Are there DASYLAB 6.00.07 hardware drivers for the NI USB-9215

I'm working with Dasylab 6.00.07. Do you know whether there are allready any hardwaredrivers for the NI USB-9215 ?

At this time, DASYLab only works with NI hardware via the traditional NI-DAQ interface. Any board that is not supported via NI-DAQ will not work with DASYLab V8.
The data sheet for the USB-9215 says:
USB-9211 and USB-9215 devices each come with a ready-to-run
data logger application that acquires and logs up to four channels of
analog data. For more functionality, the NI-DAQmx Base driver
software is a multiplatform driver with a limited NI-DAQmx
programming interface.
This says that it is not supported via NI-DAQ, and is not currently supported by DASYLab.
We are actively working to ensure DASYLab's support for the DAQmx interface - watch for updates of the software!
Please note that new driver support, such as this,
will require an upgrade to the released version of DASYLab. It is not possible to update V7 or earlier with the changes required to fully support DAQmx.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Similar Messages

Are there LabVIEW drivers for the MCC USB-501 temperature logger

I am looking to purchase the MCC USB-501 and use it to acquire the ambient temperature on an event driven basis. The data logging portion is something I am interested in, I just want to have my application acquire the tempture when a certain event occurs. Does anyone have any LabVIEW drivers for this device?

I don't know what you mean by using a logger that collects data on an "event driven basis".
It is nifty little device, but it basically does one thing. It logs data. You load the software, configure it for when to start an how often to log data, unplug it, and put it where you want to log the temperature. When you're done, you get it plug it back in and download the data that was logged.
There is no way to configure it to react to events. It's possible that a LabVIEW driver exists for this, but all it would do is provide an alternate way of downloading the data instead of using the software that comes with it. It is not an immediate or interactive piece of hardware like a normal data acquisition card would be.

Are there any examples of queres or reports for the Access DB TS can generate?

I am currently useing the default TestStand SPC database storage routine to store the results of all runs. Are there any tools, queries, reports, etc. to help me post process this database? I thought I would check here before making something myself. Mainly looking for something that will do a scatter plot for a certian test so I can see where all the data is falling within the limits.

Currently NI does not have any post processing tools to assist you in formating the result information specifically for TestStand databases. Obviously using LabVIEW or LW/CVI or some other programming language you could write your own program to do such post processing.
Scott Richardson - NI
Scott Richardson
National Instruments

Are there any known good home phone systems for the Home Phone Connect

I've had the Home Phone Connect now for several months. I have had a Panasonic KX-TG7641 for a good while now. I bought this system to connect a cell phone through the Bluetooth to make a receive calls at home. This cell phone stayed docked in the charger next to the Panasonic base station. There were a few extra steps involved in order to make calls using the Bluetooth and every time my mother-in-law visits it is an extensive training process to show her how to use the phone. Every. Time. She. Makes. A. Call.
I saw the HPC and figured I could simplify the system and since the cell we kept connected was off contract, I got the HPC for free and signed up for 2 years with it. This was a mistake. While I can always hear the callers on the line, they sometimes report that I am too garbled to understand. Today I knew I was going to be on the phone on hold for a while, so I used my home phone handset for comfort (vice holding my Galaxy up to my head for an extended period of time)
After a 30 minute on-hold with the Veterans Administration I finally got through to an operator who informed me she could barely hear me/broken and garbled. Where I have my HPC at it is right in a window and I have steady 2 bars on it always. I told her I could call back on my cell phone, but she insisted we power through it so I wouldn't have to wait again on hold. Well we eventually made it through the call.
After hanging up I used my Google powers to see what the issue it/how to fix it. It appears that the people that have issues when using the HPC also have Panasonic phones/base stations connected to it. This might be because Panasonic phones are widely available and are the most common ones in use, but it might also be in that something is incompatible between the 2 systems. Odd, since the way it connects is similar to an old POTS. Could it have something to do with the DECT 6.0 that hey use (on the 1.9GHz band) where other older devices use standard 2.4 or 5.8?

Thank you for the tip. Sorry if it's the wrong forum. I don't post here often. I searched for the Home Phone Connect under devices and found it under "Other" so figured this was the best place to post it. Could you point me to the correct place for the HPC discussions?
I'll double check later when I'm home on my computer to see iff the problems being reported are all using the DECT 6.0 (1.9GHz). Might be causing some interference of some sort.

Drivers for the Apple External Modem in 10.5

Hi all! I recently upgraded my system with Leopard. All seems to be great save for the fact I can't use the external Apple USB modem attached to my Macbook Pro. While I don't fax that much I do sometimes have to use it to receive faxes and such from others. Is there a driver update for this for Leopard? Thanks to all in advance for the help!
Lance

The drivers for the Apple USB Modem are already installed along with Leopard..... I'm not sure why its not working.
Try opening up System Preferences - Network, and see if it shows up/if its enabled.
Other than that, I don't see why you should have any problems.

Need WXP hardware drivers for Satellite L40-139

Hi!
It seems that there are no XP drivers available for the Satellite L40-139.
Could anyone please tell me where I can download drivers for the following devices:
-Satellite L40-139
-Audio device
-Graphics controller
-ACPI controller!
-Some chipset drivers (?) (PCI Subsystem or something)
I should really appreciate any help!
Kind regards!

Hi,
unfortunately there are no drivers available from toshiba at the moment, but you can try using generic drivers from the manufacturers of the hardware
(e.g. if the soundhardware is a realtek soundcard then download drivers from www.realtek.com and so on..) and run the machine with these drivers.
Here are some link which could perhaps help you:
Video drivers
http://www.laptopvideo2go.com/
http://www.omegadrivers.net/
Chipset drivers
http://www.intel.com
Sound drivers
http://www.realtek.com
I hope you can find the drivers you need..
Greets

Are Graphics Drivers for the Thinkpad Edge E520 going to be brought up to date?

The Lenovo supplied drivers for the Radeon 6630M installed in the E520 haven't been updated since early 2012. Meanwhile ATI released v14 of the drivers just a few months ago (mid 2014). The E520 is now 5 versions behind with it's drivers, and the ATI supplied driver is incompatible.
Does Lenovo have any intention of releasing a compatible version of the latest drivers for the 6630M or are we supposed to muddle along without further support for this piece of hardware?

There are other problems with the old drivers.I can upgrade IE10 to IE11 due incompatibily with this hybrid graphics driver.
I can't update the lastest IE10 security updates for July 2014 due to incompatibily with this hybrid graphics driver.
I'm sure upgraing to IE12 will fail as well.
In January 2016 Microsoft will stop support for IE10 on Windows 7.:
http://blogs.msdn.com/b/ie/archive/2014/08/07/stay-up-to-date-with-internet-explorer.aspx

Are there any new All-in-one printers for sale that use the CLI-221 cartridges?

We have a MX870 Printer that needs to be replaced but new cartridges were just purchased from Canon. Are there any new All-in-one printers for sale that use the CLI-221 cartridges?
Thanks,
Margaret

The MX922 (known as the MX926 in Australia) is supported by 10.10 and Windows 7. Whatever site you were looking at may not have updated their details. Here is a link from the Canon Australia web site showing the drivers and applications for this model for 10.10.

XP Hardware drivers for PXI-8156B

Where can I find the drivers for the PXI-8156B.
I am undating the software to XP.
Thanks
Tony

Tony,
Since the 8156B came out significantly before XP was released, there are not any peripheral drivers specifically for XP. That being said, there are drivers for Win 2K, which may work with XP as well. Here is a link to the driver package on NI's FTP site: 8156B Win 2K Drivers. I hope these help, have a good day!
<-*DrkOvrlord*->

Why aren't there Windows 7 (64 bit) specific drivers for my HP color LaserJet 3600n printer?

Why doesn't HP support its own printers by providing drivers for a very stable operating system? I've been a longtime HP laser customer...since 1984 laser I. I would like to use drivers for my color LJet 3600n which were specifically written for my computer's operating system.
Does anyone know where there are Windows 7 (64 bit) drivers for the HP color LaserJet 3600n printer? Do I have to purchase Brother or Canon or Lexmark printers to get support?

Oh, you must not be on the English US site. Basically it says to use the Vista driver and gives a link to it. That is as good as it gets at this point, sorry.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do i find my newest itunes tv downloads, in my video app. In the OS7 all my purchases are there so i can find which onw is the new ones?

How do i find my newest itunes tv downloads, in my video app. In the OS7 all my purchases are there so i can find which onw is the new ones that i have not watch

Well blow me down & keelhaul me! I've solved my own problem. The issue appears to be that Apple won't sync Smart Groups from Address Book to the iPhone. I created a test group with a few dud contacts in Address Book; iTunes sync'ed then OK & as soon as I went into Contacts on iPhone, there suddenly was the Groups button appearing with 2 Groups - my Test Group + all Other contacts. Nice one apple - another undocumented feature! Looks like I have to do away with the Smart Groups feature & convert them all to normal Groups in Address book - bugga!

How do i find my newest itunes tv downloads, in my video app. In the OS7 all my purchases are there so i can find which one is the new ones that i have not watch M

How do i find my newest itunes tv downloads, in my video app. In the OS7 all my purchases are there so i can find which one is the new ones that i have not watch

Hi Bill...
Read here > Creating an iCloud account: Frequently Asked Questions

Is there a way to have hardware acceleration without the text font change? + Eye straining firefox!

Is there a way to have hardware acceleration without the text font change? I remember there was a way to go into settings before and getting hardware acceleration to work without the font change. Unfortunately I lost ALL my previous setting when uninstalling the beta ver Nightly and clicking delete settings :(.
Also, I fixed a problem before where firefox was visually eye straining to me, I think it was some settings in anti-alias tuner, but I cant seem to find the right settings that puts less strain on my eyes, anyone know? Thanks ahead. Currently using FF7.

Try to toggle some Boolean gfx.font_rendering prefs on the about:config page to disable some features.<br />
Filter: gfx
Others to try:
* set gfx.direct2d.disabled to true to disable Direct2D
*Anti-Aliasing Tuner: https://addons.mozilla.org/firefox/addon/anti-aliasing-tuner/

Are there any information gathering tools or scripts for Sun VDI 3.1.1?

Hi,
Are there any information gathering tools or scripts for Sun VDI 3.1.1?
for problem reporting or service supportting , such as
ut_gather, a ksh based tool to collect all Sun Ray related information from a Sun Ray server.
http://www.sun.com/bigadmin/jsp/descFile.jsp?url=descAll/ut_gather_1_4_6
http://www.sun.com/service/gdd/index.xml
Sun Explorer Data Collector in The Sun Services Tools Bundle (STB)
http://www.sun.com/service/stb/index.jsp
http://www.unix-consultants.co.uk/examples/scripts/linux/linux-explorer/
http://www.slideshare.net/Aeroplane23/information-gathering-2
Windows MPSreports, msinfo32
Redhat sysreport
Suse Siga reportconfig
Any advice would be appreciated.
Thanks,

ut_gather versions are available on MOS under reference #1260464.1

I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

Are there DASYLAB 6.00.07 hardware drivers for the NI USB-9215

Similar Messages

Maybe you are looking for