Are there some "waveform measurements" componet in LabWindows/CVI as in the LabVIEW ?

I want to use some"waveform measurements" function , but I don't familiar with LabVIEW ,
Is there a corresponding componet in LabWindows/CVI ?

This depends on your CVI version... the full development version includes the advanced math library, which provides functions such as PulseMeas to evaluate waveforms.

Similar Messages

Are there some "waveform measurements" componet in Measurement Studio for VC++ as in the LabVIEW ?

I want to use some"waveform measurements" function , but I don't familiar with LabVIEW ,
Is there a corresponding componet in Measurement Studio for VC++ ?

the following webpage may give you some help:
http://sine.ni.com/nips/cds/view/p/lang/zhs/nid/204741

Hi are there some who can help i am trying to update my programs in app store

hi are there some who can help i am trying to update garageband ,iphoto and iMovie on my iMac, but it´s not my apple id it will use to the update, so i dont now the email and the password for the email used, and i cant change it to my apple id
my problem started after i updated to maverick
i hope there are someone who can help ???

hi are there some who can help i am trying to update garageband ,iphoto and iMovie on my iMac, but it´s not my apple id it will use to the update, so i dont now the email and the password for the email used, and i cant change it to my apple id
my problem started after i updated to maverick
i hope there are someone who can help ???

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Are there some Font supporting all utf-16 code including all supplementary?

Are there some Font supporting all utf-16 code including all supplementary code?
In an application, I need to show some text encoded in utf-16, which is multilingual and
Have some of supplementary character, so want to know a font to show it correctly? While find nothing from the internet, so anybody can instruct me will be very appreciated！Looking forward to your response, thanks.
Message was edited by:
passenger2007

Probably not. you might find some fonts listed her that support what you are interested in.
http://www.google.com/search?q=font+that+supports+all+unicode+characters

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

Are there some standard education material for bpc

hi, are there some standard education material for bpc like BW300 BW350...
if so, where to download?
thanks

oops... i forgot that the doc is here :
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000088155&_SCENARIO=01100035870000000202&

Are there some movies situ Spanish subtitles in US I.tunes store?

Are there some movies situ Spanish subtitles in US I.tunes store?

In order to purchase apps from the U.S. iTunes Store, you need to 1) Have a valid billing address in the U.S., 2) Have a credit card billed to that address or have iTunes gift cards purchased in the U.S. and 3) be physically located in the U.S. at the time of purchase.

Is there some way to tell lightroom to just re-export the previously exported files?

Shot a celebration (Park, Mass and Party), went home and processed the raw files in Lightroom, Exported them into 3 folders.
Then I proceeded to edit the files in photoshop, first folder that consisted of the park went well. Files looks great, even after compressing them again.
Then up were the Mass pictures and that's where it all went down hill. When I loaded up the first image it was compressed to hell All the black areas were all pixelated, so I went into lightroom and sure enough it changed the quality from 100% down to 60%!
All my other settings were the same so I didn't accidentally reset the whole thing. Not sure why or how Lightroom did this, I've had it on 100% for the past 2 years!
Now I have to export them all over again, the trouble is there was 800 that I culled down to just 150. I really don't want to hand pick them all over again.
Is there some way to tell lightroom to just re-export the previously exported files?

The short answer: no.
Lightroom remembers recently imported files in a collection, but does not remember recently exported files.
That said, you could use the SQLiteroom plugin (free, by me) to round up a collection of *all* exported files, which might help.
Rob

Are there any free TV channels that can be received on the Apple TV?

Are there any free TV channels that can be received on the Apple TV?

No, it's not a TV tuner. It's primarily marketed as a rental vehicle for iTunes store movies/purchases and for playback of compatible (see specs) media from iTunes.
Some subscription streams are available eg Netflix, MLB as well as youTube and some limited internet content (no browser).
Check the Apple tech pages.

If VL are there to that particular VO,Is it necessary to extend the view li

Hi Folks
if VL are there to that particular VO,Is it necessary to extend the view links also while extending VO?
appriciate any pointers
Regards
Harry

hi
you dont need to extend the view links ,it will be taken care by VO extension ,but when you check VORow impl of standard VO ,there you will find the refence of all VO which are having link with this standard VO ,that code you need to copy paste in your extended VORowImpl .
Thanx
Pratap

My iphoto pictures are there but doesnot show them. I see them on the above line but the each individual picture is a blank

my iphoto pictures are there but doesnot show them. I see them on the above line but the each individual picture is a blank

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

We are having some problems viewing wide format drawings in safari on the ipad - The images view fine on the computer... Any ideas?

We are having some problems viewing wide format drawings in safari on the ipad - The images view fine on the computer... Any ideas?

No, the site isn't Flash-based; it's a site I've visited on the phone dozens of times. This problem only started occurring a few days ago.
I'm embarrassed to admit that the site is Popsugar.com, a celeb gossip site that I visit whenever I'm bored.

When I start firefox, the previous tabs are there but blank and say new tab, can I restore the tabs?

When I start firefox, the previous tabs are there but blank and say new tab, can I restore the tabs?
how can I do this?

I'm not sure what causes this.
As the first step, I recommend backing up your existing sessionstore files.
Open your current Firefox settings (AKA Firefox profile) folder using
Help > Troubleshooting Information > "Show Folder" button
Scroll down to the files whose names start with sessionstore. You should find at least sessionstore.js and sessionstore.bak. If the .js extension does not appear on sessionstore, you should turn off the Windows feature that hides file extensions from you, so that you can work with file names as accurately as possible. This Microsoft support article has the steps: [http://support.microsoft.com/kb/865219].
Make backup copies of all the sessionstore files to somewhere like your Documents folder for possible later restoration.
Next, try one of the data mining techniques in these posts to rescue the URLs from the sessionstore.js or sessionstore.bak file:
* Using Firefox's Browser Console (formerly known as Error Console): https://support.mozilla.org/questions/969046#answer-471950
* Using Firefox developer tool "Scratchpad": http://forums.mozillazine.org/viewtopic.php?f=38&t=622036&start=60&p=12098147#p12098147
* Using a third party website: https://firefox-session-restore.herokuapp.com/

HT4059 I'm using ibooks on an ipad mini. I am forever inadvertently advancing to the next or prior page without meaning to do so. Is there some way to require a double tap to advance the page, or to set the sensitivity lower?

I'm using ibooks on an ipad mini. I am forever inadvertently advancing to the next or prior page without meaning to do so. Is there some way to require a double tap to advance the page, or to set the sensitivity lower so that the page doesn't advance every time I move imperceptibly?

I'm using ibooks on an ipad mini. I am forever inadvertently advancing to the next or prior page without meaning to do so. Is there some way to require a double tap to advance the page, or to set the sensitivity lower so that the page doesn't advance every time I move imperceptibly?

Are there some "waveform measurements" componet in LabWindows/CVI as in the LabVIEW ?

Similar Messages

Maybe you are looking for