Are there genuine replacements available for battery in late 2008 macbook pro?

are there genuine replacement batteries available for a late 2008 macbook pro?

Probably your only hope, based on your description, is a SMC reset:
http://support.apple.com/en-us/HT201295
Note that you can contact Apple and ship your MBP to them for evaluation and possible repair. That may be easier than a trip to the Apple store.
Ciao.

Similar Messages

Replacement hard drive for late 2008 Macbook Pro

I need to replace my drive in a late 2008 Macbook Pro 15". I can access the battery and what looks like the hard drive from the underside, if this helps. Would this be a good replacement choice?
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136279
Finding exact specs for the drive has been tricky, or maybe I just need to have the physical size verified. What I know/have found is:
5400rpm       (would a 7200rpm improve performance, or am I limited by hardware?)
SATA II        (does this matter tese days?)
2.5" drive   (needs verification)
open drive? (do I need this or not?)
Any other options or advice? I'd like to spend a small amount since this is an older computer and won't be around a whole lot longer anyway. Thanks in advance!

The link you posted above is for a WD drive,....dont get it.   WD drives (some) have SMS sensor coflicts with Mac, and the consumer grade western digital HD are the worst you can buy.
Same as used by Apple below, best option, cheapest price.
best likewise replacement 1TB 9.5mm Toshiba
http://www.ebay.com/itm/Toshiba-1TB-MQ01ABD100-HDKBB96A1A01-2-5-5400RPM-Laptop-N otebook-9-5mm-HDD-/171120091488?pt=US_Internal_Hard_Disk_Drives&hash=item27d78d 6 160
$68
Stockdizzle
I will need to clone the current drive before it fails; is there an article in this forum on that?
Easy, 3 clicks and sit back and let Superduper CLONE your HD.....about 40 mins average.
Superduper is free and most of the pros use it (or carbon copy cloner)
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
See instruction and get software there<     very very easy to do

New macbook pro battery for late 2008 macbook pro dies fast.

I have a late 2008 macbook pro 2.4 HGz Intet Core 2 Duo with 2 GB of ram. I've had it since 2009 and just got a new battery, as the old one finally gave up. That being said, the new battery dies quite fast and I'm not sure why. Any suggestions would be greatly appreciated! thank you

Only problem is that maybe the battery you were sold was manufactured around the same time as the Mac. And LiPo batteries die because of old age as well as use. Take it out and carefully examine all markings, especially anything that can date when it was made, like copyrights or such.
With that evidence you can go back and demand a refund.

Renewing a Late 2008 MacBook Pro: hard drive and battery substitution

Hi all,
I am an happy user of a late 2008 MacBook pro.
However, with the passing of time, it became slow and the battery also deteriorate (it still quite OK, but it is not like at the beginning).
But let's start from the beginning: the hard drive
By googling for a while, I noticed that several people experienced very slow performance of their late 2008 MacBook Pro. That is also my case. Apparently, this is due to the hard disk which is dying, and then I considering to change it. However, I haven't found answers to these questions:
- Is it possible to mirror all the containt of the current disk to the new one?
- I only have the original installation disks of the first Leopard. I made all the updates through the network. Moreover, since it passed lot of time, I am afraid that some sector of the installation disks may be damaged. This means that I may fail in the installation of Mac Os X on the new hard drive. If I have to reinstall everything from scratch with the new hard drive and without installation disks, how should I do?
- If I go a Mac Reseller shop, will do they perform this operation? And how much does it costs to make it? Or I may also go to some generic computer reparation guy?
- Is it convenient to save all the data (movies, documents, pictures, emails, etc) somewhere (e.g. external HD) and then perform a completely new installation?
Next, let's consider the battery.
Here is a screenshot taken with iStat Pro:
Do you think it is worth changing it? From System Profile I have those other info:
Full charge capacity (mAh):          3386
       Current (mA):          846
       Voltage (mV):          12029
Condition:          Replace soon
What do you suggest to do then? How much does it cost a new battery? Actually, I think that also the processor performance deteriorate (it often becomes very hot, especially when watching Flash or Silverlight stuff), but, unfortunately I cannot change it.

Hi!
Thanks for all the answer. Please let me to resume this old and interesting discussion.
After having evaluated several solutions (including NAS, different ways of backup, etc) I bought an external firewire HDD, since I believe it nicely fits my necessities. Next, after these holidays, I will finally replace my old HDD with a SSD one. I think 120 GB are ok. I just need the apps and small-sized documents (rather LaTeX, Matlab, word, pages or excel documents, etc. - no movies or mp3 (I have Spotify, for that) ). Large files (e.g. movies, pictures, etc) may end up in external firewire HDD.
Now, let's consider the OS. I currently have 10.6.8 and I am very satisfied of that. I find it very stable, and all the apps I need are still well supported. On the other hand, given that there are like 5 years that I have the same installation, I may have a lot of obsolete files and setting that I can safely remove. This means that once I will have performed a backup of my documents, my email, my pictures etc. I can safely throw away all the rest. Hence, I may perform a brand-new installation of the OS. Although I am happy with 10.6.8, I was wondering if it is worth to upgrade it (I have a 2.53 Ghz Intel Core 2 Duo - 4 GB 1067 Mhz DDR3 RAM) to Lion, Mountain Lion or Mavricks. In that case, which would be the real benefits? And what about the cons?
Finally consider that I only have the Leopard installation disks from 2008 (not even Snow Leopard) and I will bring my laptop to a techician to change the HDD (I know, it is simple but I don't have all the screws etc. and I will not buy them only for this purpose). Once he will have replaced the HDD, will he re-install the OS also? Or I have to reinstall the OS through my original DVD (5 years old, I don't even know if they still work) and upgrade to Snow Leopard again by myself? I would exclude the carbon copy solution since I may want to throw away a lot of garbage and perform a brand new instalation of the OS. How to proceed? Thanks again!

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

How many hours does a brand new battery last after fully charged. I have a late 2008 Macbook Pro.

clintonfrombirmingham is right, there is no way to exactly tell. But from personal experience, a new battery on a 2008 will last for about 2 1/2 hours with a higher screen brightness and doing something taxing to the battery (like gaming or running lots of 3D programs). But if you're just listening to music with the brightness all the way down, and no programs running, you could get up to 12 hours. So for average use, it should last you a whole business day (assuming you don't use it more than 30% 0f the time). Hope this kind of gives you more of an idea of what to expect:)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

How to update graphics card drivers for late 2008 macbook pro with Nvidia 9600m GT?

Can anybody help me update the drivers for my 9600m GT graphics card for my Late 2008 Macbook pro? I am running OS X Lion 10.7.5 with a Windows 7 partition. I have tried finding support on Nvidia's website, but at least for the 9600m GT, it isn't supported for my operating system. Would I have to update it from my Windows side? And if so, would the update apply to my OS X side as well? I have a little computer knowledge, but nothing indepth.

Welcome to Apple Support Communities
In OS X, Apple provides the GPU drivers and you cannot update them from NVIDIA. They are updated with each OS X update, so you are running the most recent drivers for your OS X version. OS X Mountain Lion and Mavericks have got more recent GPU drivers, but it's not worth upgrading unless you need newer drivers for an app (I highly doubt this).
However, you can update the GPU drivers in Windows, and you should do it to get the best performance. You can download them from the NVIDIA site > http://www.nvidia.com/Download/index.aspx?lang=en-us Note that drivers are only applied in the operating system you are installing them, so they will not be installed in OS X

Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
4SNS/1/40000000 LB1T
I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer. Would you know how I can find the sensor to test it? Could my battery problem be related to something else? Would a fresh install of Lion help?
Thank you!
Mike
Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

Why do you have LION installed on that older machine?
So you say you built a macbook from a bucket of parts eh? Kudos
heres a pic of the battery temp sensor

HT4718 I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive,crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465)

Keyboard Mappings for Late 2008 MacBook Pro

Hi
I have found the keyboard mappings for older models of the MacBook Pro (shown below) but I can't find the same article for the new keyboard on my new late 2008 MacBook Pro.
http://support.apple.com/kb/HT1220
Thanks!

Hey Bigtalex712!
I have an article here for you that can provide some troubleshooting steps for this issue:
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
http://support.apple.com/kb/TS1248
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Is Snow Leopard recommended for a Late 2008 MacBook Pro?

Will Snow Leopard work on my Late 2008 MacBook Pro?
Any cautions or advice?
Have any of the Top Users upgraded to Snow Leopard yet? If not, why?
Thank ya!

You might check to see if all your apps and system add-ons you commonly use are compatible first. If that's your only computer, you might wait a bit yet.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Are there any patches available for Dev 21

Hi,
We've been working with Forms50 and Reports 25 under win95 for
quite a while and have noticed occasional problems:
- A program abort due to page fault protection under win95.For
example, R30DES32 : R30LIB.dll.
- You issue compile all and get and error that forms is not
able to go to (goto error button).
- A compile error that requires login in and out and
recompile to fix.
I wonder if
- there are any patches available for Dev 21,
- i have a memory shortage problem,
- these are (especially case 1) win95 problems.
Please help will be welcomed ................!
null

Where can I find them?
thanks in advance,
Xiaolin
Jason Judge (guest) wrote:
: There are patches for the 32bit v2.1 Windows environments
dated:
: 24 June 98
: 5 August 98
: 16 September 98
: 21 Octomer 98
: 21 February 99
: and I believe a new one is just out.
: Take your pick!
: JJ
: Luis Medina (guest) wrote:
: : Hi,
: : We've been working with Forms50 and Reports 25 under win95
for
: : quite a while and have noticed occasional problems:
: : - A program abort due to page fault protection under
: win95.For
: : example, R30DES32 : R30LIB.dll.
: : - You issue compile all and get and error that forms is not
: : able to go to (goto error button).
: : - A compile error that requires login in and out and
: : recompile to fix.
: : I wonder if
: : - there are any patches available for Dev 21,
: : - i have a memory shortage problem,
: : - these are (especially case 1) win95 problems.
: : Please help will be welcomed ................!
null

How to care for battery in non-unibody macbook pro

I have a non-unibody 15" macbook pro 4,1 running 10.6.8. i'm not sure the year it was made [is there a manufacture date anywhere on the machine?].
the included battery finally completely died on me 4 days ago and i ran it solely off the ac power until yesterday, when i got paid and bought a new battery.
aside from calibrating the battery [charge to 100% -> discharge to sleep -> recharge to 100%] as the first thing, what can i do to make this battery last me a long time?
the internet seems to suggest that the machine should generally be left plugged in if near a power source- basically, nearly all the time. is this true?
assuming it is true, how often should i exercise the battery and how much? i should run it down for what percentage per day or week?
thanks!

I keep my MBP connected to AC as much as possible. I do not expect to get the maximum cycles out of it, but I will get it to last as long as possible. So far I have 4+ years on my 2006 MBP with 33 cycles.
Do 'exercise' it about every 4-6 weeks to about the 40% level
Here are a couple of support articles that you may find informative.
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/notebooks.html
Ciao.

Where can I get replacement screws for the bottom of my MacBook Pro?

I have a late 2011 13 inch MacBook Pro. I recently upgraded it from the stock 500 gigabyte 5400 RPM hard drive to a 750 gigabyte 7200 RPM Seagate Momentus XT Solid State Hybrd drive. When I was putting the screws back in the bottom case I lost one of the small screws. Now the bottom case of my MacBook is little loose due to the missing screw. Where can I get a replacement screw?

PowerBook Medic has screw sets:
http://www.powerbookmedic.com/xcart1/_search.php?is_hc=Y&mode=search&q=screws
iFixit:
http://www.ifixit.com/MacBook-Parts/MacBook-Screw-Set/IF186-027
eBay:
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=macbook+screw+set

Are there genuine replacements available for battery in late 2008 macbook pro?

Similar Messages

Maybe you are looking for