Are there compatability issues using Photoshop Elements 7.0 on a 64bit operating system?

I have a 64 operating system on my laptop and cannot get my photoshop elements 7.0 to work on it at all! I have a photography assignment to hand in next week and have no photoshop program to complete it on! Anyone help?

You should check the Microsoft Compatibility Centre for software that will run in a 64 bit operating system.
http://www.microsoft.com/windows/compatibility/en-us/default.aspx

Similar Messages

I want to upgrade to Mavericks 10.9.3. Are there compatibility issues with Adobe CS6 ? Thanks

want to upgrade to Mavericks 10.9.3. Are there compatibility issues with Adobe CS6 ? Thanks

Go to roaringapps.com/apps?index=a and look that specific product up.
(108251)

Can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this tim

can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.

How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Are there any issues with changing IP address of an ACS v5.3 system after initial setup?

I am migrating from ACS v4.2.1 to v5.3. I want the final v5.3 system to assume the IP address of the original 4.2 machine so I don't have to change any configs on the network devices.
Are there any issues with changing the v5.3 system IP address AFTER the initial setup?

I tried it without a problem. I changed the ip address of the WLC many times.
You have to make sure though that:
1-) You change the switchport accordingly to the appropriate vlan if the new ip belongs to a subnet of a different vlan.
2-) Make sure that all AAA clients configured to use the new IP address of the ACS servers.
Here is the procedure how to change the ip of the interface (as per cisco doc):
http://goo.gl/0BYqVT
I changed also by normal ip address command and it works. but of course the server must be standalone before doing that step (i.e. no secondary ACSs registered to it and it is not registered to other ACSs in a distributoin).
HTH
Amjad

Are there compatibility issues with OSX Mavericks?

I am currently running OSX Lion on my iMac and using Photoshop CC. If I upgrade to OSX Mavericks (OSX 9) are there any compatibility issues?

MacOS 10.9 has a lot of bugs, but the biggest ones seem to have been fixed by 10.9.4.
The problems we see remaining mostly center around drivers, especially Epson printer drivers.

Are there compatibility issues with 1st gen I pad and new wireless printers?

Need to replace HP printer being used with 1st Gen I Pad. Are there any compatibility issues with new wireless printers?

Hello jxroads,
Welcome to the Apple Support Communities!
I understand that you are going to replace your printer and would like more information on what printers are supported for AirPrint. The attached article has a list of AirPrint printers currently supported for iOS devices.
About AirPrint - Apple Support
Cheers,
Joe

Are there compatibility issues between Unity Connection 8.5.1 and IE 11

Just recently installed IE 11 and now when I log in to Unity and try to use one of the drop downs, like "edit" to edit a greeting or password or whatever it doesn't drop anything down. Can't get to any of the "edit" menu items. Do I have to drop back if I want to continue using internet explorer?

Hi Scott,
I didn't see any specific bugs related to IE11 but it is not
on the supported browser list for CUC 8.x so you may be out of luck;
Software Requirements—Administrator Workstations
Revised June 19, 2013
•To access web applications on the Cisco Unity Connection server, the operating system and web browser must be compatible with the version of Unity Connection that you are installing. Table 1 lists supported operating-system and browser combinations.
Table 1     Supported Operating Systems and Browsers on Administrator Workstations for Cisco Unity Connection 8.x
Operating System
on Administrator Workstation Browser on Administrator Workstation
Microsoft Windows Vista
•Microsoft Internet Explorer 8.0 and 7.0
•Mozilla Firefox 3.0 and 2.0
•Microsoft Windows Server 2003
•Microsoft Windows XP
•Microsoft Internet Explorer 8.0
•Microsoft Internet Explorer 7.0 and 6.0 (plus SP1)
•Mozilla Firefox 3.0 and 2.0
Mac OS X 10.4 and later
Mozilla Firefox 3.0 and 2.0
Red Hat Enterprise Linux
Mozilla Firefox 3.0 and 2.0
Microsoft Windows 7
(32 and 64 bit)
•Microsoft Internet Explorer 8.0, 9.0(1) and 10.0
•Mozilla Firefox 3.6, 10
Microsoft Windows 81
(32-bit and 64-bit)
•Standard
•Professional
•Enterprise
•Microsoft Internet Explorer 10.0
•Mozilla Firefox 17
1 Windows 8 in the Desktop Mode.
Note Cisco Unity Connection Web Interface drop down menus: Cisco Unity Connection Administration(CUCA) and Cisco Personal Communications Assistant(CPCA) are not supported for Google Chrome.
•Table 2 lists software required for correct browser configuration.
Table 2     Software Required for Correct Browser Configuration on Administrator Workstations for Cisco Unity Connection 8.x
Browser Required Software
Firefox
The following software, depending on the operating system:
•With Mac OS X:
–Java 2 Platform, Standard Edition (J2SE) Runtime Environment 6 (1.6.x).
–Java Embedding Plugin for Mac OS X version 0.9.5 or later.1
•With Linux:
–ALSA driver version 1.0.9 or later
–Java 2 Platform, Standard Edition (J2SE) Runtime Environment 6 (1.6.x) .
•With Windows, Java 2 Platform, Standard Edition (J2SE) Runtime Environment 6 (1.6.x)
Internet Explorer
Java 2 Platform, Standard Edition (J2SE) Runtime Environment 6 (1.6.x)
1 The Java Embedding Plug-in for Mac OS X is bundled with Firefox versions 1.5.0.1 and later.
Note Cisco Unity Connection Web Interface drop down menus: Cisco Unity Connection Administration(CUCA) and Cisco Personal Communications Assistant(CPCA) are not supported for Google Chrome.
From;
System Requirements for Cisco Unity Connection Release 8.x
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp512623
Cheers!
Rob
"When it comes to luck you make your own "
- Springsteen

Are there compatibility issues between Logic Pro 9 and Mavericks?

As the marker passes over the Arrange-window (when playing or recording) it leaves the space behind it black. Does anybody know why this happens and how to deal with it? I haven't yet had any other problems (besides the usual loss of some EXS-samples.

Only Logic Pro 9.1.8 is officially supported under Mavericks. So: update!

Compatibility issues using CS5 on Apple Mavericks?

Are there compatibility issues using CS5 on Apple Mavericks?

XP is not supported using Boot Camp and Mavericks. http://support.apple.com/kb/HT5634.
The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Dixcussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
In any case, start by going to the editor preferences>general, clicking this button and restarting the editor:

USING PHOTOSHOP ELEMENTS 9 WITH WINDOWS 7 CURSUR ISSUE

USING PHOTOSHOP ELEMENTS 9 WITH WINDOWS 7 I HAVE THREE SMALL BOXES FOR A CURSOR IN PLACE OF A SMALL ARROW. HOW CAN I CORRECT THIS ISSUE. I HAVE LOADED THE TWO PATCH FILES THAT ARE NOT RAW FILE RELATED BUT I STILL HAVE THE ISSUE.

First all, please don't write in all caps. Dificult to read and very rude, it's like shouting.
Secondly, you're in the wrong forum. You want the Elements forum:
http://forums.adobe.com/community/photoshop_elements?view=discussions

Is there an upgrade to Photoshop Elements 5.0 for use with Windows 8?

Is there an upgraded to Photoshop Elements 5.0 for use with Windows 8?

yes, photoshop elements 11 should be compatible with win 8 and there is an upgrade path here: http://www.adobe.com/products/photoshop-elements.html
(compatibility info: http://www.microsoft.com/en-us/windows/compatibility/en-US/CompatCenter/ProductViewerWithD efaultFilters?Architecture=X64&CurrentPage=0&TotalPages=-1&ShowCriteria=10%20Results%20Per %20Page&SortCriteria=Relevance&IsSearchWithinFilterAvailable=False&FilterByCompatibility=A LL&TextSearch=Photoshop&AbsolutePage=-1&LastRequested=13&LastSearchTerm=Photoshop )

How can I measure selected area of pixels using photoshop elements 12?

how can I measure selected area of pixels using photoshop elements 12?

Show the 'information' panel F8).
In the middle horizontal section, select 'pixels' on the left drop-down menu.
Use the rectangular marquee tool to select your area: the dimensions in pixels of the rectangle is shown under 'dimensions' on the right.
I think there are other ways to measure a line segment, but you could use the above measure by adjusting the rectangular marquee tools to both extremities of the segment,
- use the move tool to rotate the rectangle so that the diagonal measuring the segment is horizontal,
- move the rectangle to the left, and check validate, which creates another rectangle including the first one
- read the pixel dimension (L:) in the info panel like above.

I am using Photoshop Elements 11. Do all .jpg formatted file have to be retangular in shape? I want to create an oval .jpg picture to insert into a book. Haven't been able to do so. It would work if I could make the area outside the oval completely tr

I am using Photoshop Elements 11. Do all .jpg formatted file have to be retangular in shape? I want to create an oval .jpg picture to insert into a book. Haven't been able to do so. It would work if I could make the area outside the oval completely transparent. Can anyone help me here?

JPG does not support transparency, so even if you create an oval with transparent background, the saved JPG will have white background. Instead, save it as a PNG, TIFF, or GIF which preserve the transparency.
Here is one of many ways to create your oval:
Create a new file the approximate size of the oval. Add the oval with the Custom Shape Ellipse tool, and simplify the shape layer.
In the Layers Palette, Ctrl-click the oval to select it and copy the selection to the clipboard (Edit > Copy).
Then do File > New from Clipboard. This creates the oval with transparent background cropped to the oval size.
Then save it as one of the file types that support transparency (and also supported by the application where you are sending the picture to).
Note: Is is not even necessary to do step 2. That is only if some reason you want the oval to be tightly cropped. It is sufficient to delete the Background layer in step 1 (or turn off its visibility) and save the file. The oval will appear correctly in the book with either version.

Are there compatability issues using Photoshop Elements 7.0 on a 64bit operating system?

Similar Messages

Maybe you are looking for