Are there instructions to uninstall Elements 7 and Elements 10

Hello,
Could somebody please help me? I purchased a new laptop and I have to return it because it's been giving me a lot of problems. I have to uninstall Elements 7 and Elements 10 before I return it.
Are there specific instructions and links to uninstall these 2 programs?
Or, can I just use the Windows uninstall programs to completely uninstall them?
Thanks for your assistance!

Barbara B. wrote:
Oh, you don't go to regular support for activation. If you're in the US, you just call this number:
Software activation
866-772-3623
Available 24/7
Good morning, Barbara.
Oh I see, I didn't know that. I called the regular 1-800-585-0774 number. I had to wait for 18 mins to get a regular person, which then put me on hold for another long time, then she transferred me - and the line just kept on ringing and ringing. All in all, I waited for 1 hour and 5 minutes, until I went to chat with the Adobe lady - even while I was chatting with her the phone just kept on ringing. So, no, I'm not impressed with the kind of phone support they gave me.
Thanks for the number. After your last message I decided to just uninstall the thing. Then I uninstalled a couple of other things and ran a System Restore. The laptop is all packed and ready to go, I'll be going to the post office to mail it back to QVC in a little while.
Thanks for your assistance. Have a great weekend.

Similar Messages

Are there still bugs in Elements 4

Are there still bugs in Elements 4?
Looking at the feature list I am tempted to buy Elements 4. But I have read many reviews that indicate that it is "bug ridden"- most reviews are dated just after release. Have Adobe fixed the bugs now?
Advice very welcome...

Unfortunately you seem to be suffering from what has come to be known in PE4 terms as the "Goldilocks Syndrome". Do you remember when Goldilocks ate the porridge; one was too hot; one was too cold and one was just right. This went on with the beds etc. Well, it seems (from this very forum) that PE4 has a similar problem; if your computer is over specified (even with ALL the latest available drivers installed), it won't run properly; if it is under specified (even with ALL the latest available drivers installed), it also won't run properly, it has to be just right. There are people out there who's computers are just right, as we don't hear from them, obviously.
See if you can take your copy of PE4 back to the shop (they should have told you that a new one was coming out, well, if they were a good shop) and wait for PE7 which should have all the PE4 bugs worked out. They don't have to do much with the interface as it's already flawless. Very difficult to improve on the best. They just have to make sure it works on E-V-E-R-Y-O-N-E's computer.
Have a look at Steve's PE7 introduction video's on the Adobe website. That's how a software should work.
Best of luck.

Are there any compatibility issues with Sonos and Airport extreme??

are there any compatibility issues with Sonos and Airport extreme??

Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

Are there problems with Firefox 5.0 and 1Password 3.6.1?

I started to update to Firefox 5.0 and noticed a message that the version of 1Password that I had at the time would not work with Firefox 5.0.
Are there problems with Firefox 5.0 and 1Password 3.6.1?

They say that one needs 1Password 3.6.0 or newer to work with Firefox 5.0
http://forum.agile.ws/index.php?/topic/5319-firefox-5-requires-1password-360-or-later/
http://help.agilebits.com/1Password3/firefox.html

Are there updates for photoshop elements 2.0 for Windows 7?

I want use my photoshop elements 2.0 on my Window
s 7 computer. Are there updates for version 2.0?

No updates for pse 2, but pse 2 should run fine on windows 7.
(pse 2 came out long before windows 7, but runs better on vista and 7
than any recent versions of elements, go figure)
Install as an administrator.
The only exception to this is if your hard drive is bigger than 1tb,
then pse 2 probably won't work unless your version of windows 7
can use the virtual xp mode.
MTSTUNER
Message was edited by: MTSTUNER

Are there known issues with AICC interoperability and IE 8?

In the process of migrating lessons from Captivate 5 to Captivate 6, hitting a wall with AICC and IE8
I created and published a short 3 page quiz in Captivate 5. I then opened the Captivate 5 file in Captivate 6 and published it using the same reporting configuration as in the C5 version.
The C5 version of the lesson and the C6 version were both loaded into the LMS using the same LMS publishing settings.
The C5 version launched and scored and completed perfectly in IE8 and in FF 4.
The C6 version launched and scored in FF 4, but it only launched, but the status remained as "not started" in IE8
Are there any known issues or fixes for using AICC with IE8?
Both AICC and IE8 are required elements, SCORM or FFox are not options at this time.
I had a conference call yesterday with our LMS vendor and a support analyst from Rustici software, and they validated that my publishing settings in Cap 6 and in the LMS seem to be in line with recommended practices.
I created and published another short quiz using only Captivate 6, and got the same results - works under FF4, but not IE8.
Any help would be greatly appreciated.
Thanks,
Steven

This testing will not really address any cross domain issues, due to the content being hosted by ScormCloud.
What I found interesting, is that in ScormCloud, using the links below, my results were opposite those that I obtained through my LMS.
In LMS, Captivate 5 worked, Captivate 6 did not in IE8, both worked in FF
In ScormCloud, Captivate 5 did not work in IE8, but worked in FF, and Captivate 6 did work in FF and IE8.
Here are the links:
captivate 5 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=3c04f298-d0db-4d10-ab6 3-80b9aaf2890b
captivate 6 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=e2b05753-2f03-421a-87d 9-62b92ad199af
Thanks for your attention, every bit of information that I can get will help.
Thanks,
SL

Are there any tools for data encryption and decryption ?

Hi,
i am using oracle 9i R2, i want encrypt my data. Are there any tools available in market.
Please let me know the ways to do data encryption and decryption.
Thanks in advance
Prasuna.

970489 wrote:
using DBMS_OBFUSCATION_TOOLKIT.Encrypt /DESEncrypt we can't secure our password...So i am looking for an another alternative.As Blue Shadow said, what are you really trying to achieve?
Encrypting a password is itself not secure. Anything that can be encrypted can be decrypted. That is why Oracle itself DOES NOT encrypt passwords.
Surprised??
Here's what Oracle does with passwords, and what others should be doing if they have to store them.
When the password is created, the presented password - clear text - is concatenated with the username. The resulting character string is then passed through a one-way hashing function. It is that hashed value that is stored. Then when a user presents his credentials to log on to the system, the presented credentials are combined and hashed in the same manner as when the password was created, and the resulting hash value compared to the stored value.

Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
Thanks
Paul

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
tag. This not only gives points to the posters, but points anyone
searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...

Are there any differences between Server 2012 and Server 2012 R2 that might impact TFS or SQL server required for TFS?

Hi,
In the interest of just getting started and learning the basics of setting up TFS, I previously setup an IDE using a large workstation running Windows 8. I set up the required servers for TFS using VM's through Hyper-V. I am now transferring
everything to a new and separate physical server.
My question stems from a problem I had when I originally setup the TFS system the 1st time. I couldn't get SQL server to work using the Server 2012 R2 download from the subscription center. When I used Server 2012, it worked, so I proceeded that
way just to get going.
So now I'm setting things up anew on a new physical box, I want to ask up front, is there some difference in the R2 version that causes problems with either TFS or SQL server, or was there likely some oversight on my part when I did things the 1st time?
As an addendum to my question, I always assumed R2 merely means the Server software has progressed to a refined state and is ready for wide distribution and easy setup. I assumed that there are no differences between the Standard version and the R2
version. Is that understanding correct?
Thanks.

Hi Daniel,
Thanks for your response. That's a great link. I don't recall seeing a page that is so clear and easy to read back when I was doing this the 1st time, but I probably just missed it. That helps.
I am/was using TFS2013 and VS2013. As I recall, my problem was getting SQL Server to work, but I thought asking this question on this forum was wiser because I figured everyone using TFS would be well familiar with these issues.
At any rate, it seems as though TFS2013 is fine with Server 2012 standard or R2.
I was using SQL Server 2012, and it also seems as though it works on R2:
https://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
Anyway, thanks for your support. I'll be trying this again and we'll see.

Are there any APIs to load FND and other objects

Hi
We are having HR2HR configured and running between EBS R12.1.3 and Fusion. But the HR2HR does not bring in data in EBS like in Descriptive Flex Fields (DFF), User Defined Tables (UDT), Extra Information Types (EIT) & Lookups. How can we bring in this data in to Fusion. Are there any APIs? If not what is the Support model from Oracle if we are directly updating the tables?
Thanks!
Srinivasa Sunchu

Happy Camper: Based on doc 1482027.1 in support system:
DFF is not currently supported by HR2HR.An Enhancement Request (ER) has been logged to request this functionality:
ER: Bug 12883914 - ER REQUEST - DFF FLEXFIELDS AND EIT'S NEED TO BE INCLUDED IN THE HR2HR AND INTER
>
For alternatives and the Support model I do not have answer, will reach out to try to find out.
Kiran: This is an external forum, so the readers would not have access to internal documentation. Are the HCM scripts available externally i.e. through the support system? If not are there plans for providing them externally ?
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Are there a difference in late 2012 and early 2013 models of 13inch MBP retina?

checked my serial number and it happens to be late 2012 model which i bought 4 days ago, but are there a difference in early 2013 MBPR compared to late 2012?

i have the cheapest 2.5 model one
http://en.wikipedia.org/wiki/MacBook_Pro
at the very bottom table it states the model number mine is MD212 under there is 2.5ghz in late 2013
however on the early 2013 there are also 2.5ghz one but with different model number e.g.ME664

Are there any difference between iPhone 4S and iPhone 5? What are they?

What I already know is that iPhone 5 has a larger screen and is slimmer, but are there any difference between the two. I have iPhone 4S now, should I buy iPhone 5?

There are a number of major differences between iPhone 4S and iPhone 5, the major one being the processor speed. iPhone 5 has a much faster processor – two times faster than the processor in iPhone 4S. This difference is only significant if you use your phone to play high graphics games that require a lot of processing power. This processing speed also makes the applications load and run faster – iPhone 5 even boots in a shorter time than iPhone 4S. You can use iPhone 4S comfortably now but when games and graphic apps designed for iPhone 5 are released, you may be forced to upgrade your phone to run the smoothly.

Are there issues with Photoshop Elements 4.0 and Internet Explorer 8.0?

I recently upgraded to IE 8.0 and got a message that My catalog.psa file was missing. I recreated this file and then was able to open the organizer. My original tags, collection etc. were missing. I have done a search for any.pas file and cannot find the original extensive file I had that must have had about 2000 photos organized in that catalog. Because of Outlook Express issues at the same time of the IE 8.0 upgrade Microsoft backed out the IE 8.0 to IE 7.0 and this did not help me to restore my original My Catalog.pas file. I see two psa files associated with 4.0 : My Catalog-undo.pas and My Catalog.psa. If I tried to select the My Catalog-undo.pas I get the following message...There was a problem opening The Catalog named "My Catalog-undo.psa. Another user or application may have the catalog open, or one or more files may be missing, out of date, or damaged. The ODBC data source reported the following error: "[Microsoft] ODBC Microsoft Access Driver] The Microsoft Jet database engine cannot find the input table or query IdTable.' make sure it exists and that its name is spelled correctly.* Attempt to compact and recover this catalog, then open again? OK Cancel
Please help me understand what i must do to get my original My Catalog file installed. Thank you.

"I recently upgraded to IE 8.0 and got a message that My catalog.psa file was missing." Aside from the fact that IE 8.0 has nothing to do with PSE, I am extremely skeptical that the upgrade to IE 8 gave you an error message that your My Catalog.psa file was missing.
Your catalog may have been accidentally moved or deleted, but I refuse to believe that it has anything to do with IE 8. By now, there are many PSE users who have upgarded to IE 8, and I hear no complaints from them.
When you did the search, did you search in hidden folders? Usually, PSE puts its catalog into hidden folders, so you need to make sure you search hidden folders.
If you can't find the catalog file via searching in hidden folders, you might want to look in the trash can, or if that fails, try something called an "undelete utility" which may be able to recover erased files. There are freeware versions you can download.
As you discovered, you cannot recreate catalogs. Which means that you need to make regular backups of your catalog file and your photos, so if something accidentally happens to your catalog, you still have a recent copy. I am assuming that you have not done so. I am also assuming that whenever your fix this problem, you will begin making regular backups.
Good luck.

Are there practical limits on elements organizer catalog size?

I have 90K items in my PSE11 organizer catalog. I'm running Win8 and I'm getting nervious that catalog size will become an issue. Backing up the catalog is cumbersome since it is 337G. If I need to break it up into smaller pieces, what is the best way to do this? Is there a bridge or link between catalogs? Thanks

See:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Limits_on_the
and:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Splitting_and_rearranging
and:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Merging_Catalogs
The only real problem with big catalogs is what you have found : it's long and tedious to do backups. From the above links you can see that it's a bad idea to split catalogs, unless there is nothing common within them. Contrary to Lightroom, the organizer offers no satisfactory solution to merge catalogs. And the size of the catalog has no real impact on the speed of your organizing.
My suggestion would be to think about alternative backup procedures : anyway, if you want to upgrade to Lightroom, you'll have to choose your own backup system for picture files. LR only offers backups for the catalogs (database).
- Once you know where your big catalog is stored (menu help / system info) it's easy to create a desktop shortcut so that you can save the catalog itself. That's very quick compared to the backup of all your files (several hours).
- Consider using PSE incremental backups. I am not fond of them, but they are acceptable if you master the process : they save the database fully each time and let you restore to a given backup sesssion. Many users rely on incremental backups without understanding the process and are unable to do a complete restore in case of a big problem.
- Consider using external backup tools (as if you were with Lightroom). They can be easier and they offer automatic and periodic backup workflows. I am using Synctoy with Win7 and do periodic clones of my drives with Acronis
- Continue to use the integrated backup procedure when you have to change OS, computer, drives... and migrate all your pictures and catalog.

Are there design issues in declined payments and Family Sharing?

In Family Sharing, the Organizer is responsible for billing. If a purchase fails due to a billing issue the unpaid balance causes all iTunes to become inaccessible until corrected. The Organizer is not able to identify the cause and Apple recommends "logging in with other members accounts" to resolve the unpaid balance. Further, you must verify the billing information via the Organizer card security CVV code through the other members account,
Is Apple advocating sharing passwords given the need to "see member purchases." This seems odd because you are sharing the purchases.
If purchases are billed to the Organizers account, why are they unable to correct an issue within the family?
Is this the best Apple can offer?

I did see your other thread, but kept away from it because it seemed to be getting a bit heated. Some points I did notice:
People suggested that a design involving "thousands" of entities must be bad. This is neither true not nor unusual. An EBS database may have fifty to a hundred thousand entities, no problem. It is not good or bad, just necessary.
The discussion of "how many partitions" got stuck on whether Oracle really can support thousand of partitions per table. Of course it can - though you may find case studies that if you go over twenty or thirty thousand for a table, performance may degrade (shared pool issues, if I remember correctly).
There was discussion of how many partitions anyone needs, with people suggesting "not many". Well, if you range partition per hour with 16 hash sub-partitions (not unreasonable in, for example, a telephone system) you have 384 per day which build up quite quickly unless you merge them.
You own situation has never been fully defined. A few hundred million rows in a few TB is not unusual at all. But when you say "I don't have a specific problem to solve" alarm bells ring: you are trying to solve a problem that does not exist? If you get partitioning right, the benefits can be huge; get it wrong, and it can be a disaster. Don't do it just because you can. You need to identify a problem and prove, mathematically, that your chosen partitioning strategy will fix it.
John Watson
Oracle Certified Master DBA

Are there instructions to uninstall Elements 7 and Elements 10

Similar Messages

Maybe you are looking for