Are there LabVIEW drivers for the MCC USB-501 temperatur​e logger

I am looking to purchase the MCC USB-501  and use it to acquire the ambient temperature on an event driven basis. The data logging portion is something I am interested in, I just want to have my application acquire the tempture when a certain event occurs. Does anyone have any LabVIEW drivers for this device?

I don't know what you mean by using a logger that collects data on an "event driven basis".
It is nifty little device, but it basically does one thing.  It logs data.  You load the software, configure it for when to start an how often to log data, unplug it, and put it where you want to log the temperature.  When you're done, you get it plug it back in and download the data that was logged.
There is no way to configure it to react to events.  It's possible that a LabVIEW driver exists for this, but all it would do is provide an alternate way of downloading the data instead of using the software that comes with it.  It is not an immediate or interactive piece of hardware like a normal data acquisition card would be.

Similar Messages

  • Are there new drivers for the alcatel netstick for 10.8?

    Cant seem to be abel to use my netstick after I upgraded to osx mountain lion, it worked great before so figured I need new drivers, any help is welcome =]

    Check with Alcatel.

  • Are there DASYLAB 6.00.07 hardware drivers for the NI USB-9215

    I'm working with Dasylab 6.00.07. Do you know whether there are allready any hardwaredrivers for the NI USB-9215 ?

    At this time, DASYLab only works with NI hardware via the traditional NI-DAQ interface. Any board that is not supported via NI-DAQ will not work with DASYLab V8.
    The data sheet for the USB-9215 says:
    USB-9211 and USB-9215 devices each come with a ready-to-run
    data logger application that acquires and logs up to four channels of
    analog data. For more functionality, the NI-DAQmx Base driver
    software is a multiplatform driver with a limited NI-DAQmx
    programming interface.
    This says that it is not supported via NI-DAQ, and is not currently supported by DASYLab.
    We are actively working to ensure DASYLab's support for the DAQmx interface - watch for updates of the software!
    Please note that new driver support, such as this,
    will require an upgrade to the released version of DASYLab. It is not possible to update V7 or earlier with the changes required to fully support DAQmx.
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • Are there release notes for the new Flex Ajax Bridge?

    Are there release notes for the new Flex Ajax Bridge?

    Hello,
    You can find the release notes
    here
    . The wiki page has been updated as well to point to the release
    notes document, in the Where can I find out more section.
    Thanks for noticing they were missing,
    Cristian

  • Why are there two prices for the same audiobook?

    Why are there two prices for the same audiobook in iTunes?

    May be one is abridged and one unabridged ? or they just may want to get the suckers that think the more expensive one is better ... haha.

  • Are there any labview drivers for the chromalox 2030 controllers?

    I am looking for drivers to communicate with the 2030 chormalox environmental controllers.  I haven't been able to find any.

    I never did write anything for the Chromalox...lightning end up zapping it and we replaced the Chromalox with a Watlow. Check out the Product Instruction Sheet (PDF) at the link below. It's pretty basic, but might be enough to get you going. If not, I'd shoot an email to Chromalox and ask them if you have any communications manuals for it.
    http://www.chromalox.com/products/prodinfo/en/2030.html
    -- Jason (Matt)

  • Are there any drivers for Pocket PC and NI USB-6008 available?

    Hello everybody,
    I alraedy read that there are no drivers for Pocket PC available to communicate with NI USB-6008 or other USB devices using LabView PDA Module. The reason is that most Pocket PCs have no USB host functionality. It's a pity, because I'm using a e800 Toshiba PDA that provides USB host functionality.
    Furthermore I'm already using several NI USB-6008/6009 within applications developed with LabWindows and I would rather reuse these devices than byuing new ones like NI CF-6004. Perhaps NI offers a driver for Pocket PC - that would be nice.
    Does anybody share my opinion or have some suitable solutions?
    Thanks in advance.
    Sincerely
    Mario

    Hello Mario,
    we are aware that the usage of the USB port on PDA devices is a feature that becomes more and more important. But at the moment we do not support it. Unfortunately we do not have an NI-VISA driver for PDA which is used for the USB devices on the PC side.
    regards
    Ingo Schumacher
    Systems Engineer Sound&VibrationNational Instruments Germany

  • Where can I find Labview drivers for the RSA 3308A Spectrum Analyzer

    I need to use Tektronix's Spectrum Analyzer RSA 3308A as a LabView environment
    instrument for my school project, I would like to know if there are available
    drivers, if no drivers are available which are the implied software/software
    requirements to achieve this goal.

    NI doesn't have a driver and I couldn't find one on Tek's web site. That seemed kind of strange to me so you might want to contact Tek directly and see if they have something. If that comes up blank, you have several options. LabVIEW has the Instrument I/O Assistant (on the Instrument I/O palette), that will alllow you to create a series of writes and reads to an instrument and parse results. The assistant lacks flexibility but if your needs are fairly simple, it might be all you need. Of course, you'll need to be familiar with the instrument's command syntax. A step up the assistant is to use a series of VISA Read and Write commands. These would commands similar to what you would use with the assistant - tailored specifically for your application. You gain some flexibility because you can easily vary the command parameters with LabVIEW variables. At the top of the complexity ladder is developing a full blown instrument driver yourself. NI has some great tools to make this easier than it has ever been before. The guidelines and links to the tools can be found here. Lastly, you can request that NI develop a driver here. There is no guarantee the they will develop it as they base that decision on things like how many requests they get for a particular instrument.

  • Looking for a good note taking app: Are there new features for the Notes app in iOS6?

    Hi,
    I've read that the Notes app with Mountain Lion will be available for OS X as well, and I was wondering if there will be any significant updates to the Notes app coming in iOS 6?
    The Notes app in Mountain Lion supports, as far as I know, text formatting, images and attachments. The Notes app in iOS 5 does not have any of these features, yet still it is claimed that the OS X client will sync with the iPhone, iPad and iPod touch. This means that there must be some rather significant updates coming for the Notes app in iOS 6 to match up with the features of its Mac counterpart. Still, no updates to the Notes app are listed in any of the iOS 6 feature lists I've seen so far.
    I'm looking for a good note taking app for OS X and iOS. I don't like how Springpad works, neither did Evernote work out for me, it's just too complex - I like Simplenote a lot though, it's just that its approach is too radical in my opinion. I was thinking that the Mountain Lion Notes app might be a good alternative because it combines simplicity with rich text formatting and attachments. I kind of hate the skeuomorphic user interface though.
    best, Ian

    You are only addressing other iPad users here & no Apple employees. We have no way of knowing, so you'll have to wait until iOS 6 is released.
    Here's some general info.
    Working with Notes and Documents on the iPad – Alternatives & Suggestions
    http://ipadacademy.com/2012/04/working-with-notes-and-documents-on-the-ipad-alte rnatives-suggestions
     Cheers, Tom

  • Are there any drivers for NI's Audio 4 DJ that work with 10.7.4?

    I have been trying to get my system working with my dj equipment since I bought my Mac and I have had no luck. I have installed the Beta drivers from Native Intsruments' website, but I'm starting to wonder if there's something else going on. I am running an Audio 4 DJ with my 13" Macbook Pro that has a 2.90GHz i7 and 8GB of 1600MHz DDR3 RAM. I have been scouring the NI forums, but I think it may be best to turn to the Apple community on this one. Can anyone help? By the way, I just converted from an older Dell laptop to my nice, new Mac so I am still getting new to Lion and how it is laid out.

    Currently, there are no further updates to the AirPort software applicable to your base station.
    (24220)

  • Are There Any Themes for the Blackberry Tour Approved by RIM, or Not?

    I've already had one BB Tour bricked, and I had downloaded all apps through BB App World.  However, there appear to be ZERO themes on BB App World.  So themes are the one thing I downloaded OTA on various websites, including Crackberry.  Seeing that my VZW Tour came pre-loaded with 2 themes, I thought downloading themes was harmless.  Is it possible the themes I had downloaded could have crashed my phone?  Are there any websites with themes that are approved by RIM?

    All Themes at this point are not from RIM.
    With the release of the New Developer Software during the Last Conference soon RIM will have themes Approved and available for Download through App world. No ETA at this point though.
    Brownie
    Tour 9630
    IT Professional

  • Are there any updates for the original 4th generation

    My ailing mother has an ipod that she has had for years but has not registered it.  My want to see if there are some updates for the original OS.

    Sync it via iTunes and see if it shows any updates available.

  • Are there any checksums for the direct 10.10.1 download?

    Is there a checksum sh1, sh256 or sha512 for the direct download of the 10.10.1 update ( OS X Yosemite 10.10.1 Update ) provided by Apple somewhere?  Thanks k:d

    Hi Kim,
    At present, my program be modified as bellow :
    REPORT Z_TST_2.
    DATA : L_FILE LIKE RLGRAP-FILENAME,
    L_OPENMSG(1000) TYPE c,
    L_TEXT(1000) TYPE c.
    L_FILE = '/testfile/testfile.txt'. "ftp path
    OPEN DATASET L_FILE FOR OUTPUT
    IN LEGACY TEXT MODE CODE PAGE '8300'
    IGNORING CONVERSION ERRORS
    REPLACEMENT CHARACTER '#'
    MESSAGE L_OPENMSG.
    L_TEXT = 'A?B'.
    TRANSFER L_TEXT TO L_FILE.
    CLOSE DATASET L_FILE.
    Best regards,
    Eric
    Edited by: Eric Yang on Oct 15, 2009 10:58 AM

  • Are there blending modes for the layers?

    Like in Photoshop, is it possible to take on shape and blend (multiply, difference, soft light, etc.)the layers? I can't seem to locate it in Illustrator.
    Thanks all!

    Transparency panel.
    Layers in Illustrator don't mean the same as Layers in Photoshop. Think of Illustrator's Layers as equal to Photoshop's Layer Groups (folders in the Layers panel), with each object on an Illustrator equivalent to a Layer in Photoshop. You can change the Transparency Blend Mode of any object on a layer independent of the layer itself. If you click on the circle to the right of a Layer's name you can target that layer and change the entire Transparency Blend Mode for the Layer.

  • Why are there no updates for the 800w

    I know there were 2 patches early on. The voice command works about 80% of the time, so I guess that's better than nothing; I can't see any improvement in the usb charging / recognition behavior; or let's just say it's still extremely poor.
    I look at the Blackberry Bold forum and see that there are updates for that already; in fact it looks almost continuous. That is, there are signs of activity from BB and none from Palm.
    Post relates to: Treo 800w (Sprint)

    What I was kinda hoping for with this new upgrade was a news column in the ministore...I think most fans now realize that it's the studios fault (thanks to Debbstar and others). What people don't know (me included) is WHY??? We want to know what's going on insead of speculating. Is there a contract legal issue regarding schedule changes at Sci Fi? Does this have something to do with the syndications coming out? Or maybe something to do with SG1's cancelation?? Fans hate being left in the dark more than they hate not being able to download their shows...well, almost as much anyway Jesus, I am a geek now. I'm complaining about a science fiction show. Lets all go picket!!

Maybe you are looking for

  • Persistent blue screen of death problems on Toshiba laptop pc; need help

    hey, guys,  I was hoping you could help me out here.  I have been experiencing persistent blue screen of death problems on my Toshiba laptop since December 21 of 2014.  The first two times I started having theses persistent issues, I downloaded a bun

  • Enterprise Manager Issue

    Hello , When i am try to open my EM - https://<!!!>:1158/em/console/ It accepts user name and password but then after on next screen it shows "404 Not Found" Can any body help me out to resolve this issue :) Thanks - P

  • SAP annual maintenance contract

    Dear All, Could anyone help me and explain me about the consequences of not renewing the AMC contract of SAP. Thanks in advance. Regards, RAM

  • Two Submits - One Form - OK FF not IE

    I thought this would be simple I am submitting a form and on it are these two buttons and this works fine in Firefox: <input type="submit" name="stay" value="Submit" /> <a href="live_summary.php"><input type="button" value="Back"  /></a> However this

  • Automatic quality Notification during defect recording

    Hi Guru's We have two plants , Plant A will be using the default Notification - F1 , F2 & F3 , plant B will use Cust. Y1 , Y2 & Y3 , In t-code QF11 When activating notification type , system is picking the defaults , My client requirement is that Not