Are these key fields in 'Direct Update' DSO table in BW on HANA (BW740SP7) correct?

Pls see below for a very strange behaviour of all active tables of type 'Direct Update' DSO in our system.
Is this a bug or is this somehow supposed to be like this (i.e. a feature)?
DSO definition:
Active table of type 'Column Store' - note fields marked as 'Key' different from DSO definition:
The DSO table content:
In ABAP executing the following select on the DSO table:
The result is garbage (the content of QQQPARST0 lands in /BIC/QQQPAFL0 and QQQSCPRO lands in /BIC/QQQPARA0):

Dear Sundaresan,
thanks for this suggestion, but I have posted the question in the following forums:
SAP Business Warehouse: What is this with the 'Direct' DSO table in BW on HANA (BW740SP7)
SAP BW powered by HANA: Direct Update DSO keyfields in RSA1 <> SE11 & SELECT returns garbage
ABAP for SAP HANA: Direct Update DSO keyfields in RSA1 <> SE11 & SELECT returns garbage
So far no real luck but maybe soon
Greetings

Similar Messages

Loading complex report data into a direct update DSO using APD

Dear All,
Recently, I had a requirement to download the report data into a direct update DSO using an APD. I was able to perform this easily when the report was simple i.e it has few rows and columns. But I faced problems If the report is a complex one. Summing up, I would like to know how to handle the scenarios in each of the following cases:
1.   How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
      key fields of DSO and the remaining to the data fields? Correct me.
2.   What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
      system and then include these in the DSO data fields to accommodate the extracted data ?
3.   How do I handle the Free Characteristics and Filters ?
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
     use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
     shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
I would appreciate if someone can answer my questions clearly.
Regards,
D. Srinivas Rao

Hi ,
PFB the answers.
1. How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
key fields of DSO and the remaining to the data fields? Correct me.
--- Yes , you can use the elements in the ROWS in the Key fields, but in case you get two records with same value in the ROWS element the data load will fail. So you basically need to have one value that would be different for each record.
2. What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
system and then include these in the DSO data fields to accommodate the extracted data ?
Yes you would need to create new Infoobjects for the CKF's and RKF's in the Report and include them in your DSO.
3. How do I handle the Free Characteristics and Filters ?
The default filters work in the same way as when you yourself execute the reoprt. But you cannot use the Free characterisitics in the APD. only the ROWS and cloumns element which are in default layout can be used.
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
--- Yes you would need to create 10 different APD's. Its very simple to create, you can copy an APD. but it would be for sure a maintance issue. you would have to maintain 10 APD's.
Please revert in case of any further queries.

Direct update DSO filed is missing in RSINPUT

Hi Experts
I am facing an issue while maintaining data for Direct Update DSO.
I create a Direct Update DSO with some key fields and two data fields , the two data fields are the same type with'CHAR' and the same length with '01'. Actually , they are flags for different purposes.
when I am trying to maintain data for this DSO in t_code RSINPUT, only one data field presents.
as showing above , field RL000966 is missing in RSINPUT.
I need maintain two flags in one record , please tell me how to do?
Thanks.

Hi,
Check whether the infoobject RL000966 is an attribute only infoobject !!
If "attribute only" is checked then uncheck it and then try .
Regards.

How to delete the request in Direct Update DSO

Dear Gurus,
I have a situation where I have an invalid characteristic loaded into the Direct update DSO. This is related to Spend Performance Management. This DSO is loaded through a data source with the option Without Archive. So, I cant see any request in this DSO. This DSO will then supply data to another DSO which is standard DSO.
The data Activation job in the standard DSO is failing.
My question is I have to delete the request from the Direct Update DSO and then load it to Standard DSO. I have already repaired the data in PSA.
Your Kind help is greatly appreciated.
-Mohan Kumar

You must be using some fill or delete APIs to fill the data in Direct update DSO.You can't create transformation to fill the data in DIrect Update DSO as you do in Standard DSO.You will not see request number under the manage tab for direct update dso for any load.
Whenever you will fill the Direct update DSO next time,previous data gets deleted automatcally. For Direct update DSO there can only be a Full Update.So just load the data using API's and previous data will get deleted automatically
Edited by: shyam agarwal on Mar 2, 2012 7:48 AM

What are the key fields used to group double orders in t-code SDD1?

What are the key fields used to group double orders in t-code SDD1?
Cheers,
VT

Hi,
You can group the duplicate sales documents with the help of the following fields,
Sold-To-Party,Document type,date and sales area details.
Regards,
Gopal.

What are these Key Figures / Attributes

What are these Key Figures / Attribute? Could some one explain it?
$$PERIODIDCU$$
$$PERIODIDFR$$
$$PERIODIDTO$$
For example, one of it is used in SAP2 model, for Key Figure DEMANDPLANNINGQTY.
It has a calculation of IF("PERIODID" >= "$$PERIODIDCU$$", IF(ISNULL("DEMANDPLANNINGQTY@PERPRODCUST"),"MKTGPROMOTIONFCSTQTY@PERPRODCUST","DEMANDPLANNINGQTY@PERPRODCUST"),"ACTUALSQTY@PERPRODCUST")
Thank you.

$$PERIODIDCU$$ is a call to look up what the current period is based on the system date plus your current period offset configuration.
So the above formula says if the period ID that you are reporting on is greater than equal to the current period in the system (taking into consideration any offsets you may have configured), then do the subsequent logic.
I haven't seen the "FR" and "TO" syntax for period id, but I can only assume they are related to some sort of "from" and "to" range for period id.

What is the main difference of Direct update DSO and Write optimized DSO

What is the main difference of Direct update DSO and Write optimized DSO?

Hi chandra:
Check this link.
http://help.sap.com/saphelp_nw04s/helpdata/en/f9/45503c242b4a67e10000000a114084/content.htm
You can find another difference on page 147, section "Reclustering DataStore Objects" of the document "Enterprise Data Warehousing"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a?quicklink=index&overridelayout=true
>You can only use reclustering for standard DataStore objects and DataStore objects for direct update. You cannot use reclustering for write-optimized DataStore objects. User-defined multidimensional clustering is not available for write-optimized DataStore objects
Regards,
Francisco Milán.
Edited by: Francisco Milan on Aug 11, 2010 7:09 PM

F14, F15, F16 -- why are these keys on my Mac Keyboard ?

*** !!
Why are these keys added to my Macintosh Keyboard [circa September 2006] if the **** operating system won't allow us to use them ?
What the **** Apple ??

My 5+ year old keyboard has the F13 F14 F15 keys sitting all by their lonesome above the help, home, page up block of keys, and I set them to do the three Expose functions, so the system will use them (at least if you have the right hack). All the F keys used to be handier though, back in the OS 9 days, when I assigned them to do all sort of things.
Francine
Francine
Schwieder

Difference between - Write Optimized and Direct Update DSO

Hi Gurus,
I know the similarities of the Write Optimized and Direct Update DSO.
But I want to know what is the difference between the both.
Can any expert let me know the difference between the both please.
Thanks

Hi,
Write Optimised DSO:
Write optimsed DSO has been designed to be the initial staging of the source system data from where the data could be transfered to the standard DSO or the Infocube.
The Data is immediately written to the further data targets.We can save the activation time.Reporting also possible on this.
SAP recommends to use Write-Optimized DataStore as a EDW inbound layer, and update the data into further targets such as standard DataStore objects or InfoCubes.
Direct Update DSO:
Dat a store object for direct update conatains daya in a single version.therefore data is stored same form in which it was written to DSO for direct update by the application.We can use this type of DSO for APD.
In IP we can use this dso and directly we can enter the data using RSINPUT.
Thanks
Madhavi

Which are the Key fields in the iTunes Music Database

I assume that the iTunes Music folder is really a database for all the music. I further assume that this database has a Key Field (1 or more) which are necessary for it to function.
Which fields are these and what are their names??
I am still hunting for the songs that are missing in iTunes but are in the library.

Ignore the question. I found the missing files. Had nothing to do with "key fields". Thanks

How to Edit Key Fields or Delete Lines from Table Entries

Hi Experts
While releasing Transport Request Number we are getting an error during release. This seems to be as a result of improper data feed while running of eCATT's . The dates in the all these fields have been entered as " . .0101" which is in the wrong format ( eg. Table T811F u2013u201CSDATEu201D field). "SDATE" seems to the key field of the table . Can you please guide on how we may delete these lines or edit the field in the table.
Regards
Ananda

Hello,
I dont think its a good idea to delete the records from those standard tables. You rather re-run your ecatt and edit/update the existing records and try.
regds,
Kiran

Should we directly update receipts table AR_RECEIVABLE_APPLICATIONS

I had created some receipt methods which has wrong bank accounts allotted to ON-ACCOUNT and UNAPPLIED receipts. Now as most of you know, that once a receipt method is created, it is not possible to update accounts on it. you have to end-date old receipt method and create new one with correct account. That is the method i shall be doing to correct receipt methods for future.
HOWEVER for receipts already processed,i intend to update tables directly for the wrong accounts. Create Accounting run has not been done yet.
I just wanted to know if it will impact create accounting ?

I just wanted to know if it will impact create accounting ? It depends on what tables you want to update. Some direct updates are supported and some requires updating it using an API.
Please log a SR to confirm with Oracle support if you can update those tables directly or not.
Thanks,
Hussein

How to make a key field manadatory, in a Z-Table (SE11)

Hi,
I've created a Z-table is se11 and one of the key fields is IWERK. Now the user does not want this field to be blank when they enter data into the table via SM30.
Does anyone know how to make this field so that a blank entry is not acceptable.
Many Thanks!

Hi Robert!
One way would be to adjust SM30 to a mandatory field (in SE11 of course), but this field sounds like you can assign T001W as a check table. In the foreign key definition, you can give a error message, which is called in case of wrong entries in screens -> there is no empty entry in T001W, you can only maintain valid values and got a value list.
Regards,
Christian
P.S.: No, you need to change SE11->Table maintenance generator->Enviroment->Modification->Maintenance Screens->Element list->Tab Special attr. column Input. Set 'required'. Otherwise empty is still allowed
Message was edited by: Christian Wohlfahrt

Updating HRP table through abap codes - is it correct

Hi all,
In my hrp1001 table,I want that All Qualifications (Q) and Tasks (T) assigned to all the functional roles (ZF) existing in the system should be transferred to the positions(S) tagged to those respective functional roles.
For that I am supposed to write a code which copies the entries from Qualifications (Q) and Tasks (T) and tag the same to the positions (S).
Below is the sample code which is adding just one record to HRP1001 through abap statment. What I am curious to know is wheather it is logically correct to update HRP table through abap statments or no. If not, Please let me know what should we do as a solution - should we update all records through LSMW of PP01 or any thing else we can do???
REPORT ZHRPAR0005 .
TABLES: HRP1000, HRP1001.
DATA IT_1001 LIKE HRP1001 OCCURS 5 WITH HEADER LINE..
SELECT SINGLE * FROM HRP1001 INTO IT_1001 WHERE OTYPE = 'CP' AND PLVAR = '01' AND SCLAS NE 'S'.
IT_1001-OTYPE = 'S'.
APPEND IT_1001.
INSERT INTO HRP1001 VALUES IT_1001.
Thanks
Ribhu

Hi Ribhu..
there are various FMs available for this purpose..
use those... becasue if u directly insert, update or modify record in HRP1000 or HRP1001...
then some related table might not be updated..
So use FMs..
RH_COPY_INFTY
RH_CUT_INFTY
RH_DELETE_INFTY
RH_INSERT_INFTY
RH_INVERT_RELA_INFTY
RH_UPDATE_INFTY
<b>For IT 1001 </b>
RH_CUT_INFTY_1001_EXT
RH_CUT_INFTY_1001_EXT_GENERIC
RH_DELETE_INFTY_1001_EXT
RH_DEL_INFTY_1001_EXT_GENERIC
RH_INSERT_INFTY_1001_EXT
RH_UPDATE_INFTY_1001_EXT
RH_BASE_READ_INFTY_1001
RH_READ_INFTY_1001
RH_READ_INFTY_1001_EXT
RH_READ_INFTY_1001_EXT_ONLY
Reward if useful
Regards
Prax

Updating HRP tables through abap code- is it correct?

Hi all,
In my hrp1001 table,I want that All Qualifications (Q) and Tasks (T) assigned to all the functional roles (ZF) existing in the system should be transferred to the positions(S) tagged to those respective functional roles.
For that I am supposed to write a code which copies the entries from Qualifications (Q) and Tasks (T) and tag the same to the positions (S).
Below is the sample code which is adding just one record to HRP1001 through abap statment. What I am curious to know is wheather it is logically correct to update HRP table through abap statments or no. If not, Please let me know what should we do as a solution - should we update all records through LSMW of PP01 or any thing else we can do???
REPORT ZHRPAR0005 .
TABLES: HRP1000, HRP1001.
DATA IT_1001 LIKE HRP1001 OCCURS 5 WITH HEADER LINE..
SELECT SINGLE * FROM HRP1001 INTO IT_1001 WHERE OTYPE = 'CP' AND PLVAR = '01' AND SCLAS NE 'S'.
IT_1001-OTYPE = 'S'.
APPEND IT_1001.
INSERT INTO HRP1001 VALUES IT_1001.
Thanks
Ribhu

Hi Ribhu..
there are various FMs available for this purpose..
use those... becasue if u directly insert, update or modify record in HRP1000 or HRP1001...
then some related table might not be updated..
So use FMs..
RH_COPY_INFTY
RH_CUT_INFTY
RH_DELETE_INFTY
RH_INSERT_INFTY
RH_INVERT_RELA_INFTY
RH_UPDATE_INFTY
For IT 1001
RH_CUT_INFTY_1001_EXT
RH_CUT_INFTY_1001_EXT_GENERIC
RH_DELETE_INFTY_1001_EXT
RH_DEL_INFTY_1001_EXT_GENERIC
RH_INSERT_INFTY_1001_EXT
RH_UPDATE_INFTY_1001_EXT
RH_BASE_READ_INFTY_1001
RH_READ_INFTY_1001
RH_READ_INFTY_1001_EXT
RH_READ_INFTY_1001_EXT_ONLY
Reward if useful
Regards
Prax

Are these key fields in 'Direct Update' DSO table in BW on HANA (BW740SP7) correct?

Similar Messages

Maybe you are looking for