MacBook Air when you are attempting to mirror to the Apple TV?

  • Three days ago I updated my iphone 4s to IOS 7. Many of my apps disappeared and many of them will not even open. Are there any fixes for this nightmare? Can you revert back to the previous IOS 6

    IOS 7 has been a nighmare. I have lost apps and the ones that are still there clearly will not open. Can you revert back to the previous version IOS 6.

    I would sync with the computer
    and make sure that settings->itunes & app stores-> appleId was set correctly
    no ios device ever supported downgrading ios version

  • I want to upload an App for Knoxville TVA Employees Credit Union to my Mac I can not fine one in I stores.  Is an App available for this?

    Is there an app for the Knoxville TVA Employees Credit Union in the App Store?

    Apps for credit unions and banks are almost always for phones and tablets, not laptop/desktop computers.
    To get into your credit union account on a laptop or desktop computer, you use a normal web browser (Safari, Firefox, Chrome...) to sign into the credit union web site using your online account username and password.

Maybe you are looking for

  • Progess bar is not showing until the task is completed

    Hi, when some button press, in button action i am using "progessBar.setVisible(true)" as fist statement then i am processing some XML files. according to above scenario the progress Bar need to visible first then processing XML files later but after

  • SSRS 2012 excel export is still coming out as an xls not xlsx

    Hello, All I am pretty new to SSRS 2012 and trying to migrate existing SSRS 2005 reports to SSRS 2012 to resolve the limited record export function with classic excel format. The server is using .Net Framework 2 application pool as below and it's not

  • Parameter mapping warnings

    I am using sp12, and am wondering if something has changed with parameter mapping, because I am using the same method I used when I was on sp9, but am now getting compilation warnings about my parameter mapping. I have an action with a string paramet

  • Session member variable usage

    I want to keep client-specific information for each incoming connection, but i heard it cannot be done with session variable. i read in a book that session variables in a servlet (or scriptlet section of a jsp page) are shared among all incoming thre

  • Trying to install adobe photopshop elements 13, installation keeps freezing.  I have windows 8.1

    I have tried on three occasions to load the disc.  It has frozen on 2% and 8% and I had to restart.   It has currently been frozen on 17% for over an hour.   The disc drive is silent and nothing seems to move or respond.